In recent years, with the development of the national economy, the improvement of people's requirements for the quality of life, many products not only require their drying, but also their color, aroma, taste and reconstitution properties (cold or instant). ), vitamin activity retention rate, etc. put forward higher requirements for the total yield of some valuable drugs is also very harsh. These requirements are the requirements of the international market for China after entering the WTO. The following outlines our country's new device developed in the field of spray dryers in response to the requirements of the objective market. The common feature of these devices is that instead of using a single spray dryer as a commercial product, a spray dryer is used as the core, and according to the characteristics of the materials, other drying devices or auxiliary equipment combined drying equipment systems are used to make their final products meet User needs. In addition, the basic trend of large-scale, high-strength, high-economy, and spray dryer development to improve the adaptability of raw materials and product quality. At the same time, the development of spray dryers should pay attention to the comprehensive utilization of energy-saving and energy, as well as the development of dryer automatic control technology, in order to ensure the realization of the best operating conditions. In addition, as humans attach importance to environmental protection, improved spray dryers to reduce dust and exhaust gas leakage will also be studied in the depth direction.
The research and development of spray drying technology and equipment for ceramics in China began in the late 1970s. The use of 2000-type pressure spray dryers in industrial production began in the mid-1980s, and now domestic spray dryers for ceramics industry have national standards. And serialized. Over the years, the world’s ceramics industry has debated the development of two types of technical processes: spray drying mechanism powder and direct dry milling. The relevant government departments have also established projects for the dry process project and identified the results. At present, the spray dryer is one of the most widely used dryers in a large number of drying apparatuses, and is a drying apparatus for treating a solution, a suspension, or a muddy material. The ability to dry directly from a liquid into a powder is the biggest advantage of a spray dryer; its disadvantages include low thermal efficiency, bulkiness, low productivity, and high investment. Spray drying has the special advantages of powdered products which can be directly obtained from the solution or suspension system. It is currently widely used in chemical, light industry, food and other industries. The dye industry is the most widely used in the chemical industry.
At present, China's dry products have begun to enter a more mature stage of development, and can better meet the actual needs of users in various fields, and in the price only 1/3 of the same foreign products, which makes China's drying equipment in the market competition than imports The equipment has obvious price advantages. On the other hand, due to the large volume of drying equipment, most of them involve on-site installation, commissioning and after-sales service. Therefore, for domestic users, it is more convenient to use domestic equipment than to use imported equipment. In the international competition, the main competitors of China's drying equipment manufacturers are Denmark, Switzerland, the United Kingdom, Germany, the United States, and Japan. Compared with competitors, the advantages of drying equipment in China are low prices.
Spray dryers are the most widely used industrial process for the formation and drying of particles. The spray dryer is a dry solid from a liquid raw material powder, granule or agglomerate particle form suitable for continuous production. Spray drying is ideal when the final product must meet exacting quality standards regarding particle size distribution, residual moisture content, bulk density and particle morphology. Spray dryer design and technology provide the ability to control the production of powdered powders by spray drying. The design, production performance, such as particle size, bulk density, moisture content, solubility, dispersibility, etc. of GEA Niro spray dryer are exactly what the user wants. This product is suitable for all pumpable products, whether it is hot or not sensitive to heat.
There are three types of atomizing spray dryers: the first rotary atomization, the second pressure atomization, and the third airflow atomization.
Rotary atomization spray dryer is characterized by: single machine production capacity (spray maximum up to 200t / h), easy to control the amount of feed, operating flexibility, application is more extensive.
Pressure atomized spray dryer is characterized by: It can produce coarse particles, easy maintenance. Because the nozzle hole is small and easy to block, the material must be strictly filtered. The nozzle holes are easy to wear and must be made of wear-resistant materials. Pressure nozzles also have a new structure called pressure-air flow nozzles. It is characterized by a pressure-type nozzle in the center and an ambient air-gap around the ambient space. The atomization is divided into two stages: the pressure nozzle first forms a liquid film, and this liquid film is atomized for the second time to make the droplet finer. The advantages of this type of nozzle are: (1) adjusting the pressure of the compressed air, the diameter of the droplet can be adjusted, and the operation is simple; (2) the high-yield, high-viscosity material liquid can also be atomized into fine droplets; 3 If the compressed air is deactivated, the original pressure nozzle can also be used.
