Application of New Chemicals-FC in Desulfurization of Iron Concentrate

Abstract New agents acting between the magnet magnetic -FC mineral ore pyrite mineral surface can vary greatly. Pyrrhotite is activated, which facilitates the separation of pyrrhotite from iron ore.
Key words new agent-FC iron ore flotation magnetic separation
At present, there are a large number of magnetite mines in China, which cannot be used due to their high sulfur content. Looking for new sulfur removal agents, it is important to reduce the harmful impurities in magnetite ore to below 0.15%. The magnetite of a certain place is magnetically selected to obtain 67.25% of iron concentrate and 2% of sulfur. In order to reduce the sulfur grade in the iron concentrate, the flotation method was selected, and the new sulfur-removing agent-FC activated pyrrhotite was added to separate it from the magnetite. Finally, the magnetite grade was 68.14%, and the sulfur content was 0.097%, which reached the special quality iron concentrate.
1 ore type and mineral composition
The type of ore in this deposit is relatively simple and is a medium sulfide dolomite iron ore. The iron minerals in the ore are mainly magnetite, followed by siderite, a small amount of hematite, and the secondary oxide is limonite; the sulfide is mainly pyrrhotite, followed by a small amount of pyrite and nickel yellow iron. Mines, other gangue minerals are dominated by dolomite, followed by quartz , calcite and biotite ; altered minerals are chlorite fossils.
2 dressing test
According to the nature of the ore, grinding 85%-200 mesh, using a coarse and a fine magnetic separation process, obtaining 67.25% iron concentrate, sulfur content 2%, iron concentrate recovery rate 98.38%. The magnetic separation test procedure is shown in Figure 1, and the test results are listed in Table 1.
Table 1 Magnetic separation test results
product name
Yield(%)
grade(%)
Recovery rate(%)
Concentrate
48.30
67.25
2.00
98.38
66.33
Tailings
51.70
1.03
0.95
1.62
33.67
Feed mine
100.00
33.02
1.46
100.00
100.00
[next]
After the magnetic separation, the iron concentrate contains sulfur exceeding the standard. To solve this problem, we were investigated carbonate, sodium sulfide, copper sulfate, several new agents -FC activators, by testing only the addition of new agents -FC, down to 0.097% sulfur, sulfur-containing iron ore reached the super Standard. The test procedure is shown in Figure 2, and the test results are listed in Table 2.
[next]
Table 2 Magnetic separation - flotation test results
Activator
product
Yield(%)
grade(%)
Recovery rate(%)
species
Dosage (g / ton)
iron
sulfur
iron
sulfur
Sodium carbonate
500
Sulfide
1.80
54.52
7.55
2.86
9.31
Iron concentrate
47.70
67.58
1.66
94.09
54.23
Tailings
50.50
2.07
1.05
3.05
36.46
Feed mine
100.00
33.43
1.46
100.00
100.00
Copper sulfate + sodium sulfide
400+200
Sulfide
2.10
51.66
9.67
3.22
13.91
Iron concentrate
47.90
65.90
1.54
93.58
50.52
Tailings
50.00
2.16
1.04
3.20
35.57
Feed mine
100.00
33.73
1.46
100.00
100.00
New Pharmacy - FC
1000
Sulfide
6.7
61.71
13.84
12.52
63.56
Iron concentrate
41.60
68.14
0.097
85.86
2.77
Tailings
51.70
1.44
0.95
1.62
33.67
Feed mine
100.00
33.74
1.46
100.00
100.00
3 conclusions
(1) New agent-FC is a highly efficient pyrrhotite flotation agent, which promotes the effective separation of magnetite and pyrrhotite in the desulfurization and flotation of an iron concentrate.
(2) New pharmaceuticals - FC has a wide range of sources, low prices, and has the value of promotion and application.

The multifunction Busbar Processing Machine is the patented product developed by our company. Comparing with the traditional busbar processing machine, this product has the following advantages and features:

1. The punching unit adopts column structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;

2. The shearing unit adopts round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;

3. The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;

4. This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;

5. The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;

6. This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals;

7. Swappable dies offering extreme convenience;

8. PLC control that is stable and reliable.

Busbar Processing Machine

Cnc Punching Machine,Busbar Processing Machine,Steel Angle Punching Machine,High Speed Punching Machine

JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com