Decoration tips

First, diligence and ventilation, to prevent pollution caused by the decoration In order to avoid damage during summer decoration pollution "high-incidence period", in addition to the use of non-toxic and less toxic decorative materials, please go to the formal home improvement company construction, but also to do the renovation of the room Ventilation and air purification. When conditions permit, the room should be ventilated as much as possible; if there is no condition, indoor ventilation devices and air purification devices that can reduce indoor harmful gases can be used.

Second, do not consider the radiator in summer

Although you will not use heating in the hot summer, you will feel the importance of heating in your future residence. And home renovation projects are "non-repeatable", so whenever you do renovations, you have to take into account the replacement of heating. In the home renovation, it has become popular to replace the traditional cast iron radiators with new ones with good heating effect and beautiful appearance.

Third, do not rush to repair

In spring, the air humidity is high. Walls, floors, and wood furniture contain more water. In the summer, the air gradually becomes dry. At this time, problems may occur due to seasonal changes, such as the change of temperature and humidity, such as the shrinkage of the wooden floor, the increase in the gap between the board and the board, and the different materials of the wall and the door frame. Shrinkage is different, there are gaps; cracks on the walls ... These are all normal phenomena that occur during the season transition. At this time, the moisture will continue to evaporate, and the wall may continue to crack. It is better to wait until the moisture on the wall is suitable for the external climate and then make another repair.

Fourth, the rain does not paint

For wood products, whether it is a varnish or a mixture of oils, remember not to brush on a rainy day. In the rainy weather, the construction team was asked to do some other work, or even suspend work for two days.

Fifth, remove musty

Home renovation often encounter latex paint because of slow drying, mildew in hot and humid weather will become a problem. In this regard, the general approach of the decoration company is to open the air-conditioning dehumidifiers to pump away the moisture in the air; the furniture cabinet door is not closed and kept ventilated. After the renovation, you will also encounter various problems that cannot spread out and affect people's health. The decoration company's proposal is to put more green plants after the renovation, or put two or three lemons, oranges, and bananas in the room, and you can receive a quick deodorizing effect.

Six, wallpaper, paint should be naturally dry

Paints and wallpapers are commonly used decorative wall materials. In the spring, because of the dampness of the air, the windows and doors are opened for ventilation and ventilation in order to allow the walls to dry as quickly as possible. Summer is different, because of the dryness, so the wallpaper is usually soaked in water before paving, and then brushing paste. If you open the doors and windows at this time, let wallpapers that have just been pasted be “drenched” and the wallpaper will shrink due to rapid loss of water.

Seven, moisture, anti-exposure

The purchase of wood products in the summer includes the construction of large core boards for the main materials, white materials for the auxiliary materials, door edge lines, window frame lines, and skirting boards along the walls, all of which require the detection of the moisture content of wood products. In the building materials market, general wood products franchise stores should have wood moisture measuring instruments. According to the national regulations, the moisture content of standard plates cannot exceed 12%. Experts suggest that when purchasing materials in the rainy season, they may choose to dry them more appropriately. When the materials are introduced into the market, they should be left for a day or two so that it is the same as the surrounding humidity.

Mechanical Parts

Mechanical Parts,Hardware Processing,Mold Guiding Rod Set,Mold Guiding Rod Set Making

Guangdong Rixin Precision Technology Co., Ltd. , https://www.nissontooling.com