(l) Treatment of cyanide-containing wastewater by activated carbon adsorption catalytic oxidation is a new method studied in recent years. The cost of treating wastewater is low. While treating cyanide in wastewater, it can recover valuable metals such as gold , achieving comprehensive recovery and significant benefits, opening up a new way for converting from pure consumption to profitable sewage treatment. The treated wastewater has less impurities such as Cu, Pb, Zn and Cl, and the drainage outside the tailings dam can be recycled completely, achieving a good effect of “zero emissionâ€. It can not only save the cost of using fresh water, but also avoid the sewage discharge fee and solve the problem of water shortage.
(2) Pipeline aeration method is one of the good methods for the secondary treatment of cyanide-containing wastewater by acidification. It also increases the recovery of NaCN and allows wastewater to reach the standard.
(3) The natural purification method is a conventional method for discharging wastewater directly into the tailings dam without manual treatment. After natural purification, the wastewater is completely returned to the recycling. This method should be used with caution. The return of wastewater does not produce a vicious circle. It is required that the tailings dam can not leak, pollute the groundwater and surface water, and it is far away from the water source breeding area and the nature reserve. Although the method is simple in saving money, it is dangerous, and once it leaks and runs, the consequences are very serious. If there are no safety and protective measures, it is not suitable
(4) Combined process of acidification, chlorination and natural purification. The first step is to recover cyanide by acidification and reduce the cost of wastewater treatment. The second step is to treat the remaining cyanide in the wastewater by chlorination method; finally, the natural purification of the tailings dam can achieve the good effect of high cyanide and low emission, and it is suitable for the place where the wastewater discharge index is strict. But the process is more complicated and the cost investment is higher.The purpose of the powder making is to process the wheat after the cleaning and water adjustment through the Automatic Flour Machine, to make the special powder suitable for different needs, special powder, fine powder, standard powder and so on, and separate the by-products at the same time. The most complex and most important section of wheat processing is the most complex and most complex process of wheat processing. The key to the process of pulverization is how to separate the endosperm from wheat skin and wheat embryos as completely as possible. Therefore, the first problem to be solved is how to achieve high quality flour after the flour mill is produced, and the rate of powder production is high, which is also the process of pulverizing. It is complex. With the development of society, special flour has become a trend, and the requirements for automatic flour mills are getting higher and higher.
If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Automatic Flour Machine
Automatic Flour Machine,Automatic Flour Machine Equipment,Wheat Flour Grinding Machine,Automatic Grinding Machine
Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com