12v solar pool pump
This large solar-operated pump, 1 panel, and battery kit comes with everything you need to set up your DIY outdoor rain barrel irrigation or car washing system. It features a flow rate of at 450 gallons of water per hour and a lift of up to 36 ft high when 3/4-inch tubing is connected to the pump. If 2 panels are equipped, When the power button is on, the pump will run via solar power when the panels are in direct sunlight. When the sun goes down the battery pack will operate the pump for up to half hours on a full charge.Â
AC & DC type are also available.
Applications
Â
Key features
Aluminum corrosion-free telescopic rod is indinitely flexible for different rain barrel height.
 Cordless rain pump could be charged by electric source or solar panel. Fully-charged pumps can be continuously use for more than 30 minutes.Â
Battery box hook easily fix on barrel edge for easy operation.
 Intergrated filter prevent the pump from suctioning too large impurities.
Pump base is faciliate to disassembly and change filter without tool.
 Sturdy pump housing , rust-free stainless steel roter shaft, maintainance-free ball bearings, solid seal make MEDAS pumps particularly durable and problem-free.
Â
.Parameter
Â
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â P E R F O R M A N C EÂ Â C H A RÂ TÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | |||||||||
| Model | HP | Discharge Head | 5' | 10' | 15' | 20' | 25' | 30' | 35' |
| MR2500 | 1/4 | Gallons/Hour | 436 | 407 | 343 | 272 | 198 | 106 | - |
| MR2500 ACCU MR2500 SOLAR | 1/20 | Gallons/Hour | 568 | 528 | 476 | 396 | 304 | 206 | 106 |
Company information
The MEDAS Group is a developing leading industrial in China in the two business
areas of pump and garden care and consumer goods. The MEDAS Group's products
and services are designed to improve the quality of life by providing solutions that
are both innovative and beneficial.
Since being founded in 1997, MEDAS has rapidly emerged as a company spanning
the entire domestic market. MEDAS has always oriented itself towards fostering
talent and technology-based production, guiding our success with customer support
and trust. Almost all our office staff have a bachelor degree or above and vast operational experience, helping to efficiently provide design and experimental operation as well.
The principle of "Quality comes first" is deeply embedded in the heart of every Medaser,
a principle which MEDAS also reflects on the large scale.
Our service
We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.
Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.
Packing and shipping
FAQ
Q: What is our policy of the payment term?
A: -100% advanced payment is the first option we prefer to taking.
-Any order valued less than USD10,000 has to be 100% prepaid.
-Irrevocable L/C at sight is acceptable for most of business.
-Irrevocable L/C with less than 60-day term will be only acceptable for some
business after negotiation.
-Any L/C with more than 60-day term will not be acceptable.
-D/P at sight will be acceptable for some business after negotiation, while other
terms will not be acceptable.
-D/A and O/A will not be acceptable basically.
-Partial payment is negotiable, but normally we require the advanced payment
no less than 30%, and the balance to be paid before shipment
Q: How long will be the lead time for the orders to us?
A: -Normally the lead time for our orders is 45-60 days, depending on the order
quantity and our production schedule.
-Normally the lead time is calculated from the date of receiving the L/C or advanced
payment as agreed in contract.
-Some rush orders might be fulfilled within 30 days or even shorter time, until we
finally approve.
Q: Do we have minimum order requirement?
A: -Yes, the minimum order value has to be USD2,000.
-Any order with less than USD2,000 will be only acceptable after negotiation.
-Sample order is exception.
-As for the minimum quantity for each product, please contact with us for further information.
Â
a kind of corn machine for processing the corn harvesting
Adopts European technology, and improved by our engineer, which has the following operations: Separation of the cob from the stalk, cleaning the cob, transporting the cob into the hopper and discharge the hopper of the trailer.
1. Self-propelled Corn Combine Harvester, hydraulic stepless speed adjustment
2. Hydraulic control lifting, good suitability of height and row spacing.
3. Huge grain tank, hydraulic turning, high efficiency and saves time.
4. Compact structure, advantages of agility, lower loss and impurities.
5. Stalk cutting back to the field meets customer`s requirements.
6. Equipped with reversing radar, improve the driving safety
3)Main technical parameters of the Gold Dafeng Corn Harvester
|
Model |
4YZP-3 |
|
Type |
wheel type, self-propelled |
|
No. of working rows |
3 rows |
|
Row spacing |
450-750MM |
|
Engine Power |
140hp |
|
Ground clearance |
250mm |
|
Diesel tank |
155L |
|
Weight |
5500kg |
|
Dimension(L*W*H) |
62500*2000*3000 mm |
|
Grain tank |
2.5 m³ |
|
Total loss rate |
≤1% |
Three Rows Corn Combine Harvester
Three Rows Corn Combine Harvester,Threshing Combine Harvester,Agriculture Corn Harvester,Corn Cutting Machine
Shandong Gold Dafeng Machinery Co., Ltd , http://www.golddafengharvester.com