Chrome Ore Separator Shaking Table

CHROME ORE SEPARATION EUIPMENT INCLUDING SPIRAL CHUTE, SHAKING TABLE ETC...

Gravity Separation 6-S Shaking Table
 
which is also called table concentrator, is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
 
Put the raw materials into the feeding launder, and put some water in to make it into slurry of concentration of 20% to 25%, and gravity flow to the deck. The particle group become loose and layered because of the rinsing of water and shaking of the deck in the bed ditch. After the layered, the upper particle and the bottom particle move in different direction because of the different pressure of flowing water and the friction of the bed surface. The upper light particle moves downward along the transverse of bed surface result of the stronger flowing water., this side called tailing side. The heavy mineral particles which located in the bottom of bed layer was influenced by differential movement of bed surface, thus them move to the opposite of the drive end, and we call this point concentrate side. Because of the different density, granularity, and the directions of movement, the groups of mineral particles spread in Fan-shaped along the diagonal of the feeding launder. The production discharge along the edge of bed surface, the discharge line is so long, so that shaking table could produce many kinds of different quality product precisely.
 
Separating precisely is the prominent advantage of shaking table. We can get some final concentrate, final tailings and 1 or 2 kinds of middling product after the first separating from raw mineral. The enrichment ratio of concentrate is very good, when dealing with low grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times. Besides, the range of separating particle size effectively in dealing with metallic ore is 2 to 0.02 mm.
 
Features
 
 
High recovery ratio
High concentration ratio
Easy installation
Simple operation
Deck constructed of fiber glass
Seven different decks to   choose
Long working life
Adjustable stroke length and speed
Construction and mechanical features
 
Head Motion   Gandong shaking tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
 
Decks   The decks are constructed of steel framework and covered 16mm fiberglass with emery, this cover its strength reaches as high as 70% of steel, the features of this design are stronger, wear-resistant,
corrosion-resistant, and no distortion, it lengthens the working-life of machine and thus allows machine perform perfectly on different mineral and different weather condition.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
 
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
 
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
 
  


We can make a special mineral processing approach for you with least cost & simplest way. We also provide all small/lab testing mining equipment, welcome to contact me for the details. Please do not hesitate to contact for possible business co-operation.
Now our products have been exported to over 57 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, SouthAfrica, Zimbabwe, Sudan, Ghana, Congo, Morocco, India, Indonesia, Malaysia, Philippines, NorthKorea, Mongolia, Vietnam, Thailand etc.
 
Our faith: Customer is the god.
Our goal is to provide customers with one-stop service in the field of mining, including the minerals in the mineral analysis, mineral processing test, engineering design, equipment production, equipment installation, equipment debugging and of technical training etc integrated services, through the provision of our perfect services to solve all customer's problem from his investment to his return.
 Q: What Information should customers give to us?

 If rock ore, max feeding size? Capacity?
2) If alluvial/placer ore,contain sticky clay ore? If yes, more than 30% or not? and -5mm materials percentage? Capacity?    Mineral elements and content?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?A: Yes, we have a laboratory equipped with complete mining equipment which including jaw crusher, hammer mill, ball mill, jig, gold centrifugal concentrator, spiral chute, slurry pump, mixing tank, shaking table, dry magnetic separator, wet magnetic separator, three disc magnetic separator, electric separator etc. So we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.Q: How long is the guarantee of your equipments? Does your company supply the spare parts?A: The warranty period of is one year, if break during this guarantee period, we need to replace new one for you AT NO COST. And of course we will supply the spare parts for you for life-long time at lowest cost.Q: If i need the complete mineral processing line. Can you help us build it?A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experienced engineers team of us, these 12 engineers always fly out of China to install, debugging our equipments on site and trainning the buyer's staff. --- PRE-SALE SERVICE ---1.Based on clients' request and budget, our experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to us for testing by courier, or, the customer take the sample to our factory for testing;it's free
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.--- AFTER-SALE SERVICE ---1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term--- ONE STOP SOLUTION ---1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.Why Choose Us?-Quality: Guarantee
-Delivery: On Time
-Communication: In Time
-After-Sales Service: Excellent
-Engineer Team: Professional & more than 20 years experience on site
-Price: Competitive
 
 
Welcome you visit our factory when you are free, I will arrange our driver to pick you up from Airport for free and book hotel for you in advance.
Well-Tech International Mining Equipment
We have 7 big workshops, and one professional full equipped mineral testing laboratory. Our laboratory has jaw crusher, hammer crusher, ball mill, spiral chute, jig, gold centrifugal concentrator, shaking table, slurry pump, mixing tank, wet/dry magnetic separator, electric separator etc. Our equipments have been exported to more than 58 countries up to now. 

