· Volvo Car Sales (Shanghai) Co., Ltd. recalled some imported 2016 XC90, 2017 XC90 and S90 cars

Recently, Volvo Car Sales (Shanghai) Co., Ltd. filed a recall plan with the AQSIQ. It will recall some imported XC90, 2017 XC90 and S90 cars from October 13, 2016. According to the company statistics, China A total of 9042 vehicles were involved in the mainland. details as follows:
(1) The total number of imported 2017 S90 vehicles produced between May 26, 2015 and September 7, 2016, totaling 274 vehicles;
(II) The 2016 and 2017 XC90 vehicles produced between April 15, 2015 and September 19, 2016, totaling 8,768 vehicles.
The air conditioning drains of some vehicles within the scope of this recall may be improperly installed during the assembly process, which may cause the condensate in the air conditioning drain to leak into the passenger compartment. If the condensed water leaks and cannot be found in time for a certain period of time, it will affect the normal operation of the electrical system such as air conditioners, and there are potential safety hazards.
Volvo Car Sales (Shanghai) Co., Ltd. will conduct free inspections of vehicles within the scope of the recall and replace the air conditioning drains if necessary to eliminate defects. Stock vehicles will be sold after the defect has been eliminated.
Volvo Car Sales (Shanghai) Co., Ltd. will notify customers by registered mail. After the official start of the recall, Volvo authorized dealers will contact the relevant owners to arrange the recall. Users can call Volvo's after-sales service hotline 400-678-1200 for consultation. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com