Packaging Details: Nude packing or Wooden box
Delivery Detail: within 30-90 days upon receipt of deposit
Product Orientation
1.Focus on large/medium size castings ,as well as small size ones.
2.Gray iron/Ductile iron casting with Resin-Bonded sand casting process.
Our Services
Â
Transaction ProcessÂ
1.Sample or Drawing by customer
2.Tooling proposal&Discussion
3.3D Tooling Design
4.Tooling production
5.Rough parts manufacturer
6.CNC Machining
7.Fitting&Finish
8.Tooling Measurement&Check
9.Assembly
10.Trial Production
11.Correction
12.Final Trial
13.Samples Inspection
14.Sample Approval by customer
15.Tooling Approval
Â
 Standard |
 ISO9001, GB, BV  |
|
  Material |
 Gray iron 200, 250, 300, 350, 400  Ductile iron 400, 500, 700  |
 Size&Design |
 As per client's drawings and requirements  |
 Weight range |
 The maximum single piece weights 80 MT  |
|
   Maching |
 CNC Milling machine, Machine center, Vertical lathe,  Digital floor boring and milling machine, Drill machine,  etc. |
|
   Testing |
 Direct-reading analyzer/German SPECTRO,  Automatic digital carbon &sulfur analyzer,  Low-temperature impact testing machine,  60MT Hydraulic universal testing machine, etc.  |
Surface treatment |
 Heat treatment, planing, polishing, painting, etc.  |
  Packing |
 As client's requirements   cast iron, gray iron casting, ductile iron casting, high quality and precise cast iron for machine tools, large and medium-sizedcasting products directly from our's factory |
Flask is the important technology equipment for automatic or semi-automatic moulding line. Machining by advanced CNC machine to ensure high precision and good interchangeability, dimensional inspect with CMM. Material of ductile iron, gray iron of high grade and welded-steel can be availabled, flask have high rigidity and can bear high pressure impact. We can design and manufacture different size of flasks for your requirement, also we manufacture of flask and pallet car according to drawings and technical specification of customer.
Company profile
Weifang Kailong Machinery Co., Ltd. is a science and technology enterprises, located in Weifang City Fangzi economic development zone, close to Weizhou Road, convenient transportation. Kailong Machinery is engaged in foundry machinery manufacturing professional supplier,design and manufacture of the following main products: flask and pallet car for moulding line, automatic static pressure molding line,Â
automatic, semi-automatic series of flask molding line, automatic slip flasks horizontal moulding line, semi-automatic pouring machine and the auxiliary machine of moulding line, mechanized moulding line,mechanized moulding line, BLT, JYB series of scale conveyor and various non-standard plate conveyor.
Through professional product and layout designing, we provide tailor-made solutions to customer. Based on advanced facility,better processing technology, strict processing control and quality inspection, we always believe in the conception of quality first and customer's satisfaction.
The company has always uphold the core values of "creating value for customer", and adhere to the principle of honesty and mutual benefit to get a win-win situation.With continuous innovation, we are committed to supplying our perfect products and best service to customers.Â
Mode of transport
FAQ:
1. Are you a manufacturer or a trading company?
We are engaged in casting machinery manufacturing professional supplier
2. How can I get some samples?Â
If you need, we are glad to offer you samples for free, but the new clients are expected to pay the courier cost, and the charge will be deducted from the payment for formal order.
Â
3. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or 3D cad model. If the 3D cad model can be supplied, the development of the tooling can be more efficient. But without 3D, based on 2D drawing we can still make the samples properly approved.
Â
4. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings for tooling making.
Â
5. What's your quality control device in house?
We have spectrometer in house to monitor the chemical property, tensile test machine to control the mechanical property and UT Sonic as NDT checking method to control the casting detect under the surface of casting.
Â
Zinc Alternator Cover
For the most part, alternators are relatively small and lightweight. Roughly the size of a coconut, the alternators found in most passenger cars and light trucks are constructed using an aluminum outer housing, as the lightweight metal does not magnetize. This is important since aluminum dissipates the tremendous heat generated by producing the electrical power and since the rotor assembly produces a magnetic field.
If you closely inspect an alternator, you'll find it has vents on both the front and back side. Again, this aids in heat dissipation. A drive pulley is attached to the rotor shaft on the front of the alternator. When the engine is running, the crankshaft turns the drive belt, which in turn spins the pulley on the rotor shaft. In essence, the alternator transfers the mechanical energy from the engine into electrical power for the car's accessories.
On the back side of the alternator you'll find several terminals (or connecting points in an electrical circuit ). Let's take a look at those:
S terminal -Senses battery voltage
IG terminal -Ignition switch that turns the voltage regulator on
L terminal -Closes the circuit to the warning lamp
B terminal -Main alternator output terminal (connected to the battery)
F terminal -Full-field bypass for regulator
Cooling is essential to an alternator's efficiency. It's easy to spot an older unit by the external fan blades found on the rotor shaft behind the pulley. Modern alternators have cooling fans inside the aluminum housing. These fans operate the same way, using mechanical power from the spinning rotor shaft.
As we start to disassemble the alternator, we find the diode rectifier (or rectifier bridge) , the voltage regulator , slip rings and brushes . The regulator distributes the power the alternator creates, and it controls the output of power to the battery. The rectifier bridge converts the power, as we'll learn in the next section, while the brushes and slip rings help conduct current to the rotor field winding , or wire field. Now let's crack the coconut open.
Opening the alternator reveals a large cylinder with triangular finger poles around the circumference. This is the rotor. A basic alternator is made up of a series of alternating finger pole pieces placed around coil wires called field windings that wrap around an iron core on the rotor shaft. Since we know the pulley attaches to the shaft, we can now visualize how the rotor spins inside the stator. The rotor assembly fits inside the stator with enough room or tolerance between the two, so the rotor can spin at high speeds without striking the stator wall. On each end of the shaft sits a brush and a slip ring.
As we touched on briefly, alternators generate power through magnetism. The triangular finger poles fixed around the circumference of the rotor are staggered, so the north and south poles alternate as they surround the wire rotor field windings. This alternating pattern creates the magnetic field that in turn induces voltage into the stator. Think of the stator as the catcher's glove as it harnesses all the power created by the spinning rotor.
All these components work together to give us the power we need to run our vehicles. Tesla captured this electrical energy and used it to light up cities, but we only need enough volts to power our stereo, lights, windows and locks . Let's take a look at how the alternator produces that power in the next section.
Auto Distributor,Zinc Alternator Cover,Aluminum Distributor Cover,Zinc Alternator Cover Mold
Ningbo Jinyao Machinery Company. LTD , https://www.cardiecastingmold.com