Introduction of Vertical Turbine Pump
Vertical single stage or multistage pump with mixed or axial flow impeller design, broad hydraulic coverage provides best selection to meet specific operating conditions. Fabricated or cast iron, surface or underground discharge head, shaft and bearing combinations promote long life with options of open or enclose line shaft construction. It can be driven by VHS NEMA Standard motor, VSS motor or diesel engine through right angle gear box.
Application of Vertical Turbine Pump
| Municipal | Waster Plants | Commercial/Industrial |
| Golf Courses/Turf Irrigation | Agricultural Irrigation | Dewatering |
| Mining | Cooling Tower | Water Parks |
| Snowing | Flood Control | River/Sea Water Circulation |
| Fire-Fighting | etc | Â |
Material of Vertical Turbine Pump
Bowl: Cast iron, Stainless steel
Shaft: Stainless steel
Impeller: Cast iron, Bronze or Stainless steel
Discharge head: Cast iron or carbon steel
Basic Parameters
| Type | Capacity | Head | Stage | String Quantity | Rotating Speed | Motor Power | Effi | Dia | ||
| m³/h | m | i | mm | r/min | kw | % | mm | |||
| 100LJC10-4 |
6.5 10 12 Â |
44 | 40 | 32 | 10 | 8 | 2940 | 5.5 | 62 | 92 |
| 52.5 | 44 | 35 | 11 | 5.5 | ||||||
| 53 | 48 | 38 | 12 | 5.5 | ||||||
| 58 | 52 | 41.5 | 13 | 5.5 | ||||||
| 61.5 | 56 | 44.5 | 14 | 5.5 | ||||||
| 66 | 60 | 48 | 15 | 5.5 | ||||||
| 70 | 64 | 51 | 16 | 5.5 | ||||||
| 74.5 | 68 | 54 | 17 | 5.5 | ||||||
| 79 | 72 | 57.5 | 18 | 5.5 | ||||||
| 83.5 | 76 | 60.5 | 19 | 5.5 | ||||||
| 88 | 80 | 64 | 20 | 5.5 | ||||||
| 92 | 84 | 67 | 21 | 5.5 | ||||||
| 96.5 | 88 | 70 | 22 | 5.5 | ||||||
| 102 | 92 | 73.5 | 23 | 5.5 | ||||||
| 105.5 | 96 | 76.5 | 24 | 5.5 | ||||||
| 110 | 100 | 80 | 25 | 5.5 | ||||||
| 115 | 104 | 83 | 26 | 5.5 | ||||||
| 150LJC10-9 |
8 10 16 |
56 | 54 | 40 | 6 | 12 | 2940 | 5.5 | 62 | 138 |
| 65 | 63 | 47 | 7 | 5.5 | ||||||
| 74.5 | 72 | 54 | 8 | 5.5 | ||||||
| 84 | 80 | 61 | 9 | 5.5 | ||||||
| 93 | 89 | 67.5 | 10 | 5.5 | ||||||
| 102.5 | 98 | 61.5 | 11 | 7.5 | ||||||
| 112 | 108 | 81 | 12 | 7.5 | ||||||
| 121 | 117 | 87.5 | 13 | 7.5 | ||||||
| 130 | 126 | 94.5 | 14 | 7.5 | ||||||
| 139.5 | 135 | 101 | 15 | 11 | ||||||
| 149 | 144 | 108 | 16 | 11 | ||||||
| 150LJC20-11 | 15 20 24 |
48 | 44 | 39.4 | 4 | 12 | 2940 | 5.5 | 67 | 150 |
| 60 | 55 | 49.3 | 5 | 5.5 | ||||||
| 72 | 66 | 59 | 6 | 7.5 | ||||||
| 84 | 77 | 69 | 7 | 7.5 | ||||||
| 96 | 88 | 78.7 | 8 | 11 | ||||||
| 108 | 99 | 88.6 | 9 | 11 | ||||||
| 120 | 110 | 98.4 | 10 | 11 | ||||||
| 132 | 121 | 108.2 | 11 | 15 | ||||||
| 144 | 132 | 118 |
Gas-Phase Ultrasonic Cleaning Machine The principle of gas-phase cleaning machine is as follow. When the solvent is heated, the steam forms the gas phase zone. In this area, the oil on the surface of the workpiece is dissolved and washed by steam. When the steam condenses, the dirt along with the grease falls back into the tank to become the cleaning fluid. Then, the cleaning fluid is heated and gasified into steam to clean the workpiece. This continuous cycle ensures the workpiece is always surrounded by the steam of cleaning fluid which overcomes the problem of contaminated cleaning fluid in the past common cleaning process. Heat Exchanger Cleaning Agent/Metal Decreasing Agent
Trichloro ethylene, tetrachloro ethylene, dichloromethane, isopropyl alcohol have very good cleaning effect with high stability, long usage period when they are used as metal cleaning agent. In Heat Exchanger factories, these degreasing agents are widely applied in cleaning fins, bars, parting plates, tanks and other Heat Exchanger Parts . After these heat exchanger parts with oil stain are soaked in the cleaning agent and cleaned by supersonic, they`ll be very clean which also ensure heat exchanger with good brazing quality. Heat Exchanger Cleaning,Heat Exchanger Tube Cleaning,Ultrasonic Automatic Cleaning Machine,Cleaning Of Tube Heat Exchangers Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com | |||||||