From August 10th to August 12th, seven APPM technical experts from Japan, Singapore, South Korea and Taiwan respectively calculated the amount of geometry and quality related to the expiration and new declaration of the China Academy of Metrology. , Acoustic vibration, ionizing radiation calibration and measurement capability (CMC) were peer reviewed and involved more than 300 projects. This is the continuation of the second round of international peer review in 2008 and was jointly reviewed by the China National Accreditation Service for Conformity Assessment (CNAS) and Asia Pacific Metrology Planning Organization (APMP).
Measurement is the foundation of industry, quality, and fair trade. With the progress of industrialization, quality certification, and international trade, measurement of traceability and conformity is continuously increasing, and the role of metrology in national economic construction and social development is increasing. The metrology institutes of various advanced countries attach great importance to their own calibration and measurement capacity building. The international metrology and mutual recognition activities aiming at international comparison and calibration measurement capacity building are affecting the economy and trade of all countries and constantly refreshing the starting point for capacity building. China Institute of Metrology began accepting international peer review in 2002. At present, 735 calibration and measurement capabilities (CMCs) have been reviewed and published in the BIPM key comparison database KCDB.
In order to promote the measurement and measurement results of China Institute of Metrology for calibration measurement and results to gain mutual trust both at home and abroad, according to the provisions of the BIPM and APMP related peer review, from 2008 onwards, the Institute will adopt the domestic and international joint assessment approach to organize the CMC project. Second round of international peer review. The joint assessment is an innovation in the assessment system of our institute. It not only satisfies the international and domestic requirements, but also simplifies the review process, reduces the burden of repeated review, improves the quality of the assessment, and achieves the enhancement of capabilities, level of display, establishment of authority, and expansion. The purpose of the impact. The second round of assessment of the hospital will continue until the end of 2010.
Leaders of relevant majors and laboratory personnel attach great importance to this review, and conduct professional and technical exchanges with experts in an active, serious, and responsible attitude. The experts of the assessment team gave a high evaluation of the hospital's calibration and measurement capabilities, and gave unanimous approval and praise to the hospital staff for their comprehensive capabilities, equipment levels, and environmental facilities. In the evaluation reports for electroacoustics, ultrasound and vibration, the review experts clearly pointed out that the acoustics and vibration laboratory will become a world-class laboratory under the conditions of weather, geography, and people. In addition, APMP experts also agreed that this is not just a review, but also a deeper level of technical and academic exchanges. In this way, APMP members can be more closely united to form a strong regional competitiveness advantage.
Background information:
With the process of global economic integration, trade globalization and investment facilitation have become the mainstream of international economic development in the 21st century. In order to promote the healthy development of the global economy, the International Metrology Committee (CIPM) has created the Mutual Recognition Agreement for Measurement and Standardization (MRA) signed by each country's metrology base (standard) mutual recognition and the national metrology institutes.
In October 1999, the National Institute of Metrology and the two international organizations (AIEA/IAEA and IRMM) of 38 METs, including the China Metrology Institute, took the lead in signing the agreement. After 10 years of development, the signatory countries have expanded. To 78 members, there are 133 institutions involved in most developed countries and regional members of the WTO. The purpose of CIPM MRA is to establish a global equivalent measurement system for the global economic integration process, gradually establish mutual recognition of measurement capabilities and results among countries, and provide mutual recognition of calibration and measurement certificates issued by national metrology institutes for the government and A reliable technology platform is provided between other groups to establish wider mutual recognition in international trade, commerce, legal affairs and market access. Its significance and role have been recognized by OIML and international laboratories. Recognized by the International Cooperation Agency (ILAC), the International Atomic Energy Agency (IAEA), the United Nations Industrial Development Organization (UNIDO) and other international organizations.
Measurement is the foundation of industry, quality, and fair trade. With the progress of industrialization, quality certification, and international trade, measurement of traceability and conformity is continuously increasing, and the role of metrology in national economic construction and social development is increasing. The metrology institutes of various advanced countries attach great importance to their own calibration and measurement capacity building. The international metrology and mutual recognition activities aiming at international comparison and calibration measurement capacity building are affecting the economy and trade of all countries and constantly refreshing the starting point for capacity building. China Institute of Metrology began accepting international peer review in 2002. At present, 735 calibration and measurement capabilities (CMCs) have been reviewed and published in the BIPM key comparison database KCDB.
In order to promote the measurement and measurement results of China Institute of Metrology for calibration measurement and results to gain mutual trust both at home and abroad, according to the provisions of the BIPM and APMP related peer review, from 2008 onwards, the Institute will adopt the domestic and international joint assessment approach to organize the CMC project. Second round of international peer review. The joint assessment is an innovation in the assessment system of our institute. It not only satisfies the international and domestic requirements, but also simplifies the review process, reduces the burden of repeated review, improves the quality of the assessment, and achieves the enhancement of capabilities, level of display, establishment of authority, and expansion. The purpose of the impact. The second round of assessment of the hospital will continue until the end of 2010.
Leaders of relevant majors and laboratory personnel attach great importance to this review, and conduct professional and technical exchanges with experts in an active, serious, and responsible attitude. The experts of the assessment team gave a high evaluation of the hospital's calibration and measurement capabilities, and gave unanimous approval and praise to the hospital staff for their comprehensive capabilities, equipment levels, and environmental facilities. In the evaluation reports for electroacoustics, ultrasound and vibration, the review experts clearly pointed out that the acoustics and vibration laboratory will become a world-class laboratory under the conditions of weather, geography, and people. In addition, APMP experts also agreed that this is not just a review, but also a deeper level of technical and academic exchanges. In this way, APMP members can be more closely united to form a strong regional competitiveness advantage.
Background information:
With the process of global economic integration, trade globalization and investment facilitation have become the mainstream of international economic development in the 21st century. In order to promote the healthy development of the global economy, the International Metrology Committee (CIPM) has created the Mutual Recognition Agreement for Measurement and Standardization (MRA) signed by each country's metrology base (standard) mutual recognition and the national metrology institutes.
In October 1999, the National Institute of Metrology and the two international organizations (AIEA/IAEA and IRMM) of 38 METs, including the China Metrology Institute, took the lead in signing the agreement. After 10 years of development, the signatory countries have expanded. To 78 members, there are 133 institutions involved in most developed countries and regional members of the WTO. The purpose of CIPM MRA is to establish a global equivalent measurement system for the global economic integration process, gradually establish mutual recognition of measurement capabilities and results among countries, and provide mutual recognition of calibration and measurement certificates issued by national metrology institutes for the government and A reliable technology platform is provided between other groups to establish wider mutual recognition in international trade, commerce, legal affairs and market access. Its significance and role have been recognized by OIML and international laboratories. Recognized by the International Cooperation Agency (ILAC), the International Atomic Energy Agency (IAEA), the United Nations Industrial Development Organization (UNIDO) and other international organizations.
A manual chain block (also known as a hand chain Hoist) is a mechanism used to lift and lower heavy loads using a chain. Manual chain blocks contain two wheels which the chain is wound around. When the chain is pulled, it winds around the wheels and begins to lift the item that is attached to the rope or chain via a hook.Manual chain blocks lift and maneuver heavy loads short distances without the need for power, it is hand operated. The manual chain block is suitable for lifting relatively light objects and relatively short distance.
Manual Chain Block,Manual Chain Hoist,Manual Hoist,Hand Chain Block,Hand Chain Hoist
Eurocrane (China) Co., Ltd. , https://www.crane-kit.com