A few days ago, Dagang Zhongcheng Machinery Manufacturing Co., Ltd. manufactured and installed 1000 cubic meters of displacement and 2000 meters of lift. The first electric pump unit with the largest displacement and the highest lift in China was successfully put into operation in the NP1-P4 well of Qiandongnanpu Oilfield. This marks the leading level of submersible electric pump manufacturing in Dagang Zhongcheng Machinery Manufacturing Co., Ltd.
The NP1-P4 well in the Qiandongnanpu oilfield is an oriented horizontal well. The well is the longest well in the domestic level after the NP1-P1 well and the NP1-P2 well. According to the NP1-P4 well data, Jidong Oilfield decided to adjust the submersible pump type from 800 cubic meters to 1,500 meters to 1000 cubic meters and 2000 meters, and required Dagang Zhongcheng Machinery Manufacturing Co. to complete the submersible pump within 15 days. The unit is equipped and tested, and the relevant ground equipment is equipped.
After receiving this urgent task, Dagang Zhongcheng Machinery Manufacturing Co., Ltd. designed the unit supporting plan in the shortest time. In order to achieve high quality of the unit, the company organized technical seminars for many times, and technicians were on site to guide and ensure the smooth implementation of the design.
On April 15, the electric pump unit was successfully delivered to the well site of Jidong Oilfield. In order to ensure the success of the downhole, the on-site service personnel of Dagang Zhongcheng Company will accurately enter the motor, protector, separator and centrifugal pump into the well according to the process requirements. After 10 hours of continuous fighting, the NP1-P4 well test was successfully put into production.
The NP1-P4 well in the Qiandongnanpu oilfield is an oriented horizontal well. The well is the longest well in the domestic level after the NP1-P1 well and the NP1-P2 well. According to the NP1-P4 well data, Jidong Oilfield decided to adjust the submersible pump type from 800 cubic meters to 1,500 meters to 1000 cubic meters and 2000 meters, and required Dagang Zhongcheng Machinery Manufacturing Co. to complete the submersible pump within 15 days. The unit is equipped and tested, and the relevant ground equipment is equipped.
After receiving this urgent task, Dagang Zhongcheng Machinery Manufacturing Co., Ltd. designed the unit supporting plan in the shortest time. In order to achieve high quality of the unit, the company organized technical seminars for many times, and technicians were on site to guide and ensure the smooth implementation of the design.
On April 15, the electric pump unit was successfully delivered to the well site of Jidong Oilfield. In order to ensure the success of the downhole, the on-site service personnel of Dagang Zhongcheng Company will accurately enter the motor, protector, separator and centrifugal pump into the well according to the process requirements. After 10 hours of continuous fighting, the NP1-P4 well test was successfully put into production.
The basic requirements of injection molding are plasticization, injection and molding. Plasticizing is the prerequisite to achieve and ensure the quality of molding products, and in order to meet the requirements of molding, injection must ensure enough pressure and speed. At the same time, due to the high injection pressure, the corresponding high pressure in the mold cavity, so there must be a large enough clamping force. It can be seen that the injection device and the combination mold device are the key parts of the injection molding machine.
Pulverizer Machine,Pulveriser Machine,Plastic Pulverizer Machine,Industrial Pulverizer Machine
Ningbo Haijing Plastic Machine Manufacturing Co. LTD , https://www.chinahaijing.com