The cooling of inductively coupled plasma (ICP) spectrometer generator by S&A CW-60000 water chiller

The cooling capacity of a water chiller is closely related to ambient temperature and outlet water temperature. The cooling capacity changes with the increasing temperature. When recommending chiller type to customers, S&A will make an analysis according to the cooling performance curve chart of the water chiller so as to screen a more suitable chiller.
Mr. Zhong was satisfied with S&A CW-5200 water chiller with a cooling capacity of 1,400W for cooling the ICP spectrometer generator. It was required that the cooling capacity should be 1,500W, the water flow should be 6L//min and the outlet pressure should be over 0.06Mpa. However, according to the experience of S&A in providing suitable chiller type, it will be more suitable to provide CW-6000 chiller with a cooling capacity of 3,000W for the spectrometer generator. When talking with Mr. Zhong, S&A analyzed the cooling performance curve charts of CW-5200 chiller and CW-6000 chiller. With a comparison between both charts, it was obviously that the cooling capacity of CW-5200 chiller was insufficient to meet the cooling requirement of the spectrometer generator, but CW-6000 chiller made it.
Finally, Mr. Zhong trusted in what S&A recommended and chose CW-6000 chiller with a cooling capacity of 3,000W.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6000:http://Products/ChillerCW60003000Wco.html