First of all, under the C1 driving license, it is not possible to directly drive to A2. The following conditions must be met:
1, age requirements 24 years old and 50 years old.
2. Must obtain medium-sized passenger car (B1) or large-scale goods vehicle (B2) driver's license for more than 3 years. There is no record of 12 points in nearly two scoring cycles.
3, or obtained the driving qualification for driving A1 large passenger cars for more than one year, and did not record 12 points in the last scoring period.
We can count the time, from the C1 driver's license to the A2, the fastest it will take 5 to 6 years. This is still a very smooth situation. If you accidentally deduct 12 points and delay it for 2 years, think about How hard is it?
1. Regardless of A1 and A2 driving licenses, as long as 1 to 11 points are deducted, the vehicle management station of the district receives 3 hours of safety education within 30 days after the end of this scoring cycle.
2. There is a score of 12 points in a scoring cycle directly down to the next level;
3. The death of a person caused by a traffic accident and the equal or higher liability will also be downgraded to a minimum of C1.
4. If you do not participate in the verification for three consecutive scoring periods, you must cancel the driving qualification of the highest quasi-driving type and notify the driver of the motor vehicle to go through the demotion and replacement business within 30 days. If you do not, follow the relevant regulations and place it at 200 yuan up to 500 yuan. Fine.
Here we must pay attention:
The so-called “cancellation of driving qualifications for the highest quasi-driver†is not the cancellation of a driver’s license but the cancellation of the highest quasi-driver type. For example, for A2 quasi-driving type drivers who fail to follow the law for 3 consecutive scoring periods, they should cancel their A2 quasi-drive type and degrade to B1 and B2 quasi-drive types rather than cancel the driver’s license. .
Do you want to open a trailer after reading it and plan to test your A2 driving license? Even if you are admitted to the exam, you can't say how long it will last!
Transmission Line Steel Tubular Tower
Our steel poles are made from quality sheet through bending,
forming, automatic welding and hot galvanization. We can reach one-run
machining length of 14m and can bend sheet of thickness up to 45mm. We
adopt advanced welding procedures, automatically weld main joints and
reach rank-II welding quality. We
have got 500kV Transmission Line Tubular Tower Quality Certificate from Power
Industry Steel Tower Qualified Inspection & Test Center from 2009
year.
Transmission Line Steel Tubular Tower, Transmission Line Tower, Steel Tubular Tower, Mono Steel Tower
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteeltower.com