The flotation method of flotation machine is widely used in mineral processing applications. According to different minerals, different flotation, flotation structure and flotation process of flotation machine can be changed according to different industries, through a large number of technologies. Improvement and innovation, the flotation application of the flotation machine has been greatly improved according to the different needs of the beneficiation operation. The flotation process technology application of the flotation machine plays an important role in promoting the flotation efficiency.
The problem of heating of the flotation machine bearing is generally caused by insufficient oil or poor oil quality. The common solution to this problem is to refuel and change the quality of the oil. The overheating of the bearing can cause the components of the flotation machine to malfunction and safety. Therefore, for safety reasons, you should not buy those inferior oils in order to save money.
After thorough mixing agents coal and clay into the bottom groove of the first chamber to a flotation machine, the impeller rotates, a negative pressure chamber in the wheel, so that the bottom groove and the slurry tank are sucked by the impeller and a suction port opening into the The mixing zone also allows air to enter the mixing zone along the gas guiding sleeve where the slurry, air and medicament mix.
Under the action of the centrifugal force of the impeller, the mixed slurry enters the mineralization zone, the air forms bubbles and is pulverized, and fully contacts with the coal particles to form mineralized bubbles, which are evenly distributed in the trough under the action of the stator and the turbulent plate. The section is moved upwards into the separation zone, enriched to form a foam layer, and discharged by a foaming mechanism to form a clean coal foam.
The coal particles that are not mineralized on the bottom of the tank will be mixed, mineralized and separated again through the circulation hole and the upper suction port.
Part of the slurry that is not sucked by the impeller under the trough enters the bottom of the second chamber through the middle quarry buried in the slurry. After completing the entire process of the first chamber, it enters the third chamber, and the flotation machine is recirculated so that the slurry passes through the last. After one room, enter the tailings bin to discharge the final tailings. It is an important equipment that is indispensable in the beneficiation production line.
The working capacity and working period of the flotation machine are the same as other machines. It is decided to maintain and maintain the normal work of all the main parts. All the working parts should be carefully checked in 3-4 months, and the new flotation machine should work initially. The months must be checked frequently, so the skill of the flotation machine during the use of the operator (responsible for maintenance) must be proficient, so that when there are some special situations, it can be quickly and effectively solved.
Pla Film Blowing Machine,Blown Film Extruders,Blown Machine,Blown Film Extrusion Line
Zhejiang Zhoushan Beiyang Plastic Machinery Technology Co.,Ltd , https://www.beiyangmachinery.com