 
Mob: +86-18296775735
 
 
 
  CHROME ORE SEPARATION EUIPMENT INCLUDING SPIRAL CHUTE, SHAKING TABLE ETC...

Gravity Separation 6-S Shaking Table
 
which is also called table concentrator, is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
 
Put the raw materials into the feeding launder, and put some water in to make it into slurry of concentration of 20% to 25%, and gravity flow to the deck. The particle group become loose and layered because of the rinsing of water and shaking of the deck in the bed ditch. After the layered, the upper particle and the bottom particle move in different direction because of the different pressure of flowing water and the friction of the bed surface. The upper light particle moves downward along the transverse of bed surface result of the stronger flowing water., this side called tailing side. The heavy mineral particles which located in the bottom of bed layer was influenced by differential movement of bed surface, thus them move to the opposite of the drive end, and we call this point concentrate side. Because of the different density, granularity, and the directions of movement, the groups of mineral particles spread in Fan-shaped along the diagonal of the feeding launder. The production discharge along the edge of bed surface, the discharge line is so long, so that shaking table could produce many kinds of different quality product precisely.
 
Separating precisely is the prominent advantage of shaking table. We can get some final concentrate, final tailings and 1 or 2 kinds of middling product after the first separating from raw mineral. The enrichment ratio of concentrate is very good, when dealing with low grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times. Besides, the range of separating particle size effectively in dealing with metallic ore is 2 to 0.02 mm.
 
Features
 
 
High recovery ratio
High concentration ratio
Easy installation
Simple operation
Deck constructed of fiber glass
Seven different decks to   choose
Long working life
Adjustable stroke length and speed
Construction and mechanical features
 
Head Motion   Gandong shaking tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
 
Decks   The decks are constructed of steel framework and covered 16mm fiberglass with emery, this cover its strength reaches as high as 70% of steel, the features of this design are stronger, wear-resistant,
corrosion-resistant, and no distortion, it lengthens the working-life of machine and thus allows machine perform perfectly on different mineral and different weather condition.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
 
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
 
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
 
  


We can make a special mineral processing approach for you with least cost & simplest way. We also provide all small/lab testing mining equipment, welcome to contact me for the details. Please do not hesitate to contact for possible business co-operation.
Now our products have been exported to over 57 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, SouthAfrica, Zimbabwe, Sudan, Ghana, Congo, Morocco, India, Indonesia, Malaysia, Philippines, NorthKorea, Mongolia, Vietnam, Thailand etc.
 
Our faith: Customer is the god.
Our goal is to provide customers with one-stop service in the field of mining, including the minerals in the mineral analysis, mineral processing test, engineering design, equipment production, equipment installation, equipment debugging and of technical training etc integrated services, through the provision of our perfect services to solve all customer's problem from his investment to his return.
 Q: What Information should customers give to us?

 If rock ore, max feeding size? Capacity?
2) If alluvial/placer ore,contain sticky clay ore? If yes, more than 30% or not? and -5mm materials percentage? Capacity?    Mineral elements and content?

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?A: Yes, we have a laboratory equipped with complete mining equipment which including jaw crusher, hammer mill, ball mill, jig, gold centrifugal concentrator, spiral chute, slurry pump, mixing tank, shaking table, dry magnetic separator, wet magnetic separator, three disc magnetic separator, electric separator etc. So we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.Q: How long is the guarantee of your equipments? Does your company supply the spare parts?A: The warranty period of is one year, if break during this guarantee period, we need to replace new one for you AT NO COST. And of course we will supply the spare parts for you for life-long time at lowest cost.Q: If i need the complete mineral processing line. Can you help us build it?A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experienced engineers team of us, these 12 engineers always fly out of China to install, debugging our equipments on site and trainning the buyer's staff. --- PRE-SALE SERVICE ---1.Based on clients' request and budget, our experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to us for testing by courier, or, the customer take the sample to our factory for testing;it's free
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.--- AFTER-SALE SERVICE ---1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term--- ONE STOP SOLUTION ---1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.Why Choose Us?-Quality: Guarantee
-Delivery: On Time
-Communication: In Time
-After-Sales Service: Excellent
-Engineer Team: Professional & more than 20 years experience on site
-Price: Competitive
 
 
Welcome you visit our factory when you are free, I will arrange our driver to pick you up from Airport for free and book hotel for you in advance.
Well-Tech International Mining Equipment
We have 7 big workshops, and one professional full equipped mineral testing laboratory. Our laboratory has jaw crusher, hammer crusher, ball mill, spiral chute, jig, gold centrifugal concentrator, shaking table, slurry pump, mixing tank, wet/dry magnetic separator, electric separator etc. Our equipments have been exported to more than 58 countries up to now. 

 
Mob: +86-18296775735
 
 
 
 

Commercial Fan

B&B EC CO., Ltd. , https://www.hi-cfm.com