After several years of soil moisture monitoring by the soil moisture meter, it was found that in the central and western parts of Jilin Province, the soil moisture content gradually decreased from east to west. In the most serious areas in the west, it was difficult to reach the minimum moisture required for crop growth, resulting in individual cities, counties, and individual In the year, there was a phenomenon of agricultural failure. With the development of drought conditions, the area of ​​drought has gradually expanded to the central economic belt and formed a large area of ​​drought.
Soil moisture content can reflect the size and extent of soil moisture changes, and can be used as an indicator to determine soil moisture. The change in soil moisture content depends on changes in meteorological conditions. The main factors that determine the change in soil moisture content are precipitation, temperature, evaporation, ground temperature, relative humidity, saturation difference, wind speed, and sunshine. There are several major factors for analysis.
The results of the soil moisture meter show that the temperature has an important effect on soil moisture changes by affecting the evaporation of soil moisture. In the winter, when the soil surface is frozen, the surface of the soil is frozen. After the soil is frozen, the loss of soil is relatively slow. In the spring, the temperature of the frozen soil melts as the temperature rises. During this period, the soil moisture evaporates slowly, and the deep water can maintain stable upward migration. The flooding occurs when the crop water requirement is small. The soil moisture content basically meets the crop growth needs; after the early spring, the temperature further rises, the surface water evaporates strongly, the crop transpiration is enhanced, and the precipitation is scarce during the season. Soil moisture Losses increase, often resulting in inadequate or severe shortage of moisture, prone to moderate or severe drought, and extreme droughts can be achieved in individual years.
Angle Punching Machine is special used for angle tower industry, for transmission tower, electric tower, power tower, electric power fittings, structure storage facility, and steel structure industry.
For small steel angle, we have TAPM1010, TAPM1412, which have high speed punching efficiency for high speed feeding cnc carriage.
For heavy angle, TAPM1516, TAPM2020 for angle punching, marking, shearing is more accuracy.
Big project angle tower have to use cnc angle drilling and marking line, which angle size exceed 20mm, 25mm
Plate Drilling Machine is for 1500*800mm, 1500*1000mm working area, thickness within 25mm, TPPD cnc plate drilling and Punching Machine is more competitive.
2000*1200mm, 2000*1600mm, 3000*1600mm, 3000*2000mm steel plate working are could use High Speed CNC Drilling Machine, tighten by T-Slot clamps 12 pcs, 7.5kn each. More power for plate holding.
Beam Drilling Machine have single drilling spindle line and 3 drilling spindles and 9 drilling spindles water cooling, adopted BT40/BT50
H I U Channel steel beam with high efficiency for steel structure.
Angle Punching Machine
Angle Punching Machine,Punch Machine,Punching For Angle Steel,Angle Iron Punching Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com