As people increasingly enjoy the convenience and quickness brought about by the material, travel to major scenic spots is no longer the only way to choose to hike on foot. In contrast, more choices of electric sightseeing car to experience the mobile tour mode . Not only does it make you feel comfortable, but you can also enjoy more scenery in a tight sightseeing time. Therefore, for the scenic spot, the daily maintenance and maintenance of the electric sightseeing tourist vehicle must be done enough homework, so as to undertake the tourist sightseeing mission on weekdays and holidays.
First, the core component of the electric tour car is the battery for energy supply, so the maintenance of the battery should be placed in the first place. According to the principle of battery-powered performance, when driving, you should drive as evenly as possible, to avoid sudden changes in the speed of the current during rapid braking or rapid acceleration, thereby damaging the relevant physical characteristics of battery power. The battery is charged with the use of charge, grasp the specific charging time, to prevent the battery overcharge heat. According to the driving conditions of each electric tourist car, different charging frequencies are used. Periodically, according to the operation manual, relevant inspections shall be carried out on the storage battery to check for any leakage or leakage of electricity and instability of the power supply.
Second, due to the stable nature of the electric tour tourist vehicle requirements, for four or more rounds of electric sightseeing tour car tires should be done in a timely manner regular inspections. Formed the habit of detecting the tire pressure frequency of the tire. Avoid the phenomenon of unbalanced cars and excessive power consumption caused by uneven tire pressure.
Third, electric sightseeing car to facilitate the upper and lower tourists are mostly doorless design, the car will generally be equipped with safety rods, safety bolts, safety chains and other protective equipment. The safety of these safety devices should be checked regularly to check whether the safety devices are complete or not. Check for looseness and breakage. To avoid accidents when driving on some scenic complex roads.
The above three points are only general considerations for the power, stability, and safety of electric sightseeing vehicles . There are still many details that need to be paid attention to in actual use and maintenance. There is an opportunity to discuss with them later.
Round Open Water Cooling Tower
The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.
All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.
Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.
Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.
Special designed water sprinkler with big bore diameter,which won' t cause blocking but the sprinkling effect is very good. It is installed in the tower,so it won' t bee polluted by outside dust and foreign matters.
Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.
Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.
The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.
Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com