Thieves Stealing Missing Amateur Hurricane Female Loser One hundred people watching no one alarm

Thieves Stealing Missed Affiliate Maniac Woman 100 owners onlookers No alarm Diesel Generator | Diesel Generator Price / 2010-07-28

In broad daylight, the thief attempted to steal and his associates rushed in to flee the owner. Surprisingly, after the attack, the thieves’ gang swaggered. What is even more surprising is that with a hundred people watching, even a person who called the police did not. On July 26, a bustling scene took place in downtown Lanzhou.
The thief sneaked out to steal the lost owner
July 26, the scorching sun, the ladies of the trip have an umbrella sunshade, but who think of the parasol has become a "thievery" of the thief.
“I always thought that I was a disabled child. I thought the thieves were stealing!” Su, who passed through the southern section of Yongchang Road, witnessed the whole process of the incident.
Around 10:00 am, Ms. Su saw a middle-aged lady walk by an umbrella. The strange thing is that under the umbrella of this lady, a teenager who is about 14-year-old has been bowing to his waist and is struggling with his body. Followed by her, attracted many passers-by. When Ms. Su was puzzled, she saw the boy stretch out his "third hand," and gently pulled open the zipper of the lady's backpack to steal. She was surprised to find that the lady who was getting something from the bag had found it. "Ah, you dare to steal!" The abnormally angry woman unconsciously waved an umbrella to drive the thief. The thief panicked and screamed as he prepared to escape.
At this time, a tall man in his thirties rushed from the side of a few meters away, apart from anything else, according to the lady's face, it was two punches. The middle-aged lady who had just yelled at the thief and was about to go to the police station was smashed. The response was that after the thief’s associates retaliated, they immediately trembled with fear and trembled and fled.
What surprised all the passers-by was that after the attempted burglary and defeat of the owner, the man swung away from the downtown area with his unfulfilled thief.
No one watches the passengers
“The thieves are too arrogant!” said Ms. Su. Hundreds of people on both sides of the scene had already discovered the tricks of the thieves. However, no one had even called the police, let alone reminded and stopped them. "The thief followed the crime and the lady was beaten, and there were 10 minutes before and after!" Even more surprising to her, when she was ready to play 110, the owner had run away. At this time, a hawker kindly reminded her: "They have associates, be careful to get into trouble!"
"We often see thieves picking up customers' wallets, but they dare not say it!" said a nearby shop owner. Several thugs ransacked and sent out their whistle when they were stolen. “If we remind our customers, the people will be able to clean up ours!” Mr. Xin, a trader in a market, is a hated person, but he is threatened by the threat of violence by gangsters. He also dares not to speak out in the face of theft. His vengeance on thieves' gangs has become commonplace because he has sincerely reminded that retaliation has occurred on Yongchang Road. He said: "The thief will smash your shop, hit yours, and the thief has already run away when the police call."
Kindness reminds in exchange for punching and kicking
"Someone just made a wink and was beaten by thieves and associates!" Ms. Chen talked about a personal experience. Once on the bus, a passenger saw a thief stealing a woman’s mobile phone, and he kindly reminded the woman: “Your phone is ringing!” After the woman found a thief, she immediately shifted her position. When the car arrived at the station, the passenger was dragged to the side of the road by a group of people just under the bus. One of the “perpetrators” was the blatant “third hand” in the car.
During the investigation, a number of store operators on Yongchang Road said: “The thief on this street is very large!” At the same time, they said that the thief was a gang who stole and feared revenge. So even if they saw someone being stolen, they wouldn’t dare to. In the beginning. They also admit that because everyone is holding their own indifference, the thieves and gangs here are even more rampant. It is not uncommon to openly behave like this.
These professional thieves are organized, disciplined, have a clear division of labor, and should work together outside the house to focus attention on distracting people: if they call, hold umbrellas, buy things, etc., they are quick to "get it done." They gathered in crowded roads and worked together in groups.
In fact, these thieves were very guilty of committing crimes, and retaliation was to conceal their "fear." If a citizen chooses to call the police, the thief escapes quickly. However, because the public compromised on the arbitrariness of the thief, they were repeatedly successful.
The public helps the thieves
"Too many thief! I was stolen three mobile phones this year!" said Miss Li who lives in the West Railway Station. She was working at a company in the square. She had been stolen on buses, crossing zebra crossings, and crowded streets.
Almost every citizen has the experience of being stolen or witnessing theft. Although everyone says that they should be used as street robbers to call out people, most people choose to escape and compromise in the face of evil.
Chen Zhenhai, a lawyer from Gansu Dehe Law Offices, said that because of the withdrawal of the owner and the public and no one alerted the police, theft was not punished by law and the thief gang was even more mad. It is because of the cowardice of compromised owners and witnesses that the violent thief gang has achieved the purpose of deterrence and committing crimes even more unscrupulously. Therefore, there has been a case in which the streets openly beat the owner. The public properly assisted the thieves in their arrogance and the bluffing thieves became more frantic. This formed a vicious cycle.
Next:Installation, use and regulation of marine diesel generator sets
Previous:Became sisters and tricked into the m

Safety Seats Injection Molding Parts

There are many kinds of Plastic Injection Components, customized drawings, factory direct sales prices are more favorable, various material specifications are complete, from design to processing, we have all-inclusive, professional customer service, and provide you with the best solution.we will quickly quote you, the customer confirms the quotation and places an order, the product processing is completed and the packaging logistics is arranged, and the customer confirms the receipt Goods praise. Plastic Injection Insert Molding is versatile and durable, we only make high-quality Plastic Parts.

Plastic mold casting systems can be divided into three categories according to different types of molds:
(1) Door mold, gate and gate parting line, mold and peeling, the most simple design, convenient processing, and low cost, so more and more people use the door system to operate.
(2) Nozzle mold: The gate and gate line are not divided into types. Usually, a set of nozzle parting line is designed directly in the product design. The design is more complicated and the processing is difficult. The fine nozzle system is often selected according to the product requirements.
(3) Hot runner mold, the mold is the same structure and fine nozzle, the biggest difference is that one or more heat flow, temperature and hot pumping nozzle, but not cold feeding and demoulding, the runner and gate are directly on the product, So the port does not need demoulding, also known as pouring system, this system can save raw materials, suitable for products with expensive raw materials, high demand, difficult mold design and processing, and high cost. The heat flow channel system, also known as the heat flow channel system, is mainly composed of a heat flow channel cover, a heat flow channel plate and a temperature control electrical box. There are two commonly used heat flow channel systems: single-point heat flow channels and multi-point heat flow channels. Using a single-point thermal gate, the molten plastic is injected directly into the cavity with a single thermal gate sleeve. Multi-point hot sprue is used to branch molten material into each hot sprue sleeve and then through the hot sprue plate into the mold cavityImg 9555 Jpg

Safety Seats Injection Molding Parts,Abs Plastic Injection Handle Molding Parts,Plastic Injection Molding Abs Cover,Custom Plastic Injection Molding Car Parts

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjinjectionmolding.com