Caterpillar introduces D-Series hydraulic excavator

Caterpillar Inc. has developed a new D-Series hydraulic excavator that is more efficient, flexible and versatile than the replacement C-Series excavator.
The new D-Series hydraulic excavators are available in three products: 324D L, 324D L and 330D L. Caterpillar claims that the range of excavators is the smallest of any excavator due to Caterpillar's ACERT engine technology.



Caterpillar also said: "The new cab is more spacious and the overall design is also significantly different from the previous equipment."
These three new excavators are more powerful than the previous generation and increase the pressure on the hydraulic system. Caterpillar says this will increase the ability to break and boost, reduce work cycle time, and increase efficiency.
Caterpillar said, "The weight of the D-series is set to the standard mode of the product. As long as the switch is activated, the hydraulic system will automatically increase the system pressure and enhance the weightlifting performance of the equipment."


324D L
325D L
330D L

Machine quality (kg)
24,790
29,240
36,150

engine
Cat C7 ACERT
Cat C7 ACERT
Cat C9 ACERT

Rated power (hp)
188
204
268

Bucket digging force (KN)
163
176
188.5

Maximum digging distance (m)
10.55
11.15
11.71

Maximum depth of digging (m)
7.33
7.83
8.18


Table: Caterpillar New D Series Excavator Parameters

The 324D L is the smallest of the three new devices, with a weight of 24.8 tons and an engine power increase of 12% over the previous generation 322C L.
The 325D L weighs 29.24 tons and the power is 8% higher than the previous generation 325C L. The 330D L has a mass of 36.15 tons and an engine power increase of 9% over 330C L.
The D-series excavator is equipped with an original pre-installed additional hydraulic system, including a dedicated one-way high-pressure hydraulic circuit such as a breaker and hydraulic shock. It also includes a two-way hydraulic circuit that can be equipped with a variety of other hydraulic machine tools.
The D-Series tooling control system allows operators and technicians to set the flow and pressure required by the hydraulic system through the monitor in the cab without having to use expensive tools.
Customers can preset and store up to 10 different hydraulic flow and pressure modes as needed to accommodate different hydraulic machine tools.
The other two smaller units are equipped with a Cat C7 engine and the 330D L is equipped with a Cat C9 engine.
Fuel control uses Caterpillar's ADEM A4 electronic control module to maximize unit fuel efficiency, while the engine control system provides a flexible fuel solution that allows the engine to react quickly to changes in actual demand.
To reduce power consumption and noise, the 330D L uses a hydraulically driven fan controlled by an electronic control module to dissipate heat, and the fan speed automatically varies with system cooling requirements.

Precision Prototypes

Precision Prototypes,Precision Model,Machined Prototype,Precision Prototype

ShenZhen Jakeconn Precision Technology Co., Ltd. , https://www.jkpmoulds.com