——Interview with Mr. Yan Yongbin, President of China General Machinery Industry Association
At the "2008 Fourth China International Fluid Machinery Exhibition Media Association" sponsored by the China General Machinery Industry Association, the president of the China General Machinery Industry Association Yan Yongbin stated that although the global economy is affected by the subprime mortgage crisis in the United States, growth has slowed down. The international and domestic markets are not optimistic, but China's general machinery industry maintained a good momentum of development in 2008. This not only benefited from the strong support of the state for the equipment manufacturing industry since the 16th National Congress, but also benefited from the results of the common efforts of the general machinery industry organizations, enterprises and all employees during the 30 years of reform and opening up. Technological innovation is driving the industry. The key to development recalling the development of the general machinery industry over the past 30 years of reform and opening up, Zhai Yongbin believes that technological innovation is an important driving force for the development of the general machinery industry. According to the characteristics of technological development, the development of the general machinery industry can be divided into three phases. The first stage was the late 1970s to early 1990s. In the initial period of reform and opening up, the domestic boom in cooperation with foreign countries and the active introduction of relatively advanced foreign technologies and equipment directly promoted the development of the general machinery industry. However, in the early 1990s, foreign companies paid more attention to technology and developed it. Technical cooperation is very difficult. Many foreign companies are more willing to invest in factories in China and turn China into their manufacturing base. At this time, most of the domestic enterprises in the technology are still using foreign technology in the 1970s. The secondary innovation is not enough. The introduction of technology is hindered and independent development is difficult to achieve. From the 1990s to the beginning of the 21st century, the development speed of the general machinery industry Slowly, the competitiveness of enterprises has declined and it is difficult to participate in international competition. This is the second stage. In the third stage, the 16 major countries proposed to revitalize the Chinese equipment manufacturing industry, encourage the development of the machinery manufacturing industry, and promote the construction of an innovative society. Under the policy promotion and encouragement from the government, the general machinery industry has begun a new round of rapid development, through scientific and technological research, Digestion and absorption of imported technology and technological transformation, the general machinery industry's independent innovation capabilities and market competitiveness has improved significantly, forming a set of design, manufacturing, scientific research, teaching and technical services and other types of large-scale industrial system. The economic scale has developed rapidly at a rate of about 30% in the past five years. It has provided a large number of complete sets of equipment and major products for the development of the national economy, infrastructure construction, and national defense construction, and has the ability to undertake major national technical equipment tasks.
Macroeconomic environment
Demand higher requirements for the development of the industry
Zhai Yongbin stated that although China's general machinery industry has achieved extraordinary achievements and accumulated strong foundations during the 30 years of reform and opening up, the general machinery industry has also exposed some problems in the process of rapid development. For example, the industrial structural contradictions have not yet been fundamentally solved. The domestic general-purpose machinery basically remains on the low-end products, and the phenomenon of repeated manufacturing and repeated construction is serious. Second, the degree of industrial concentration is not high. There are more than 10,000 enterprises in the general machinery industry above the scale, but so far, there are still no large-scale enterprise groups that can lead the development of the industry. Third, the competition among enterprises is still at the level of price war. Some companies are willing to participate in competitive bidding at prices below the cost in order to occupy the market. This turbulent market competition pattern has caused China's general machinery industry to go through 30 years. Development, but never formed a joint force, resulting in China's general machinery in the international competitiveness can not be quickly improved.
What is even more worrying is that when the general machinery industry has not resolved its own contradictions well, the global economy is affected by the subprime crisis in the United States, growth slows down, market demand has fallen, raw material prices have risen, financial institutions have tightened monetary policy and many other issues. Unfavorable factors work together to make the general machinery industry overwhelmed. Some companies have experienced a decline in profits and financial constraints. Zhai Yongbin believes that the macroeconomic situation has brought difficulties to the industrial structure adjustment and benign development of the general machinery industry. However, this is also a critical moment to test the company’s core competitiveness and show its true level. After a big wave of scouring, China’s general machinery industry will Healthy and more internationally competitive. Judging from the current market development situation, China is in a critical period of industrialization and modernization. There is a huge market for domestic demand, and the total demand for general machinery will still maintain a long period of prosperous growth. This is a long-term trend in the general machinery industry. The market foundation for healthy development. However, Zhai Yongbin also reminded companies that from the perspective of macroeconomic development, the current economic trend is still declining. The general machinery industry has not yet arrived at the most difficult time. As long as the most difficult time has passed, China's general machinery industry is bound to usher in. A new round of rapid development.
