96 Cavities Preform Mould with Hot Runner

96 Cavities preform mould

Specifications
1. Material: 2316 Steel, P20
2. Cavity: Single/Multi
3. Runner: Hot/Cold
4. Type: Air seal/short tail/long tail
5. One million Grantue
1. The mould is desigened with 3D modeling software
2. The mould is made by imported P20 and German 2306 seteel etc.
3. The mould is designed by advanced hot Runner system and each cavity has independent temperature control and heater system.
4. The mould surface is plated by reliable hard chrome.
5. The mould cavity is replaceable, so that the label top can be changed.
6. All the parts are manufactured with CNC equipments.

PET Preform Mould Main Components Specification and Advantages
Main component
Specification and Advantages
Core
2316 steel from Sweden
High-quality special mould steel from Sweden (HRC >45) gurantee 2 million shots without any maintenance

Neck
S136 steel from Sweden, HRC >60,
International standard screw neck
Cavity
2316 steel from Sweden
Each cavity have an independent temperature controller
Each cavity self-clamp independently, ensure mould concentricity. 0.05-0.06mm
Body
P20 Steel material from Germany
Hotrunner plate
2344 Steel material from Germany
Slider Plate
Wear-resistant copper
Specially designed cooling circuits
Proper design reduce molding cycle time to 15 seconds( with proper water chiller and injection machine) about 3-5 shots per minute
Hot runner design
Make sure the high quality of preform products.
Heater
Anole Germany
Valve gated design with Automatic drop
Each cavity has its independent heating zone and temperature is measured by independent thermocouple...(advantages: Easily avoid some problems such as white or drawbench on bottom).
Valve gated type without tail reduces labor force.
Precessed by high presion CNC machine and numerical control loathe machine
Lowest weight and dimensional variation
Thickness between max. Part and min. Part is not more than 0.05mm make sure that every parts can match well

Mold Handling Line

Mold Handling Line,Full Auto Modeling Equipment Line,Full Auto Open Foundry Molding Line,Auto Modeling Equipment Line

Changzhou Qiaojie Casting Equipment Co., Ltd. , https://www.qiaojieequipment.com