Tools / raw materials
Carburetor cleaning agent
2. Cross knife
3. Word knife
4. Plum eight or plum ten
5.T seven (T-sleeve seven) or plum seven
Method / step
1 Remove the carburetor from the motorcycle first.
Turn off the oil and unplug the tubing. Use the plum eight or plum ten (depending on the size of the nut) to twist the nut that connects the carburetor to the engine, then twist the screw connected to the carburetor and the filter, and finally remove the throttle line. 
2 Remove the carburetor float chamber
Use a cross knife to twist the three screws of the carburetor float chamber cover 
3 Understanding Carburetor
After decomposing the carburetor, let's take a look at the names of its parts. 
4 Decomposition of carburetor parts
Remove the main injector hole of the carburetor, the idle oil injection hole and the float 
5 Start cleaning the carburetor
Use a carburetor cleaner to align the various orifices (note that the eyes should not be aligned with the carburetor to prevent the cleaning agent from being sprayed into the eyes) 
6 loaded carburetor
After cleaning, the carburetor can be installed. Then you can put him in the car. 
(Source: Network Invasion)
Cnc Machining Centers,Cnc Machine,Double Column Milling Machine,CNC Vertical Maching Centers,CNC Gantry Type Maching Centers
Qingdao Jiujin Machinery Co., Ltd , https://www.jiuinmachine.com