Oxygen valve profile: In physical chemistry experiments, often to use oxygen, nitrogen, hydrogen, argon and other gases. These gases are generally stored in a dedicated high-pressure gas cylinder. When using the pressure reducing valve to gas pressure drop to the required range of experiments, and then through the other control valve fine-tuning, the gas input system. The most commonly used pressure reducing valve for oxygen regulator, referred to as oxygen meter. How it works: The oxygen pressure relief valve is connected to the high pressure chamber and the cylinder, the low pressure chamber is the gas outlet and leads to the system. Indication of high pressure gauge is the pressure of gas stored in the cylinder. Low pressure gauge outlet pressure can be controlled by adjusting screw. Open the cylinder main switch when using, then turn the low pressure gauge pressure adjusting screw clockwise to compress the main spring and drive the diaphragm, spring pad and ejector to open the valve. Such imports of high-pressure gas from the high-pressure chamber after throttling decompression into the low-pressure chamber, and through the exit leading to the working system. Turn the adjustment screw to change the height of the valve opening to regulate the passage of high-pressure gas and achieve the desired pressure value. Relief valves are equipped with safety valve. It is to protect the pressure relief valve and make it safe to use the device, but also the valve failure signal device. If due to the valve pad, valve damage or for other reasons, resulting in the pressure on the outlet and rise above a certain allowable value, the safety valve will automatically open the exhaust. This article Keywords: valve
Higher than 1W/mK,Lithium Battery Electric Vehicle,Thermal Conductive Silicone Pad
Trumony Aluminum Limited , https://www.szaluminumsheets.com