In the medium-pressure air compressor, the pressure sensor is a relatively important component, and it has an important relationship with the normal operation of our equipment. The installation of the sensor will affect its use, so its installation is also very important. De Nair Xiaobian summarized the four major installation precautions for the medium-pressure air compressor, hoping to help everyone.
Medium pressure air compressor pressure sensor 4 large installation precautions:
1. Before the installation, an estimate should be made according to the actual situation of the whole network.
2. The installation of the medium pressure air compressor pressure sensor should be carried out along the cable.
3. In order to ensure the final safety, at least 4 pressure sensors should be installed for each cable. One end of each line should be installed, and each branch point should also be installed. The installation distance between the sensors should be less than 200m. The maintenance personnel quickly judge the point of failure.
4. The installation of the cable may be cut off on the ground, and a pressure sensor is preferably installed at the location where the change occurs.
After setting the installation position, it is also necessary to use a special instrument to detect the atmospheric pressure and the standard temperature, and obtain the frequency response value of the sensor to ensure that the reaction signal is normal, and then punch the hole installation (please pay attention to the selection when drilling The tool, grasp the size and ensure a good seal).
Medium pressure air compressor pressure sensor 4 large installation precautions:
1. Before the installation, an estimate should be made according to the actual situation of the whole network.
2. The installation of the medium pressure air compressor pressure sensor should be carried out along the cable.
3. In order to ensure the final safety, at least 4 pressure sensors should be installed for each cable. One end of each line should be installed, and each branch point should also be installed. The installation distance between the sensors should be less than 200m. The maintenance personnel quickly judge the point of failure.
4. The installation of the cable may be cut off on the ground, and a pressure sensor is preferably installed at the location where the change occurs.
After setting the installation position, it is also necessary to use a special instrument to detect the atmospheric pressure and the standard temperature, and obtain the frequency response value of the sensor to ensure that the reaction signal is normal, and then punch the hole installation (please pay attention to the selection when drilling The tool, grasp the size and ensure a good seal).
Our wire mesh pallets are ideal for in-house or closed loop pallet distribution systems.
Stronger than wood and less expensive than plastic, our wire pallets can be used for any application that demands additional performance that traditional or disposable pallet features cannot accommodate.
Features and Benefits:
Heavy-gauge, all-welded wire mesh design
Electro-galvanized zinc-plated finish
Cost effective, eco-friendly, and reusable
Ideal for warehousing and manufacturing applications
Perfect for in-house pallets
Custom designs available
Wire Pallet,Pallet Wire Decking,Wire Pallet Rack,Wire Mesh Pallet
Dalian CS Logistics Technology Co., Ltd , https://www.dlcsem.com