Electrostatic Precipitator/ Esp Dust Collector

  • Model NO.: ESP
  • Installation
    Method:     Horizontal
  • Medium Material: Metal Fiber
  • Type: Filter Cartridge Dust Collector
  • Price: Negotiation
  • Usage: Electrical Equipment
  • Water Pollution Control Equipment Type: Physical Treatment Equipment
  • Air Pollution Control Equipment Type: Dust Removal Equipment
  • Noise Control Equipment Type: Silencer Equipment
  • Transport Package: Pallet
  • Origin: China
  • Certification: CE, ISO
  • Operation
    Type:     Automatic
  • Dust Collecting Method: Dry
  • Color: Customized
  • Function: Main Equipment
  • Processing Methods: Physics
  • Pullution Sources: Air Pollution Control
  • Solid Waste Disposal Facilities Type: Recycling Equipment
  • Trademark: ANTAI
  • Specification: ISO9001, CE
Product Description:

Its working principle is that when the smoke passes through the flue before the main structure of the dust collector, the smoke is positively charged, and then the smoke enters the channel of the electrostatic precipitator with a multi-layer cathode plate. Because of the mutual adsorption between positive charge dust and cathode plate, the particles of smoke dust adsorb on the cathode and strike the cathode plate regularly, so that the smoke dust with a certain thickness falls into the dust bucket under the structure of the electrostatic precipitator under the double action of gravity and vibration, thus achieving the purpose of removing smoke dust from the smoke. Because of the large power of thermal power plants, such as 600,000 kilowatt units, the amount of coal burning per hour is about 180T, the amount of smoke and dust can be imagined. Therefore, the corresponding ESP structure is also relatively large. The cross-sectional dimension of the main structure of the ESP used in thermal power plants is about 25-40*10-15m. If the height of the ash hopper and the space height of smoke transport are added to the ESP, the height of the whole ESP is above 35 meters. For such a large steel structure, not only the independent, smoke and dust loads, but also the wind loads should be considered. Static and dynamic analysis under earthquake load. At the same time, the stability of the structure must also be considered.

Electrostatic precipitator:
The main structure of the ESP is steel structure, all welded by section steel (as shown in Figure 10 - shown), the outer surface covered with skin (thin steel plate) and insulation materials, for the convenience of design, manufacture and installation. The structure design adopts the layered form, each piece is composed of several girders of frame type, and the girders are connected between the pieces. In order to install the skin and insulation layer, the secondary beams are welded between the main beams. For such a huge structure, how to connect the beams according to the physical object, the workload and the number of elements will be very huge. According to the actual design requirements of the project and the design of the main structure of the electrostatic precipitator, the structural strength, structural stability and the maximum displacement of the main beam suspended cathode plate are mainly investigated. For the local area, the fatigue damage of the connection between the cathode plate and the main beam under long-term periodic impact is mainly investigated; the optimum frequency of dust shedding on the cathode plate is selected; the optimum stiffness of the connection between the structure surface skin (thin plate) and the main beam and the secondary beam under wind load is selected. In addition, the controller of ESP is also an important part of it, commonly used is: ALSTOM EPIC III and so on. The main function of the control dust collector is to regulate the operation of the electric field and control the charge to the dust. Intelligent controllers such as EPIC III of ALSTOM can further improve the efficiency of energy saving and emission reduction.
 