Airflow atomized spray dryers are mainly used in laboratories and intermediate factories. The first two kinds of atomizers can't atomize the material liquid, and can be atomized by the air atomizer. High viscosity pastes, pastes, and filter cake materials can be atomized using a three-fluid nozzle. The disadvantage is the power consumption.
The research and development of spray drying technology and equipment for ceramics in China began in the late 1970s. The use of 2000-type pressure spray dryers in industrial production began in the mid-1980s, and now domestic spray dryers for ceramics industry have national standards. And serialized. Over the years, the world’s ceramics industry has debated the development of two types of technical processes: spray drying mechanism powder and direct dry milling. The relevant government departments have also established projects for the dry process project and identified the results. At present, the spray dryer is one of the most widely used dryers in a large number of drying apparatuses, and is a drying apparatus for treating a solution, a suspension, or a muddy material. The ability to dry directly from a liquid into a powder is the biggest advantage of a spray dryer; its disadvantages include low thermal efficiency, bulkiness, low productivity, and high investment. Spray drying has the special advantages of powdered products which can be directly obtained from the solution or suspension system. It is currently widely used in chemical, light industry, food and other industries. The dye industry is the most widely used in the chemical industry.
At present, China's dry products have begun to enter a more mature stage of development, and can better meet the actual needs of users in various fields, and in the price only 1/3 of the same foreign products, which makes China's drying equipment in the market competition than imports The equipment has obvious price advantages. On the other hand, due to the large volume of drying equipment, most of them involve on-site installation, commissioning and after-sales service. Therefore, for domestic users, it is more convenient to use domestic equipment than to use imported equipment. In the international competition, the main competitors of China's drying equipment manufacturers are Denmark, Switzerland, the United Kingdom, Germany, the United States, and Japan. Compared with competitors, the advantages of drying equipment in China are low prices.
Spray dryers are the most widely used industrial process for the formation and drying of particles. The spray dryer is a dry solid from a liquid raw material powder, granule or agglomerate particle form suitable for continuous production. Spray drying is ideal when the final product must meet exacting quality standards regarding particle size distribution, residual moisture content, bulk density and particle morphology. Spray dryer design and technology provide the ability to control the production of powdered powders by spray drying. The design, production performance, such as particle size, bulk density, moisture content, solubility, dispersibility, etc. of GEA Niro spray dryer are exactly what the user wants. This product is suitable for all pumpable products, whether it is hot or not sensitive to heat.
There are three types of atomizing spray dryers: the first rotary atomization, the second pressure atomization, and the third airflow atomization.
Rotary atomization spray dryer is characterized by: single machine production capacity (spray maximum up to 200t / h), easy to control the amount of feed, operating flexibility, application is more extensive.
Pressure atomized spray dryer is characterized by: It can produce coarse particles, easy maintenance. Because the nozzle hole is small and easy to block, the material must be strictly filtered. The nozzle holes are easy to wear and must be made of wear-resistant materials. Pressure nozzles also have a new structure called pressure-air flow nozzles. It is characterized by a pressure-type nozzle in the center and an ambient air-gap around the ambient space. The atomization is divided into two stages: the pressure nozzle first forms a liquid film, and this liquid film is atomized for the second time to make the droplet finer. The advantages of this type of nozzle are: (1) adjusting the pressure of the compressed air, the diameter of the droplet can be adjusted, and the operation is simple; (2) the high-yield, high-viscosity material liquid can also be atomized into fine droplets; 3 If the compressed air is deactivated, the original pressure nozzle can also be used.
Airflow atomized spray dryers are mainly used in laboratories and intermediate factories. The first two kinds of atomizers can't atomize the material liquid, and can be atomized by the air atomizer. High viscosity pastes, pastes, and filter cake materials can be atomized using a three-fluid nozzle. The disadvantage is the power consumption.
SME Polyurethane Pump Parts are made of soft, medium and hard wear resistant polyurethane.
Polyurethane is an erosion resistant material that performs well in elastomer applications where
tramp is a problem. This is attributed to the high tear and tensile strength of polyurethane.
However, its general erosion resistance is inferior to that of natural rubber.
"OEM" Polyurethane Parts: PU Screen for Crushing Machines
Polyurethane Pump Parts
Polyurethane Pump Parts,Slurry Pump Polyurethane Parts,Pump Spare Parts,Pump Polyurethane Liner
Shijiazhuang Minerals Equipment Co., Ltd , http://www.smepump.com