- Model NO.: Inconel X-750
- Type: Hexagon Head
- Head Style: Hexagonal
- Grade: Inconel X-750
- Finish: Polishing
- Nearest Port: Shanghai
- Customized Size: Acceptable Upon Request
- Processing Technology: Hot Forging
- Specification: M5-M100
- HS Code: 7318159090
- Material: Inconel X-750
- Connection: Common Bolt
- Standard: DIN, ANSI, GB, JIS, BSW, GOST
- Application: Machinery
- Size: M5-M100
- Means of Transportation: by Sea or by Air
- Delivery Date: 30days
- Trademark: TM
- Origin: China
InconelX-750 alloy are mainly γ '[Ni3 (Al, Ti, Nb)] aging phase strengthened nickel-base superalloy, below 980 ºC with good resistance to corrosion and oxidation resistance below 800 ºC has higher strength below 540 ºC has good resistance to relaxation properties, but also has good formability and weldability. The plane of the alloy is mainly used in the manufacture of aircraft engines, work in the following 800 ºC and require higher strength corrosion-resistant annular member, structural parts and bolts and other parts, in the following 540 ºC working with medium or low resistance to stress and relaxation of requirements springs and coil springs. It can also be used in the manufacture of gas turbine blades and other turbine parts. We can supply varieties of sheet, strip, bar, forgings, ring member,wire and tubing.
·Mark: TM
·Material: Inconel X-750
·Finish: Polishing
·Certificate: ISO9001:2008, SGS
·Packaging Detail: 20-25kgs per carton, 36-48 cartons per pallet or according to  customer's  requirement.
·Customer Service: 24-hours standby, Critical listening your every suggestion and feedback ASAP.
TOMORROW manufacturing capabilities allow us to make a wide variety of exotic alloy fasteners. Our special materials are Hastelloy C-276, Hastelloy C-22, Hastelloy B3, Incoloy 825, Incoloy 925, Incoloy 926, Incoloy 800HT, Inconel 600, Inconel 625, Inconel X-750, Inconel 725, Inconel 718, Monel 400, Monel404, Monel K500, Duplex 2205, Super Duplex UNS32750, Super Austentic 904L, Super Austentic F44, Titanium, Nimonic 80A, GH113, GH3039, GH2032, Precipitation-hardening 17-4PH, Super Austentic 20Cb-3, Super Austentic 6XN, Austentic 347H etc. Our hot forged fastener size range is from M5-M100.
Our goal today, as always, is to develop innovative high quality exotic alloy fasteners that are durable, save time and money.Â
Customer service is just as important to us as quality.Â
Our representatives will assist you in analyzing your requirements and selecting the system best suited to your needs. We inventory an extensive line of standard products and will economically produce special systems to meet your design requirements. We are people who deliver what we say, when we say.Â
TOMORROW...Dependability in design, engineering, manufacturing and service.
Welcome to contact us anytime you feel suitable.
Metal ring gasket is a solid metal gasket with octagonal or oval cross-section processed from metal materials, which has the function of radial self tightening sealing. Therefore, the metal ring gasket is contacted with the inner and outer sides (mainly the outer sides) of the flange trapezoidal groove by the backing plate and forms a seal by pressing. The octagonal ring gasket is matched with the flange groove, mainly in face contact. Compared with the oval ring gasket, although it is not easy to close with the flange groove, it can be used again, and because the section is composed of straight lines, it is easy to process. The oval ring gasket is in line contact with the flange groove and has good sealing performance, but the processing accuracy is required to be high, which increases the manufacturing cost. At the same time, the oval ring gasket cannot be reused.
Metal Ring Gasket,Metal Octagonal Ring Gasket,Octagonal Ring Joint Gasket,Flange 304 Octagonal Ring Gasket
Jiangsu Jinye Titanium Co., Ltd , https://www.metalhose-gasket.com