2. 8 years experience
3. OEM supplier
4. ISO/TS16949
5. Non-asbestos
Brake Shoe
High precision aluminum alloy casted by 125T die-casting machine, with good inside quality, cutting section well-proportioned and exquisite, with high anti-pressure ability, guarantee from brake slip and rupture. The alloy part surface was anti-wearing, antisepticise and sand sprayed. The pad was made of special anti-attrition material, the surface and anti-attrition rate are both above national standard, thus assure the brake shoes assembly high anti-attrition ability and durability, the stick and the cutting level of the alloy part and pad are also above national standard.
Advantages:
1. Stable friction material for motorcycle, ATV brake shoes.
2. Excellent friction property, lower wear rate and high rotary burst strength in high temperature with good durability.
3. Standard size, proper hardness and strength
4. A complete rang of specifications and a great variety of models.
5. We are factory, one-stop serve, make sure you buy the best quality products in the most affordable price.
Suitable: All motorcycle and ATV...
Model: Supplying all kinds of brake shoes
The Material of Brake Shoe-- Aluminum rack: ADC12 Aluminum Alloy
The aluminum rack of brake shoes are processed by 125 ton high pressure casting machine, which will ensure the aluminum rack is hard and high density without any air bubble inside.
The Material of Brake Shoe Brake lining: Asbestos, non-asbestos, soft leather
The special formulations of this brake shoes friction material make it Low noise, good thermal recession and recovery, good performance of water recession.
Zinc or Nickel Plating Production Line
Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.
Zinc-nickel alloy is an anti-corrosion coating with excellent corrosion resistance. At the same time, it has good mechanical properties and does not change the mechanical properties of the steel after plating. It has excellent brazing properties and is easy to weld under various conditions. The internal stress of the coating is small, which is comparable to that of the cadmium coating in the torsion-tension test. The plating solution has good dispersing ability and covering ability, high current efficiency, bright and smooth coating.
The zinc-nickel alloy plating bath has weak acid chloride type, sulfate type and alkaline zinc acid type.
The surface condition and processing requirements during electroplating, select the appropriate steps, and perform the necessary finishing processing on the surface of the part, so that the part has a smooth and clean surface, which is an important link in obtaining a high-quality coating.
Zinc Or Nickel Plating Production Line,Zinc Plating Line,Zinc Plating Production Line,Nickel Treatment Production Line
Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com