DL, DLR-type pump Vertical single suction multi-stage segmented centrifugal pump for the delivery of water containing no solid particles and the physical and chemical properties similar to the liquid water used mainly for high building water supply can also be used in factories and mines to Drainage, liquid flow rate of 4.9 ~ 200m3 / h, head range of 22 ~ 239m, supporting the power range of 1.5 ~ 160KW, diameter range of Φ40 ~ Φ150mm.
Model meaning:
80 ------ pump suction nominal diameter (mm)
DL ------ vertical multi-stage centrifugal pump
DLR ------ Vertical multi-stage hot water centrifugal pump
4 ------ pump series
Application:
DL, DLR series pump is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, fire pressurization, long distance water supply, heating, bathroom, boiler heating and cooling water circulation, air conditioning and refrigeration systems, water supply and equipment and other occasions. DL type medium temperature does not exceed 80 ℃, DLR-type medium temperature does not exceed 120 ℃.
Parts Material:
The DL type pump is composed of a motor and a pump. The motor is a Y-type three-phase induction motor. The pump and the motor are connected by a coupling. The whole is a rigid connection, and no correction is needed. The pump consists of a stator part and a rotor part. Pump stator part by the water section, the middle section, guide vane, water section, stuffing box and other parts. In order to prevent the fixed wear, the stator is equipped with a seal ring, a balance sleeve and the like. The worn part can be replaced by a spare part. The rotor part is borne by the shaft, the middle wheel and the balance drum, and the remaining small part residual axial force is supported by the angular contact ball bearings. The water inlet section, the middle section and the water outlet section are sealed by tightening with paper pads. Seal with packing or mechanical seal, the user can choose according to need. Pump rotation direction from the drive side down to counterclockwise rotation.
Electric Wire Rope hoist
Maximum Load:1000-100,1000kg
This novel VT type Electric Wire Rope Hoist is made with 13 patented technologies.
As contrasted with conventional designs, the VT type electric wire rope hoist is a revolutionary new generation product. It houses many brilliant brilliant attributes, such as a superb performance, short headroom, accurate positioning, great operating comfort, and maximum security and reliability, all encompassed in a compact design. It is a multi-functioning machine that has revolutionized the way the wire rope hoist is designed and manufactured.
With a hoisting capacity ranging from 800kg to 250,000kg,the lift can take the load up to a maximum height of 103.6m.Plenty of models, Configurations and specifications exist for the hoist, from which customers are sure to find the perfect match.
Advantages
Short headroom allows large vertical operating space for the wire rope hoist. Size-C hoist design leaves more vertical space for lifting. Such attribute can be hardly found in any of its contemporaries. The hoisting Hook can reach much closer to the side walls. Minimum side clearance effectively enlarges the work area.
Dynadrive is designed for stable running and fast positioning. It can minimize the load sway and improve operating safety and comfort. Each component of our electric wire rope hoist is rigorously inspected and tested by our qualified engineers to ensure the safety and working efficiency the final product.
A high load factor 60% can be achieved of the motor, whose cooling performance is 30% higher than other similar products. High performance safety brake has a use life exceeding 1 million cycles. The brake can adjust itself according to the degree of wear. This design requires limited maintenance.
Large-diameter Cable Reel is designed for extended use life and small fleet angle. During lifting, the rope only deviates a little to the side of the drum, which ensures vertical lifting, accurate positioning, and maximum operating convenience.
Given customer needs for performance and ease of operation. ergonomic features are added to the electrical wire rope hoist to increase operating safety and comfort. Double-layer protective polypropylene coating of the pendant control station enables an IP65 rating.
Plenty of options exist, in order to accommodate various customer needs.
Non standard rail width
Special rail gauge
Radio Remote Control
Traveling limit switch
Derailment catches on double girder trolley
Phase protection relays
Hoist travel monitoring device
Sound and light alarm
Explosion proof and/or spark proof hoist
Load indication device
Motors thermal protection
Stainless steel hoist electrical cubicle:IP55 or IP65
Class H motors
Secondary brake
Variable speed lifting
CSA electric control
For any other special requirements, please contact us.
Electric Wire Rope Hoist,Electric Hoist For Crane,Proof Wire Rope Electric Hoist,Wire Rope Electric Hoist
Eurocrane (China) Co., Ltd. , https://www.eurocranegroup.com