What is the used car identification method?

Drivers who have just got a driver's license because of the immature relationship between vehicles, use a good car too much waste, will buy a used car to practice the hand, and other driving experience rich and then open a new car; some people because of economic ability, only Can afford to use a used car. At present, the purchase of second-hand cars is increasing. When buying a used car, it must first be identified to see if the car is the same as it was introduced. So, what is the used car identification method?

二手车鉴定方法是什么_副本1.jpg

Second-hand car identification method:

1. Check the tire tread pattern of the used car to see if there is any wear, defect, or aging.

2. Carefully examine the gap in the door to see if it fits in and out of balance. Then open the door to see if there is any deformation of the door frame, whether the above welding point has been re-changed, or is it not the factory original glue point.

3, look at the window above the logo is not the original manufacturer of the brand, glass sealing tape has not leaked, but also the whole is not neat.

4, ABC column has no traces of paint, impact, wear, whether the shape is good there is no deformation.

Whether the rubber strip in the engine compartment exists or not, there is no deformation inside or the like.

二手车鉴定方法是什么1_副本.jpg

5. Carefully identify the interior of the engine to see if the parts have been replaced or if they have been deformed. The interior of the cabin is no longer waiting for rubber strips. Then check the top cover of the engine to see whether the gap size on both sides of the hatch cover is the same and whether it is even. If the gap is not the same size, most of the gaps are caused by the vehicle's large collision.

6, try to drive a section of the road, try to choose the level of the road to open, pay attention to whether the vehicle has noise during driving, the vehicle features such as good or not. After getting off the bus, get off the car for some distance. From a distance, look at the alignment of the vehicle.

What is a used car identification method? There are many contents of a car, so when identifying a used car, it is not only necessary to “see” but also to “try”, “hear”, “hear”, etc. A certain understanding, so it is recommended that in the identification of used cars, it is best to find people who understand the auto repair industry, will not send money to sell an accident car.


Rivet Nuts/Screws

Rivet Screws, Blind Rivet Nuts, Stainless Steel Rivet Nuts

Ningbo Brightfast Machinery Industry Trade Co.,Ltd , http://www.brightfastener.com