Energy Saving and Innovation
Is the key to strong industry
Speaking of the future development trend of the general machinery industry, Yan Yongbin said that from the 30 years of development experience in reform and opening up, improving independent innovation capability is the key to breaking the bottleneck of the development of the general machinery industry. The main direction of innovation is energy conservation and environmental protection. Energy conservation and environmental protection are the trend of global industrial development. In other words, by mastering the most advanced energy-saving and environmental protection technologies, we have the right to speak in the future market. There are three main ways of innovation: first, original innovation; second, introduction, digestion, absorption, and innovation; and third, integrated innovation. Integrated innovation is an important part of independent innovation. It integrates each existing technology item organically and integrates it to form a new product or business management method, creating a new economic growth point. The main body of integrated innovation is the enterprise. The purpose is to integrate various elements effectively, occupy more market shares, and create greater economic benefits. In the process of modern socialized production, the degree of industrial correlation has been increasing, the interdependence of technologies has increased, and breakthroughs in individual technologies can no longer be achieved. It is necessary to integrate productivity by establishing relevant management technologies and establishing corresponding management models. And competitiveness. In this context, to a certain extent, integrated innovation has a continuous advantage. In the development of modern science and technology, the integrated innovation of related technologies and the resulting competitive advantages often far exceed the significance of a single technological breakthrough. At present, some companies in the general machinery industry have begun to focus on integrated innovation and have the ability to export complete sets of products to foreign countries.
In addition, companies must also improve their supporting capabilities on large projects, especially in key national large-scale projects such as nuclear industry and coal chemical industry, and domestic brands should play their due role.
Yan Yongbin also believes that in the adjustment of industrial structure, the general machinery industry should increase integration, reorganization, and increase industrial concentration. He emphasized that several issues must be paid attention to in the process of industrial restructuring, restructuring, and formation of a group: First, we must be careful about the acquisition of foreign capital, foreign private capital, or even large state-owned companies. The judgment criteria should be whether it is conducive to national economic security and whether it is beneficial to enterprises. And the development of the industry; the second is to cherish the enterprises in the region that already have comparative advantages in the country, especially for the industry leaders who encounter temporary difficulties in the reform, to give necessary support and coordination, and to protect the hard-won comparative advantages. Third, the joint reorganization should conform to the development laws and economic laws of the industry. Fourth, the complete set of products or major products as the leader, to form a cooperative supporting relationship; Fifth, a large quantity of products should scale production. Using the Olympic Spirit to Run a Streaming Machine Show
The current preparations for the "4th China International Fluid Machinery Exhibition", which is sponsored by the China General Machinery Industry Association and is receiving much attention from the fluid machinery industry at home and abroad, are being carried out in an intense and orderly manner. The theme of this exhibition is "energy saving, environmental protection, harmony, and development." With the success of the Beijing Olympics, the largest and highest level in the history of the Olympic Games, the 4th China International Fluid Machinery Exhibition will also become the largest scale, highest level, and most specialized professional in the history of international fluid machinery exhibitions. The effect is also the best authoritative exhibition.
"2008 Fourth China International Fluid Machinery Exhibition" authoritative index:
â— The world's largest professional fluid machinery exhibition
The total exhibition scale reached 30,000 square meters, and more than 400 international and domestic enterprises exhibited. Sub-pumps, valves, fans, compressors, gas separation and purification equipment, separation machinery, six major sections of auxiliary transmissions, and international exhibitions were exhibited.
â—Exhibition level international first-class
More than 60 world-class companies and well-known companies, including General Electric Company (GE) and EBARA (Japan), are participating directly or exhibiting with their investment companies in China. The latest advanced products and technologies will be displayed.
More than 300 key enterprises in the domestic fluid machinery manufacturing industry participated in the fair and exhibited the newly developed products and new high technologies.
â—The best technology, business communication and cooperation platform
The exhibition received the China Iron and Steel Association (formerly the Ministry of National Metallurgical Industry), the China National Petroleum Corporation (601857) and the Chemical Industry Association (formerly the State Ministry of Chemical Industry), the China Electric Power Enterprise Association, and the China National Machinery Industry Federation (formerly National Machinery Industry Department) and other departments strongly support the exhibition; the exhibition will be widely and targeted to invite users in the fields of electric power, metallurgy, petrochemicals, environmental protection, coal, light industry, textiles, domestic and foreign engineering design institutes and engineering companies, domestic and foreign trade buyers. Investors and other visitors visited the exhibition.
It is expected that there will be 60-80,000 person-times in the industry attending the exhibition.
â— High-level theme international forum
In order to strengthen the thematic exchange and cooperation between supply and demand, domestic and foreign, production, research and research, the exhibition will hold the second international valve technology development forum and the third international fan/compressor technology development forum.
â— Authority hosted
The China General Machinery Industry Association (China Association for General Industries, CGMA) is the only national industrial organization for fluid machinery and other general machinery manufacturing industries in China. It has more than 2,000 domestic members and represents the main body of China's general machinery industry. Its purpose is to pass Services to promote the industry's technological progress and economic development. According to the professional division, China Tong Tong Association has a branch of the pump industry, a branch of the wind turbine, a branch of the compressor, a branch of the valve, a branch of the gas separation equipment, a branch of the gas purification equipment, a branch of the separation machinery, a branch of the vacuum equipment, a branch of the reduction gear branch, and a branch of the drying equipment. And dissolved acetylene equipment branch; headquarters has a comprehensive department, human resources department, information and planning department, science and technology and standards department, international cooperation department, exhibition department.
At the "2008 Fourth China International Fluid Machinery Exhibition Media Association" sponsored by the China General Machinery Industry Association, the president of the China General Machinery Industry Association Yan Yongbin stated that although the global economy is affected by the subprime mortgage crisis in the United States, growth has slowed down. The international and domestic markets are not optimistic, but China's general machinery industry maintained a good momentum of development in 2008. This not only benefited from the strong support of the state for the equipment manufacturing industry since the 16th National Congress, but also benefited from the results of the common efforts of the general machinery industry organizations, enterprises and all employees during the 30 years of reform and opening up. Technological innovation is driving the industry. The key to development recalling the development of the general machinery industry over the past 30 years of reform and opening up, Zhai Yongbin believes that technological innovation is an important driving force for the development of the general machinery industry. According to the characteristics of technological development, the development of the general machinery industry can be divided into three phases. The first stage was the late 1970s to early 1990s. In the initial period of reform and opening up, the domestic boom in cooperation with foreign countries and the active introduction of relatively advanced foreign technologies and equipment directly promoted the development of the general machinery industry. However, in the early 1990s, foreign companies paid more attention to technology and developed it. Technical cooperation is very difficult. Many foreign companies are more willing to invest in factories in China and turn China into their manufacturing base. At this time, most of the domestic enterprises in the technology are still using foreign technology in the 1970s. The secondary innovation is not enough. The introduction of technology is hindered and independent development is difficult to achieve. From the 1990s to the beginning of the 21st century, the development speed of the general machinery industry Slowly, the competitiveness of enterprises has declined and it is difficult to participate in international competition. This is the second stage. In the third stage, the 16 major countries proposed to revitalize the Chinese equipment manufacturing industry, encourage the development of the machinery manufacturing industry, and promote the construction of an innovative society. Under the policy promotion and encouragement from the government, the general machinery industry has begun a new round of rapid development, through scientific and technological research, Digestion and absorption of imported technology and technological transformation, the general machinery industry's independent innovation capabilities and market competitiveness has improved significantly, forming a set of design, manufacturing, scientific research, teaching and technical services and other types of large-scale industrial system. The economic scale has developed rapidly at a rate of about 30% in the past five years. It has provided a large number of complete sets of equipment and major products for the development of the national economy, infrastructure construction, and national defense construction, and has the ability to undertake major national technical equipment tasks.
Macroeconomic environment
Demand higher requirements for the development of the industry
Zhai Yongbin stated that although China's general machinery industry has achieved extraordinary achievements and accumulated strong foundations during the 30 years of reform and opening up, the general machinery industry has also exposed some problems in the process of rapid development. For example, the industrial structural contradictions have not yet been fundamentally solved. The domestic general-purpose machinery basically remains on the low-end products, and the phenomenon of repeated manufacturing and repeated construction is serious. Second, the degree of industrial concentration is not high. There are more than 10,000 enterprises in the general machinery industry above the scale, but so far, there are still no large-scale enterprise groups that can lead the development of the industry. Third, the competition among enterprises is still at the level of price war. Some companies are willing to participate in competitive bidding at prices below the cost in order to occupy the market. This turbulent market competition pattern has caused China's general machinery industry to go through 30 years. Development, but never formed a joint force, resulting in China's general machinery in the international competitiveness can not be quickly improved.
What is even more worrying is that when the general machinery industry has not resolved its own contradictions well, the global economy is affected by the subprime crisis in the United States, growth slows down, market demand has fallen, raw material prices have risen, financial institutions have tightened monetary policy and many other issues. Unfavorable factors work together to make the general machinery industry overwhelmed. Some companies have experienced a decline in profits and financial constraints. Zhai Yongbin believes that the macroeconomic situation has brought difficulties to the industrial structure adjustment and benign development of the general machinery industry. However, this is also a critical moment to test the company’s core competitiveness and show its true level. After a big wave of scouring, China’s general machinery industry will Healthy and more internationally competitive. Judging from the current market development situation, China is in a critical period of industrialization and modernization. There is a huge market for domestic demand, and the total demand for general machinery will still maintain a long period of prosperous growth. This is a long-term trend in the general machinery industry. The market foundation for healthy development. However, Zhai Yongbin also reminded companies that from the perspective of macroeconomic development, the current economic trend is still declining. The general machinery industry has not yet arrived at the most difficult time. As long as the most difficult time has passed, China's general machinery industry is bound to usher in. A new round of rapid development.
Energy Saving and Innovation
Is the key to strong industry
Speaking of the future development trend of the general machinery industry, Yan Yongbin said that from the 30 years of development experience in reform and opening up, improving independent innovation capability is the key to breaking the bottleneck of the development of the general machinery industry. The main direction of innovation is energy conservation and environmental protection. Energy conservation and environmental protection are the trend of global industrial development. In other words, by mastering the most advanced energy-saving and environmental protection technologies, we have the right to speak in the future market. There are three main ways of innovation: first, original innovation; second, introduction, digestion, absorption, and innovation; and third, integrated innovation. Integrated innovation is an important part of independent innovation. It integrates each existing technology item organically and integrates it to form a new product or business management method, creating a new economic growth point. The main body of integrated innovation is the enterprise. The purpose is to integrate various elements effectively, occupy more market shares, and create greater economic benefits. In the process of modern socialized production, the degree of industrial correlation has been increasing, the interdependence of technologies has increased, and breakthroughs in individual technologies can no longer be achieved. It is necessary to integrate productivity by establishing relevant management technologies and establishing corresponding management models. And competitiveness. In this context, to a certain extent, integrated innovation has a continuous advantage. In the development of modern science and technology, the integrated innovation of related technologies and the resulting competitive advantages often far exceed the significance of a single technological breakthrough. At present, some companies in the general machinery industry have begun to focus on integrated innovation and have the ability to export complete sets of products to foreign countries.
In addition, companies must also improve their supporting capabilities on large projects, especially in key national large-scale projects such as nuclear industry and coal chemical industry, and domestic brands should play their due role.
Yan Yongbin also believes that in the adjustment of industrial structure, the general machinery industry should increase integration, reorganization, and increase industrial concentration. He emphasized that several issues must be paid attention to in the process of industrial restructuring, restructuring, and formation of a group: First, we must be careful about the acquisition of foreign capital, foreign private capital, or even large state-owned companies. The judgment criteria should be whether it is conducive to national economic security and whether it is beneficial to enterprises. And the development of the industry; the second is to cherish the enterprises in the region that already have comparative advantages in the country, especially for the industry leaders who encounter temporary difficulties in the reform, to give necessary support and coordination, and to protect the hard-won comparative advantages. Third, the joint reorganization should conform to the development laws and economic laws of the industry. Fourth, the complete set of products or major products as the leader, to form a cooperative supporting relationship; Fifth, a large quantity of products should scale production. Using the Olympic Spirit to Run a Streaming Machine Show
The current preparations for the "4th China International Fluid Machinery Exhibition", which is sponsored by the China General Machinery Industry Association and is receiving much attention from the fluid machinery industry at home and abroad, are being carried out in an intense and orderly manner. The theme of this exhibition is "energy saving, environmental protection, harmony, and development." With the success of the Beijing Olympics, the largest and highest level in the history of the Olympic Games, the 4th China International Fluid Machinery Exhibition will also become the largest scale, highest level, and most specialized professional in the history of international fluid machinery exhibitions. The effect is also the best authoritative exhibition.
"2008 Fourth China International Fluid Machinery Exhibition" authoritative index:
â— The world's largest professional fluid machinery exhibition
The total exhibition scale reached 30,000 square meters, and more than 400 international and domestic enterprises exhibited. Sub-pumps, valves, fans, compressors, gas separation and purification equipment, separation machinery, six major sections of auxiliary transmissions, and international exhibitions were exhibited.
â—Exhibition level international first-class
More than 60 world-class companies and well-known companies, including General Electric Company (GE) and EBARA (Japan), are participating directly or exhibiting with their investment companies in China. The latest advanced products and technologies will be displayed.
More than 300 key enterprises in the domestic fluid machinery manufacturing industry participated in the fair and exhibited the newly developed products and new high technologies.
â—The best technology, business communication and cooperation platform
The exhibition received the China Iron and Steel Association (formerly the Ministry of National Metallurgical Industry), the China National Petroleum Corporation (601857) and the Chemical Industry Association (formerly the State Ministry of Chemical Industry), the China Electric Power Enterprise Association, and the China National Machinery Industry Federation (formerly National Machinery Industry Department) and other departments strongly support the exhibition; the exhibition will be widely and targeted to invite users in the fields of electric power, metallurgy, petrochemicals, environmental protection, coal, light industry, textiles, domestic and foreign engineering design institutes and engineering companies, domestic and foreign trade buyers. Investors and other visitors visited the exhibition.
It is expected that there will be 60-80,000 person-times in the industry attending the exhibition.
â— High-level theme international forum
In order to strengthen the thematic exchange and cooperation between supply and demand, domestic and foreign, production, research and research, the exhibition will hold the second international valve technology development forum and the third international fan/compressor technology development forum.
â— Authority hosted
The China General Machinery Industry Association (China Association for General Industries, CGMA) is the only national industrial organization for fluid machinery and other general machinery manufacturing industries in China. It has more than 2,000 domestic members and represents the main body of China's general machinery industry. Its purpose is to pass Services to promote the industry's technological progress and economic development. According to the professional division, China Tong Tong Association has a branch of the pump industry, a branch of the wind turbine, a branch of the compressor, a branch of the valve, a branch of the gas separation equipment, a branch of the gas purification equipment, a branch of the separation machinery, a branch of the vacuum equipment, a branch of the reduction gear branch, and a branch of the drying equipment. And dissolved acetylene equipment branch; headquarters has a comprehensive department, human resources department, information and planning department, science and technology and standards department, international cooperation department, exhibition department.
CD Printer uv printing machine is suitable for producing different patterns which contain relief, hollow out, flat print on different material. It is widely used on glass, wooden board, metal board, ceramic, leather, PVC, acrylic etc. It makes products value higher.
Advantge:
1. With Instant print & instant dry, it is no need pre-coating, UV proof, water proof, scratch proof, which is superior
to traditional screen printing.
2. With Easy operation & simple production. No matter printing a simple block color pattern, printing full-color pattern or a
gradient color pattern, engineer made the printer system can do in one procedure and it can also print mass production in one
template with different photos.
|
Name |
CD printer |
|
Print head |
DX5 |
|
Printer size |
33*43cm(33*60cm) |
|
Printing speed |
A4 photo/111s |
|
Printng resolution |
5760*1440dpi |
|
Nozzles |
90*6=540 |
|
Interface |
USB2.0 |
|
Net weight/Gross weight |
55Kg/60Kg |
|
Printer size |
750*630*510mm |
|
Height adjustment |
Automatic |
|
Working power |
110V/220V 50/60Hz 30-75W |
|
Operation system |
Windows 7/XP/2000/Vista etc |
|
Temperature |
5-35o |
CD Printer
CD Printer,Laser CD Printer,Digital CD Printer,Inkjet CD Printer,Mini CD Printer
Shenzhen Refinecolor Technology Co., LTD. , https://www.rfcprinter.com