Relevant experts believe that to develop energy-saving fan products, we must start with product design and start with the operation of the wind turbine.
First of all, in terms of design, through the extensive application of scientific research results such as impellers, volutes and other components, the manufacturing precision is further improved, and the efficiency of various ventilators is sought to increase by an average of 5% to 10%. At present, the most advanced centrifugal fan has a maximum efficiency of 87% due to the adoption of a three-dimensional flow impeller. The maximum efficiency of the axial flow fan has reached more than 92%.
For example, in 1992, the Shenyang Blower Research Institute developed a 4-71, 4-74 three-component flow centrifugal centrifugal fan that was successfully developed for the replacement of medium and low pressure centrifugal fans. It is a new energy-efficient product, and its efficiency is higher than that of similar old-style fans. Increase by 4%. The average annual electricity consumption per wind turbine is about 2,000 kilowatts per hour. However, due to the troublesome manufacturing process of the ternary flow blade used by the fan, the manufacturing cost is higher than that of a common blade fan, and the high technology transfer fee of the product increases the manufacturing cost of the entire fan, which exceeds the endurance of the user. Can not be fully promoted throughout the industry.
Second, the use of the introduction of international advanced technology to promote the development of energy-saving fan products. For example, Shanghai Blower Works Co., Ltd. and Shenyang Blower (Group) Co., Ltd. have introduced adjustable-shaft axial flow fan technology from German TLT and Danish Novenco, respectively; Chengdu Electric Machinery Factory and Shenyang Blower (Group) Co., Ltd. have introduced KKK Corporation's static blade adjustable axial flow fan technology; Wuhan Blower Co., Ltd. introduced the Mitsubishi Heavy Industries, Japan's adjustable blade axial flow fan technology; Guangzhou Fan Factory introduced the Danish company Nordisk ventilation company's axial flow and Centrifugal fan technology; Chongqing General Motors (Group) Co., Ltd. and Siping Jinfeng Co., Ltd. introduced the high-temperature blower technology of the British company Gaudeng; Shijiazhuang Fan Factory Co., Ltd. introduced the EBARA company's centrifugal fan manufacturing technology.
In addition, whether fan products are energy-efficient or not, it is important to adjust the transmission mechanism and change operating conditions. At present, most of the wind turbine transmission mechanisms are relatively backward, and individual products use traditional V-belts, turbines, etc. as the speed-regulating devices, and most of them use adjustment gate adjustments. Due to the above reasons, although some fans have high efficiency (up to 86%), their device efficiency is only 30%. With the application of hydraulic couplers and frequency converters in fans, the operational efficiency of fans has been greatly improved, but the number of applications is extremely limited.
At the same time, efforts to develop energy-saving blowers should also be vigorously carried out during the “11th Five-Year Plan†period. In this regard, foreign countries have taken the lead. For example, Japan has made appropriate improvements to the shape of the through-flow parts such as the volute and impeller, effectively preventing eddy current and flow separation, and its adiabatic efficiency is 5% to 10% higher than that of the original centrifugal blower; Centrifugal blower, each level is equipped with imported guide vane device, its multi-variable efficiency of 82%; Japan-made multi-stage centrifugal blower, the use of imported guide vanes automatically after continuous adjustment, energy-saving rate of 20%; high-speed single-stage centrifugal After the blower adopts a high-speed, high-pressure ratio semi-open radial ternary impeller, its efficiency can be increased by 10%; there is an exhaust turbine device at the other end of the blower spindle, which not only meets the environmental protection requirements, but also achieves energy-saving goals. . The Roots blower has adopted a three-lobe Roots blower, which saves energy and reduces noise.
In the development of centrifugal compressors, more ternary flow impellers should be used to increase the impeller efficiency by an average of 2% to 5%. For example, three kinds of high-flow three-dimensional flow impellers for natural gas pipeline centrifugal compressors developed in the United States have an impeller efficiency of 94% to 95%. The efficiency of single-shaft multistage centrifugal compressors in Japan has also been further improved. The adiabatic efficiency of the large-flow half-opening ternary impeller is 94%. The adjustment method should be more driven by industrial turbines or gas turbines, and the goal of energy saving can be achieved by changing the speed.
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
Turbine Hard High Speed Door, high speed spiral doors, aluminum high speed turbine door, Aluminum Rapid Door, Aluminum Fast Door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com