Cold and Hot Impact Tester for Industrial or Laboratory Usage

Model NO.: YTST-108
Pre-Heat Limit: +200 Degree
Internal Size(mm): 600*400*450
Temp.Constancy: +/- 2degree
Temp.Recover Time: Within 5 Min
Material: Stainless Steel
Insulation: PU & Fiberglass Wool
Circulation: Sirocco Fan
Heating: Stripped Wire Heater
Controller: Digital Controller
Warranty: 12 Months
Trademark: Yuan Yao
Transport Package: Strong Wooden Cases
Specification: CE, TUV, SGS Certificate
Origin: Guangdong, China
HS Code: 9032100000
Model NO.: YTST-108
Pre-Heat Limit: +200 Degree
Internal Size(mm): 600*400*450
Temp.Constancy: +/- 2degree
Temp.Recover Time: Within 5 Min
Material: Stainless Steel
Insulation: PU & Fiberglass Wool
Circulation: Sirocco Fan
Heating: Stripped Wire Heater
Controller: Digital Controller
Warranty: 12 Months
Trademark: Yuan Yao
Transport Package: Strong Wooden Cases
Specification: CE, TUV, SGS Certificate
Origin: Guangdong, China
HS Code: 9032100000
 Cold and Hot Impact Tester for Industrial or Laboratory Usage
1 Material: Stainless steel
2 Circulation: Siroco fan
3 Controller: 1P

Application
Cold and Hot Impact Tester is applied to test electronic chip IC, PCB, of semiconductor ceramic and polymer materials physical changes, and test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment.

Specification
1. The standard of MIL, IEC, JIS.
2. Setting easy
3. High efficiency
4. Excellent performance
5. Multiple safety protection device

Cold and Hot Impact Tester for Industrial or Laboratory Usage


Feature
1. According to the testing standard of MIL, IEC, JIS.
2. Equipment with superior temperature recovery performance.
3. Pneumatic basket movement design to move specimen safety.
4. Micro processor, multi function control. To control and monitor the Compressor, the solenoid valve and the heater.
5. Appointment function, the equipment can be activate and start for operation through setting.
6. Can choose one paragraph of control or the multi-screen process to increase the convenience of its operation.

Except Cold and Hot Impact Tester, Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:

Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

If you are interested in our products, pleadse let us know.
Model YTST-056 YTST-087 YTST-126
Internal Dim.W×H×D(mm) 400×350×440 500×350×500 600×350×600
External Dim.W×H×D(mm) 1500×2050×2120 1600×2050×2220 1700×2050×2320
Pre-heat Limit +200°C
Pre-cool Limit -60°C     -75°C
Test Temp. Range +60°C ~+150°C;   -10°C~-50°C;   -10°C~-65°C
Performance Temp. Constancy ±2°C
Temp. Recover Time Within 5 mins
Heat-up Time °C 150 150 150
min 30 30 30
Pull-down Time °C -50       -65 -50       -65 -50       -65
min 90       90 90       90 90       90
Material Exterior Stainless steel plate + Powder Coated
Interior SUS # 304 stainless steel plate (Hairline Finish)
Insulation PU & Fiberglasswool
Systems Circulation siroco fan
Heating stripped wire heater
Refrigeration Compressor+Evaporator fins+water-cooling condenser
Controller 1P
Other Components Exper iment separation shelves(freely adjustable 2pcs)
Safety Devices No fuse breaker,Motor overload protection High/low pressure shut off device,
Open door operation prevention switch, Flow switch protector cooling water.
Power Source(K.W.) AC 1Ψ 220V;3Ψ 380V 60/50Hz
90       90 90       90 90       90
 Cold and Hot Impact Tester for Industrial or Laboratory Usage
1 Material: Stainless steel
2 Circulation: Siroco fan
3 Controller: 1P

Application
Cold and Hot Impact Tester is applied to test electronic chip IC, PCB, of semiconductor ceramic and polymer materials physical changes, and test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment.

Specification
1. The standard of MIL, IEC, JIS.
2. Setting easy
3. High efficiency
4. Excellent performance
5. Multiple safety protection device

Cold and Hot Impact Tester for Industrial or Laboratory Usage


Feature
1. According to the testing standard of MIL, IEC, JIS.
2. Equipment with superior temperature recovery performance.
3. Pneumatic basket movement design to move specimen safety.
4. Micro processor, multi function control. To control and monitor the compressor, the solenoid valve and the heater.
5. Appointment function, the equipment can be activate and start for operation through setting.
6. Can choose one paragraph of control or the multi-screen process to increase the convenience of its operation.

Except Cold and Hot Impact Tester, Dongguan Yuan Yao Electronics Technology Co., Ltd also can supply:

Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.

If you are interested in our products, pleadse let us know.
Model YTST-056 YTST-087 YTST-126
Internal Dim.W×H×D(mm) 400×350×440 500×350×500 600×350×600
External Dim.W×H×D(mm) 1500×2050×2120 1600×2050×2220 1700×2050×2320
Pre-heat Limit +200°C
Pre-cool Limit -60°C     -75°C
Test Temp. Range +60°C ~+150°C;   -10°C~-50°C;   -10°C~-65°C
Performance Temp. Constancy ±2°C
Temp. Recover Time Within 5 mins
Heat-up Time °C 150 150 150
min 30 30 30
Pull-down Time °C -50       -65 -50       -65 -50       -65
min 90       90 90       90 90       90
Material Exterior Stainless steel plate + Powder Coated
Interior SUS # 304 stainless steel plate (Hairline Finish)
Insulation PU & Fiberglasswool
Systems Circulation siroco fan
Heating stripped wire heater
Refrigeration Compressor+Evaporator fins+water-cooling condenser
Controller 1P
Other Components Exper iment separation shelves(freely adjustable 2pcs)
Safety Devices No fuse breaker,Motor overload protection High/low pressure shut off device,
Open door operation prevention switch, Flow switch protector cooling water.
Power Source(K.W.) AC 1Ψ 220V;3Ψ 380V 60/50Hz
90       90 90       90 90       90

Rotational Molding Machine

rotomachinery,rotational molding,rotational molding process

Sentis Equipment Co.,Ltd , https://www.spemachine.com