Product Description
1. JIS Standard is implemented.
2. Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
   Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low fraction action process.
     Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.
3. Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.
4. The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ΦPA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.
5. Options of switch mounting with provision 4 mounting slots.
6. Special design of main body provides multi-mount.
Â
Product Description
1. JIS standard is implemented.
2. Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
   Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low fraction action process.
     Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.
3. Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.
4. The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ΦPA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.
5. Options of switch mounting with provision 4 mounting slots.
6. Special design of main body provides multi-mount.
Â
Currently the charging circuit of Harley is designed for AGM Battery, as lithium charging requires more stringent voltage and current, and the charging circuit is more sophisticated. Harley power usually supplies are charged with a constant current, but lithium is sensitive to overcharging. Lead acid is charged at a constant voltage. Lead-acid batteries are not afraid of open circuit, misconnection, short circuit, overload and so on. Lithium is different, although lithium is equipped with a protective plate, but the protection effect is not very good.
Compared with other motorcycle trams, Harley battery reliability and durability have a good guarantee. It can be used for more than three years under proper and reasonable use and maintenance. The Harley battery has the following advantages:
1, the battery electrode design is reasonable, the electrode screw fastening surface is flush with the battery side, can properly tighten the starting motor line, without adding gaskets. Avoid bad contact.
2, the battery is AGM type, that is, the battery using pure sulfuric acid solution as the electrolyte. The cyclic charging capacity is 3 times higher than the traditional storage battery. Also maintenance-free (refers to supplementary electrolyte type).
3. The charging circuit of the Harley motorcyclec is designed for AGM batteries, and the matching degree is higher than other types of batteries.
Harley Series Battery,Harley Davidson Battery,Harley Battery,Harley Sportster Battery,motorcycle battery
Jinhua Juxing Power Supply Co., Ltd , https://www.poweriderbattery.com