Product Introduction for magnetic drum separator
Series CTB wet drum permanent magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.
Working principle of magnetic drum separatorWhen the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
The drum can be equipped with three kinds of tanks. That is downstream tank (Series CTS), upstream tank (Series CTN) and half upstream tank (Series CTB).
The downstream tank (Series CTS) is applicable to rougher flotation and concentration of ore with size: 0~10mm.
The upstream tank (Series CTN) is applicable to rougher flotation and concentration of ore with size: 0~0.6mm and the recovery of heavy-medium in coal preparation industry.Â
The half upstream tank (Series CTB) is applicable to rougher flotation and concentration of ore with size: 0~1mm.
Application for magnetic drum separator
Magnetic separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. 
The features for magnetic drum separator
1. The strength of magnetic field is large in the surface of tube;
2. Large wrap angle of magnetic system;
3. The strength of magnetic field is stability;
4. The transmission system is stable and reliable;
Components for magnetic drum separator
1. magnetic drum   2. tank body     3. support    4. feed box    Â
5. discharge box (ore concentrate box)  6. drive motor    7. motor reducer  8. control box, etc.
The magnetic drum is made of stainless steel (thickness: 3 mm) and covered with wear resistant rubber.
specification
| Model | Drum size(dia*l) mm |
capacity (t/d) |
capacity (m3/d) |
motor power (kw) |
Rotating speed (r/min) |
Total weight (kg) |
| CTG-7522 | 750*2200 | 4000 | 2500 | 3 | 40 | 1300 |
| CTG-7526 | 750*2600 | 4000 | 3000 | 4 | 35 | 1500 |
| CTG-9022 | 900*2200 | 4000 | 3000 | 4 | 38 | 1600 |
| CTG-9026 | 900*2600 | 4000 | 3500 | 5.5 | 28 | 1900 |
| CTG-1024 | 1050*2400 | 4000 | 3500 | 7.5 | 28 | 2200 |
| CTG-1030 | 1050*3000 | 4000 | 4000 | 11 | 22 | 2600 |
| CTG-1230 | 1200*3000 | 4000 | 4200 | 11 | 22 | 3000 |
| CTG-1240 | 1200*4000 | 4000 | 5000 | 15 | 22 | 3800 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact Information
Product Introduction for magnetic drum separator
Series CTB wet drum permanent magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.
Working principle of magnetic drum separatorWhen the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
The drum can be equipped with three kinds of tanks. That is downstream tank (Series CTS), upstream tank (Series CTN) and half upstream tank (Series CTB).
The downstream tank (Series CTS) is applicable to rougher flotation and concentration of ore with size: 0~10mm.
The upstream tank (Series CTN) is applicable to rougher flotation and concentration of ore with size: 0~0.6mm and the recovery of heavy-medium in coal preparation industry.Â
The half upstream tank (Series CTB) is applicable to rougher flotation and concentration of ore with size: 0~1mm.
Application for magnetic drum separator
Magnetic separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. The features for magnetic drum separator
1. The strength of magnetic field is large in the surface of tube;
2. Large wrap angle of magnetic system;
3. The strength of magnetic field is stability;
4. The transmission system is stable and reliable;
Components for magnetic drum separator
1. magnetic drum   2. tank body     3. support    4. feed box    Â
5. discharge box (ore concentrate box)  6. drive motor    7. motor reducer  8. control box, etc.
The magnetic drum is made of stainless steel (thickness: 3 mm) and covered with wear resistant rubber.
specification
| Model | Drum size(dia*l) mm |
capacity (t/d) |
capacity (m3/d) |
motor power (kw) |
Rotating speed (r/min) |
Total weight (kg) |
| CTG-7522 | 750*2200 | 4000 | 2500 | 3 | 40 | 1300 |
| CTG-7526 | 750*2600 | 4000 | 3000 | 4 | 35 | 1500 |
| CTG-9022 | 900*2200 | 4000 | 3000 | 4 | 38 | 1600 |
| CTG-9026 | 900*2600 | 4000 | 3500 | 5.5 | 28 | 1900 |
| CTG-1024 | 1050*2400 | 4000 | 3500 | 7.5 | 28 | 2200 |
| CTG-1030 | 1050*3000 | 4000 | 4000 | 11 | 22 | 2600 |
| CTG-1230 | 1200*3000 | 4000 | 4200 | 11 | 22 | 3000 |
| CTG-1240 | 1200*4000 | 4000 | 5000 | 15 | 22 | 3800 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact Information
According to the number of screws, it can be divided into single-screw, twin-screw, triple-screw, and multi-screw. Twin-screw can be divided into parallel twin-screw and conical twin-screw. The most significant difference between parallel and conical twin-screw extruders is the screw machine. The geometry of the cylinder is different, which leads to many differences in structure and performance. Although the characteristics of the two are different, they have their own advantages.
Parallel Twin Screw Barrel,Extruder Screw Barrel,Plastic Extrusion Screw,Injection Molding Screws And Barrels
Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com