Q47-type fixed ball valve is a new generation of high-performance ball valve for long-distance pipelines and general industrial pipelines, its strength, safety, resistance to harsh environments and other special considerations in the design, applicable to a variety of corrosive and non-corrosive Sexual media. It is compared with the floating ball valve, work, the valve fluid pressure in front of the ball on the force generated are all transmitted to the bearing, the ball will not move to the seat, so the seat will not withstand excessive pressure, so the fixed ball valve Small torque, small deformation of the valve seat, stable sealing performance, long service life, suitable for high pressure, large diameter occasions. Advanced spring pre-seat assembly with self-tightening features for upstream sealing. Each valve has two seats, each direction can be sealed, so there is no flow restrictions installation is two-way. The valve has two types and three types of two valve body structure, flange connection with bolts, sealed with PTFE reinforced inlaid stainless steel ring, the back of the ring without spring to ensure that the valve seat close to the ball, keep seal. No upper and lower stem PTFE bearings to reduce friction, the operation of labor-saving, no adjustment at the bottom of the small shaft to ensure that the ball and seal the junction location. Full diameter: the valve flow aperture and pipeline diameter, in order to clean the pipeline (1) the operation of labor-saving: the ball from the upper and lower bearing support to reduce friction, eliminating the inlet pressure to promote the ball and sealing seat to form a huge sealing load caused by excessive Torque. (2) Reliable sealing performance: The PTFE single-material sealing ring is embedded in the stainless steel valve seat. The end of the metal valve seat is provided with a spring to ensure that the sealing ring has enough pre-tightening force. When the sealing surface of the valve is worn during use, The lower valve continues to ensure good sealing performance. (3) fire structure: To prevent the emergence of sudden heat or fire, the PTFE seal burned, a larger leak, and to promote the fire, the ball and seat set up a fire seal ring, the seal burned , Under the spring force, the valve seat ring quickly push the ball, the formation of metal and metal seals, play a certain degree of sealing effect. Fire test in line with APl 6FA and APl 607 standards. (4) automatic pressure relief function: When the valve medium chamber stagnant abnormal increase in pressure exceeds the spring preload, the seat back from the ball, to achieve the effect of automatic relief pressure Relief Valve seat automatically reset. (5) Discharge pipe: the body is set up excretory larvae L, can check the valve seat for leaks, at work, the valve is fully open or fully closed, the removal of the cavity pressure can be directly replaced filler; can be discharged Cavity retentions, reducing the media on the valve pollution. (6) This valve is designed with an auxiliary valve seat emergency seal system. Once the seal is damaged or there is an emergency situation that can not be sealed, the auxiliary seal system can be used to seal the seal face Injection of the corresponding sealant to repair the sealing surface, to achieve an emergency seal. When the medium to be conveyed is dirty or contains a small amount of particles, a suitable cleaning agent or lubricant is injected into the unit to clean the sealing surface in order to protect the sealing surface and ensure a reliable seal. (7) Widely used in food, medicine, petroleum, chemical, natural gas, steel, environmental protection, paper and other transmission pipeline media cut off or circulation. This device can also be injected with the appropriate cleaning agent or lubricant to clean the sealing surface. More Search Keywords: Ball Valve
• Used in hydraulic system.
• Filter media is Complex Fiber.Resin-Impregnated Paper.Stainless
Steel Sintered Metal Mesh,control cleanliness effectively.
• First bubble point per ISO2942.
• Flow resistance per ISO3968.
• Retained capacity and Filter efficiency per ISO16889.
• Mass filtration precision for choose.
• The size can make to order according to the customer's demand
Hydraulic Filter Element Series
Filter Element ,Filter Element In Servo System,Servo System Filter Element,Servo Valve Filter Element
XINXIANG PINGYUAN AVIATION HYDRAULIC EQUIPMENTS CO.,LTD , https://www.coupling.pl