Type Air Volume
(m3/h)		 Filter Bag Qty
(Pcs)		 Filter Bag Size
(mm)		 Dust Collector Size
(mm)		 Dust Collector Weight (KGS) Shipment  Volume
(M3)		 Compressed Air Required
(m3/min)
DMC-24 864 - 2700 24 130 X 2000 1400 X 800 X 5500 800 4.48 0.27
DMC-36 1296 - 4050 36 130 X 2000 1400 X 1200 X 5500 1200 6.72 0.30
DMC-60 2160 - 6750 60 130 X 2000 2200 X 1200 X 5500 2000 10.56 0.37
DMC-72 2592 - 8100 72 130 X 2000 2000 X 1600 X 5500 2400 12.80 0.46
DMC-100 4560 - 14250 100 130 X 2500 2200 X 2000 X 6000 3340 19.80 0.55
DMC-120 5472 - 17100 120 130 X 2500 2200 X 2400 X 6000 4000 23.76 0.75
DMC-150 6840 - 21375 150 130 X 2500 2200 X 3000 X 6000 5000 29.70 1.00
DMC-200 9120 - 28500 200 130 X 2500 2200 X 4000 X 6000 6660 39.60 1.20
DMC-280 12768 - 39900 280 130 X 2500 2200 X 5600 X 6000 9300 55.44 1.50
DMC-400 37440 - 117000 400 130 X 5000 2200 X 8000 X 8500 13300 123.20 1.80
DMC-560 52416 - 163800 560 130 X 5000 2200 X 11200 X 8500 18600 172.48 2.00
DMC-840 78624 - 245700 840 130 X 5000 2200 X 8400 X 8500 X 2 28000 258.72 2.75
DMC-960 89856 - 280800 960 130 X 5000 2200 X 9600 X 8500 X 2 32000 295.68 3.00

Electrostatic Precipitator/ Esp Dust Collector

Electrostatic Precipitator/ Esp Dust Collector
Electrostatic Precipitator/ Esp Dust Collector
Electrostatic Precipitator/ Esp Dust Collector
Electrostatic Precipitator/ Esp Dust Collector
Electrostatic Precipitator/ Esp Dust Collector

Our Service

What Service Antai can supply?

1. Our engineers can work separately according to the requirements of design for clients of the equipment. and send a customer confirmation to help customers to save costs.

2. During the manufacture of the equipment, we photograph product production progress, and sent to the customer to track the progress.

3. The goods hair go, we will send the original documents for the customer (such as packing list, bill, CO, Form E, Form A, Form F, Form M, B/L etc.)

4. We can provide customers with free English foundation drawing, installation drawings, manuals, maintenance manuals and parts drawings.

5. We can send our engineers to installation and debugging overseas, and free training of operators and maintenance workers.

6. We have a set of After-sales service system, A ID will be sent to each customer, they can log in this system that view all information to buy equipment and parts by it. We provide 24-hour online consultation.

FAQ

1. How many days do you need to produce this machine?
This is specially designed machine according to your specific requirement. From engineer designing to production completion, It needs about 45-50 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very begining to the end of production. Every machine will be fully assembled and carefully tested before shipment.
3. What's your machine quality guarantee?
Quality guarantee time is one year, we choose world famous brand components to keep our machine in perfect working condition.
4. Are you able to give installation and commissioning overseas? How long will it take?
YES, we supply overseas service, but customer needs to pay for the engineers flight tickets and hotel foods.
Small machine usually takes within 5 days.
Big machine usually takes about 20 days.
5. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. The core of our company culture is innovation,quality, integrity and efficiency. Antai is ALIBABA'S Golden supplier with BV &TUV assessment. You can check with ALIBABA, we have never got any complaint from our customers.


Contact

Contact : Richard.Lee
 

 


 

This series of injection molding machine is mainly suitable for processing various bottle caps. 

According to customer's production requirement, small size and middle size machine can be provided. 

Also we have PET special machine to produce PET preforms. 

Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power. 

Program control adopts multiple CPU and high-end DSP chip, which guaranteed smooth and stable control property during high load processing. 

BUlk-storage memory that can store many groups of technological parameter. 

The application of USB can realize online updating, data export and simple operation. 

Mold Workshop

Plastic Bottle Caps Making Machines

Plastic Bottle Caps Making Machines,Full Automatic Plastic Bottle Cap,Pet Preform Injection Molding Making Machine,Bottle Cap Making Machine

Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com