Horizontal Glass Washing and Drying Machine for Window&Door Glass

  • Model NO.: YW3B3K2500A
  • Certification: CE, SGS
  • Control System: PLC
  • Glass Edging Machine Type: Glass Double Straight Edging Machine
  • Condition: New
  • Min. Glass Size: 450*450mm
  • Glass Thickness: 3-19mm
  • Total Power: 38kw
  • Transport Package: Wrapping Film and Wooden Box Packaging
  • Origin: Hangzhou, China
  • Type: Glass Washing and Drying Machine
  • Structure: Horizontal
  • Glass Washing Machine Type: Horizontal Glass Washing Machine
  • Grinding Head Number: 4
  • Max. Glass Width: 2500mm
  • Table Height: 900-950mm
  • Drying Speed: 3-8m/M
  • Trademark: PUYU MACHINERY
  • Specification: 6750*4690*3520mm
Horizontal Glass Washing And Drying Machine For Window&Door Glass

Horizontal Glass Washing and Drying Machine for Window&Door Glass

1. Description
The horizontal glass washing machine for architecture glass is mainly used for washing and drying the surface of window glass, door glass, curtain-wall glass etc. And it is composed of feed-in part, three pairs of hair brush, back spray, three pairs of air knife and feed-out part.

2. Technical Parameter
Model YW3B3K1300A YW3B3K1600A YW3B3K2000A YW3B3K2500A
Max. Glass Width(mm) 1300 1600 2000 2500
Min. Glass Size(mm) 300×300 300×300 450×450 450×450
Table Height(mm) 900±50 900±50 900±50 900±50
Glass Thickness(mm) 3-19 3-19 3-19 3-19
Drying Speed(m/min) 3-8 3-8 3-8 3-8
Total Power(kw) 24 28 36 38
Floor Space(mm) 5720×2780×3520 5720×3080×3520 6750×4190×3520 6750×4690×3520
Weight(kg) 3500 4000 4800 5500

3. Main Patrs
Designation Brand
Brush Motor Made In China
Main Drive Gear Reducer Made In Taiwan
Main Bearing Made In China
Rubber Roller NBR Roller
Brush High Temperature Nylon Wire 0.08
Water Tank Stainless Steel
Shield Stainless Steel
Blower 18.5kw Made In China
Water Pump CNP


 

Series Steel Structure Industrial Cooling Tower

Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.

Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,

gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.


Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.

Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.

The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.

Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.

Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.

Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com