Air Source Treatment Unit-Xou Series (Festo FRL)

XOU series Air Source Treatment Unit (Festo type FR+L)


1,Combinations:

1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.

2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available

3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.

4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient

2,Features:


1).FESTO type and quality, can be replaced the Festo same type products.

2).XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)

3).You can use it independent or use the FRL together in the automation area.

4).Smart design and best performance

5).Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.

3,Summary:

Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements


Specifications



This series air source treatment unit accessories also available for you.


Other related in this series types,

XOFR
XOF
XOR
XOL


Our company also can provide other air source treatment as below,

1. AC/BC series(Airtac FRL)
2. XG series(Airtac FRL)
3. XU seres(Shako FRL)
4. XAC series
5. XMA series
6. XS series(SNS FRL)
7. XC series(Camozzi FRL)
8. Auto drain
9. Speacial air filter, regulators

More information and details, you can visit our website.

If you have the nonstandard products want to design, don't hesitate to contact us.

XCPC is your good choice in Pneumatic area ! XOU series Air Source Treatment Unit (Festo type FR+L)


1,Combinations:

1). The XOU consited of XOFR and XOL. Each unit can be ordered separately.

2). The XOF with water separetor cleans the compressed air of fliud oil, condensation and dirt.
For special application, the standard filter element is 40 micron, also 5 micron also available

3). The XOR maintain imputting constant operating pressure despite fluctuation in line pressure and the amount of air consumed.

4). XOL, The proportional lubricator adds a regulated quantity of oil to the filtered air. The oil-mist content
Proportional to be flow and oil can be added during operation.
The oil drop rate is controlled by the adjustable bolt. Normally 1 to 12 drops/1000L of the air is sufficient

2,Features:


1).FESTO type and quality, can be replaced the Festo same type products.

2).XOU, XOFR, XOF, XOL, XOR
XOU included XOFR and XOL(FR+L)
XOFR included XOF and XOR(F+R)

3).You can use it independent or use the FRL together in the automation area.

4).Smart design and best performance

5).Internal element material is PE/Brass, the micron is 40 micron or 5 micron by your choice.

3,Summary:

Air filter combination mainly include filter, regulator, filter regulator and lubricator.
The products used standardized module design, which can be combined freely and disassemble.
Products design are reasonable and easy to regulate, can satisfy all sorts of pneumatic system operating requirements


Specifications



This series air source treatment unit accessories also available for you.


Other related in this series types,

XOFR
XOF
XOR
XOL


Our company also can provide other air source treatment as below,

1. AC/BC series(Airtac FRL)
2. XG series(Airtac FRL)
3. XU seres(Shako FRL)
4. XAC series
5. XMA series
6. XS series(SNS FRL)
7. XC series(Camozzi FRL)
8. Auto drain
9. Speacial air filter, regulators

More information and details, you can visit our website.

If you have the nonstandard products want to design, don't hesitate to contact us.

XCPC is your good choice in Pneumatic area !

    Industrial water chillers/industrial chiller and cooling towers are the most important equipment during plastic molding and processing industry. The air-cooled water chillers and water-cooled water chiillers/Water Chiller are mainly used to reduce the temperature of plastic mould, the machine can reduce the molding cycle time and get a more smooth and perfect plastic products. The cooling towers are always used to cool the oil and hydraulic parts of plastic injection molding achine. Also, the cooling towers are necessary equipment to cooperate with water-cooled chillers, to cool the condenser of chillers.Except them,we also supply Industrial Water Cooling Machine,Water Chilling Machine,industrial water chilling unit.

Water Chiller & Cooling Tower

Industrial Water Chiller,Water Cooling Tower,Water Chiller Machine,Industrial Water Cooling Tower,Water Chilling Machine,Industrial Water Cooling Machine,Water Chiller

Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com