Recently, JAC GK6 equipped with the Maasfu 4.8L engine produced by Jianghuai Navistar has been newly launched in Shenzhen. The new power system matches the excellent quality of the JAC Gehrfa series and combines with the deep products of JAC . As a result, Gehlfa K6 will surely become a star-studded new star in the 2015 mid-market.
Beautiful appearance, driving comfort and safety
JAC Gehl K6 Card is a brand-new product for high-efficiency logistics market. It pays more attention to the appearance, security, especially the power and other aspects. The new "U" front face design enables the mask and bumper to be integrated. The strong sense of hierarchy, the inverted trapezoidal horizontal grille, and the honeycomb grille mesh are concise and elegant, without losing the elegant style. "Hawk Eye" headlights, "cylindrical" fog lamps, simple side-turn lights and reflectors further enhance the safety of driving on the basis of aesthetic assurance.
JAC Gehl K6
In order to better ensure the driving safety of occupants. Exterior mirrors, front windows, etc. make full use of the principles of optics and automotive ergonomics. While satisfying the requirements of the latest vision, the vision is more open and the driving safety is higher. At the same time, the JAC Gehl K6 cab body is designed according to the latest European standards. High-strength steel materials are used in the crash zone of the cab and ribs are added in key areas to ensure that the driver’s safety is protected in all directions. The CAE analysis of the cab push-up fully guarantees the living and safety space of the driver and passengers. The new front lower protection design provides superior safety performance.
Maisford 4.8L engine provides core power support
Compared with the appearance and safety, JAC Gefa K6 is the most prominent is the upgrading of the power system, the first adopted JAC Navistar Masters 4.8L engine, with JAC Navistar advanced technology concept, the highest power Up to 140 horsepower, the maximum torque of 740N · m, is currently the largest displacement engine designed and produced by Jianghuai Navistar, with a very mature technical strength. The engine adopts a split four-valve independent cylinder head design, which is more convenient for maintenance; the application of a 1800-bar high-pressure common rail injection system and a high-efficiency waste-gas bypass turbocharger enables the engine to output higher torque at a low speed and is very large. Maintaining a high torque in the speed range enables the Jaguar K6 to perform even better in terms of drivability, climbing performance and overload capacity.
JAC Navistar Maasfu 4.8L engine
The Jianghuai Navistar Maasfu 4.8L engine adopts the design idea of ​​high-pressure common rail, supercharged intercooling and SCR, fully meets the national IV emission, and has the potential to upgrade the country V. Relying on advanced staged combustion chamber technology, it has greatly reduced the fuel consumption rate. It is understood that the new Kelfa K6 product has an economic speed of 70-80 kilometers per hour, and the fuel consumption is estimated to be 16L per 100 kilometers, which is only about 9 cents per kilometer, which is truly the lowest in the same category. And the excellent low noise control of this Maas Fu engine has also been widely praised by customers.
In the JAC Gehl K6, matching the Mai Sifu 4.8L engine is a JAC special gearbox, which can be combined to make each other even better. It can transmit all the engine power to the rear axle, achieve the lowest power transmission loss, and achieve the output and transmission efficiency. The highest level. In addition, the single-stage bridge with reliable performance is highly efficient, fuel-efficient, safe, reliable, and easy to maintain, and the driving safety is effectively guaranteed. The frame of the Kelfa K6 is a high-strength steel frame with a frame cross section of 245x75x7mm, which guarantees that the car has excellent load-bearing capacity. At the same time, the car is also equipped with an ABS anti-lock brake system, and the safety guarantee is again upgraded to one grade. At present, the Gefa K6 card has passed 450,000 kilometers of reliability test and its quality is trustworthy.
It is reported that Jianghuai Navistar Maasfu 4.8L engine will also be introduced 190-horsepower models, 7.2L engine type will also be put into mass production in 2016, is expected to provide more reliable power support for JAC heavy trucks.
Maisford Engine is jointly developed by JAC and Navistar, which is also a sign of Jianghuai becoming the second commercial vehicle company to establish a complete vertical supporting system after Futian Automobile. The quality is no doubt. At the same time, Jianghuai Gefa K series products are the main brands of Jianghuai Automobile in the medium- and heavy-duty truck market. After many years of hard work in the market, it has been widely recognized by the market. The Jianghuai Gefa K series products and Jianghuai Na For the first time, the Veystal engine is combined with the same source, and the perfect marriage of the two will give us an excellent product. Let us look forward to it.
Cuplock scaffolding welding machine is applied for cuplock scaffolding, it includes cuplock Scaffolding Automatic Welding Machine, cuplock scaffolding automatic cutting machine, Cuplock Scaffolding Automatic Punching Machine.
Cuplock Scaffolding Welding Machine
Cuplock Scaffolding Welding Machine,Cuplock Scaffolding Welding Equipment,Cuplock Welding Machine,Cross-Bar Welding Machine
RENQIU JINSHI WELDING MACHINE CO., LTD , http://www.scaffoldwelder.com