Vertical Ribbon Mixer looks like vertically standard Ribbon Blender. Our Vertical Ribbon Mixer is suitable for the mixing of especially fine materials or adding of grain materials, as well as the mixing of fluid or half-fluid materials such as very evenly distributed fine powder and paint. The processes adopted are pressurization, vacuum mixing, reaction and adhesion.
Â
Working Principle:
Vertical Ribbon Mixer contains three parts - the mixing barrel, mixing helix and flying blades. The coagulated material is cut when the middle helix moves circularly and the flying blades on the barrel side circulate. Vertical Ribbon Mixer is a central tapered ribbon with very small clearance between the edge and the wall. The ribbon moves the materials upward along the vessel wall to the top, the materials then drop by gravity into the center as well.
Features:
1) Materials: Carbon steel, stainless steel
2) Batch capacity: 300--15, 000kg
3) Huge volume, easy to clean and maintain
4) Spraying device can be added to the mixing arm
5)Price Terms: FOB, CIF
6)Delivery Lead Time: 10 - 60 days
Datasheet:
| Model Project | All volume (M3) |
Loads coefficient | Electrical machiney power (KW) |
Size(mm)× Max-diameter ×High | Equipment weight (kg) |
| GPH-0.1 | 0.1 | 0.4-0.6 | 1.5 | Φ1100×1229 | 700 |
| GPH-0.3 | 0.3 | 0.4-0.6 | 4 | Φ1350×1696 | 850 |
| GPH-0.5 | 0.5 | 0.4-0.6 | 4 | Φ1575×1689 | 1300 |
| GPH-1 | 1 | 0.4-0.6 | 7.5 | Φ1900×2262 | 2000 |
| GPH-1.5 | 1.5 | 0.4-0.6 | 11 | Φ2200×2692 | 3300 |
| GPH-2 | 2 | 0.4-0.6 | 15 | Φ2650×2897 | 3600 |
| GPH-3 | 3 | 0.4-0.6 | 18.5 | Φ2400×3267 | 4300 |
| GPH-4 | 4 | 0.4-0.6 | 18.5 | Φ2600×3407 | 5500 |
| GPH-5 | 5 | 0.4-0.6 | 22 | Φ2600×3347 | 7500 |
| GPH-6 | 6 | 0.4-0.6 | 37 | Φ2650×3637 | 8100 |
| GPH-8 | 8 | 0.4-0.6 | 45 | Φ3200×4195 | 9800 |
| GPH-10 | 10 | 0.4-0.6 | 55 | Φ3820×4307 | 11000 |
| GPH-12 | 12 | 0.4-0.6 | 55 | Φ3820×4657 | 13000 |
| GPH-15 | 15 | 0.4-0.6 | 55 | Φ3820×5082 | 15000 |
2.    Changes are available according to customer's special requirement;
3. Â Â Shuang Long Group might develop new data which is not modified timely on the Web.
Application:
Amrta air handling unit with colorful steel and galvanized panel as its interior and exterior panel. Inner stuff is the high density polyurethane foam. Case thickness 25mm or 50mm to strength the unit and avoid air leakage.
Advanced Internal Equipment
1.Direct Driven and No Volute Frequency Conversion Fan Using authoritative certificate and high efficient no volute frequency conversion fan with high transfer efficiency, no belt wear and stable operation. Meanwhile, the no volute fan is open-type structure and convenient to maintenance and clean, especially applied to the clear room.
2.Naked Tube Heater. The heat exchang pipe of the heater is made of stainless steel, smooth surface, without spiral fin, preventing accumulation of dust and breeding of bacteria.
3.Flexible and high-efficient antibacterial heat exchanger. The heat exchanger is designed by special computer auxiliary software, whose performance strictly meets the requirement of national standard of clean room. Hydrophilic aluminum fin or copper fin is applied, thus avoiding the air through the coil to take the condensing water covering on the surface of coil away. Meanwhile it also can prevent the breeding of bacteria.
4.Steam-type Humidifier. The unit uses electrode and dry steam to humidify, avoiding the humidified circumstance to keep from the breeding of bacteria.
5.High quality filter. The unit can use various filters with different degrees to meet customer's requirements, thus optimizing its performance.
6.Optimized Design. Fan placed in the front make sure the unit is under positive pressure to prevent the outside air from leaking, which will pollute the clear air in the unit. And the condensate water can be drained because of positive pressure.
DX Type Air Handling Unit
DX Type Air Handling Unit,DX type Modular Air Handling Unit,Special Air Handling Unit,Hygiene Grade Air Handling Unit
Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl