Product Description:
Model RCS-20C Baby weight balance is specially made for measuring the weight of baby. After the load platform of it was remoced, it also could weightde the baby below 20kg on stand position. The baby weight balance is advanced in structure and artistic in appearnace, as well as its steady and reliable. It is the necessary measuring instrument both for moderm family, hospital or any infantcare center, etc.
Type | RCS-20 |
Max weighing | 20kg |
Min weighing | 0.2kg |
Value per division | 10g |
Power supply | AC220V DC6VÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
Product Description:
Model RCS-20C Baby weight balance is specially made for measuring the weight of baby. After the load platform of it was remoced, it also could weightde the baby below 20kg on stand position. The baby weight balance is advanced in structure and artistic in appearnace, as well as its steady and reliable. It is the necessary measuring instrument both for moderm family, hospital or any infantcare center, etc.
Type | RCS-20 |
Max weighing | 20kg |
Min weighing | 0.2kg |
Value per division | 10g |
Power supply | AC220V DC6VÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
Peristaltic pump
There are a few plaster sprayers that have a peristaltic pump (a tube squeezed by rollers) which also requires compressed air to produce a spray. These types of plaster sprayer can also spray textured coatings with particle sizes up to about 3mm diameter, providing that they are not solvent based.
Piston pump
Newer types of plaster sprayer have a piston pump, which has sufficient pressure to spray smooth (untextured) plaster without compressed air. Full airless pumps are sometimes used to spray smooth plaster, although they are not ideal as the flow rate is too low for volume projects; however, they can be used to spray solvent-based plasters.
Air operated piston type supply pumps can put out as much as 27 gpm. Like the Graco Bulldog 10:1 at about 9 gpm and the Lincoln Pile driver 5:1 at about 27 gpm. These flow-rates are calculated at a maximum of 120 cfm air supply. Material supply hoses are medium pressure at about 600 psi. These pumps are material supply pumps only and additional air is required at the Spray Gun to propel the material to the surface. These guns are usually an internal mixture type guns where the material and air exits the gun together.
Pump Assembly,Piston Pump Putty Sprayer,Electric Piston Pump Sprayer,Hydraulic Pump Assembly
Fuzhou HVBAN Mechanical Equipment Co., Ltd. , https://www.hi-sprayer.com