According to editors, the issue of automobile quality is a key topic that has been accompanied by the development of the automotive industry for a long time. With the continuous maturation of the domestic automobile consumption market, the awareness of rights protection of Chinese consumers has gradually been “awakenedâ€, and more and more people are paying attention to buying a car. After-sales rights, coupled with the government's relevant departments to improve the supervision of vehicle quality issues, domestic and foreign car companies can not and can no longer casually "trampled" the legitimate rights and interests of consumers, the car recall is bound to tend to normalize. In order to facilitate readers to fully understand the recall situation of domestic cars, Gasgoo carefully arranged the recall events of various models in 2011 in China, so stay tuned!
(ranked by number of recalls)
★ Recalled models: Dongfeng Nissan Qijun
Starting recall time: December 9, 2011 Number of recalls: 1,098 recalled vehicles Date of manufacture: October 9, 2010 - December 20, 2010 Recall Reason: Due to reasons of vehicle power steering to electronic controller module suppliers, After a long period of use, the terminal soldering joints may come off, causing heavy steering and potential safety hazards.
Measures: Dongfeng Motor Co., Ltd. will replace the vehicles in the recall range with qualified power steering electronic controller modules to eliminate hidden troubles.
★ Recalled models: Dongfeng Nissan
Starting recall time: December 9, 2011 Number of recalls: 2,509 vehicles recalled Date of manufacture: September 24, 2010 - December 20, 2010 Reason for recall: Due to reasons of vehicle power steering to electronic controller module suppliers, After a long period of use, the terminal soldering joints may come off, causing heavy steering and potential safety hazards.
Measures: Dongfeng Motor Co., Ltd. will replace the vehicles in the recall range with qualified power steering electronic controller modules to eliminate hidden troubles.
★ Recalled models: Lexus RX300
Starting recall time: December 1, 2011 Recall quantity: 426 vehicles recalled Date of manufacture: June 1, 2004 - March 31, 2005 Reason for recall: Due to the insufficient amount of adhesive applied between pulley outer wheel and anti-vibration rubber. Caused by the use of peeling between the outer wheel and the rubber during use, the pulley idling, resulting in abnormal sound, charging warning light lit. Under extreme circumstances, there may be a possibility that the power steering pump belt is disengaged, resulting in a sudden increase in the steering operation force, posing a safety hazard.
Measure: Toyota China will inform the user by way of user letter, and ask the user to send the vehicle to the nearest Lexus dealership. After confirming with professional maintenance technicians, replace the crankshaft pulley of the vehicle.
★ Recalled models: BMW 5 Series GT, 7 Series, X5, X6
Starting recall time: November 21, 2011 Number of recalls: 2,862 vehicles recalled Date of manufacture: November 2007 - February 2011 Reasons for recall: The vehicle is equipped with 8-cylinder or 12-cylinder engines. The electronic water pump installed on the engine may be Because the circuit board is damaged and does not work, an individual vehicle may have a circuit board overheating, and when it is serious, it may cause the circuit board to burn, resulting in a safety hazard.
Solution: BMW authorized dealers will contact the relevant customers to replace the electronic water pump for customers free of charge to eliminate the hidden troubles.
★ Recalled models: Rolls-Royce Gust
Starting recall time: November 21, 2011 Number of recalls: 336 vehicles recalled Date of manufacture: May 2009 - March 2011 Cause of recall: The vehicle is equipped with an 8-cylinder or 12-cylinder engine. The electronic water pump installed on the engine may be Because the circuit board is damaged and does not work, an individual vehicle may have a circuit board overheating, and when it is serious, it may cause the circuit board to burn, resulting in a safety hazard.
Solution: Rolls-Royce authorized dealers will contact the relevant customers to replace the electronic water pump for customers free of charge to eliminate the hidden troubles.
★ Recalled models: Infiniti G37
Starting recall time: November 17, 2011 Recall quantity: 4 vehicles recalled Date of manufacture: July 2, 2011 - August 29, 2011 Recall reason: When changing the front door electric window lifter switch computer program, write The procedure of entering the computer is not appropriate, resulting in the anti-pinch function of the electric window lift switch. The load of starting the return force of the glass is larger than the design value. In some cases, the human body may be caught by the window glass and there is a safety hazard.
Treatment measures: Nissan (China) Investment Co., Ltd. will replace the glass lift switches of the left and right electric windows with improved parts by the relevant authorized dealers for the vehicles involved in the defects.
★ Recalled models: Maserati GTS sports car
Starting recall time: September 30, 2011 Number of recalls: 6 vehicles recalled Date of manufacture: August 31, 2010 - November 19, 2010 Reason for recall: Vehicles are repeatedly high due to non-compliant transmissions In the load movement mode, the gearbox may be damaged, eventually causing internal breakage of the gearbox, and the rear wheels of the vehicle are locked, causing potential safety hazards.
Approach: Ferrari Maserati Automotive International (Shanghai) Co., Ltd. will replace the vehicle in the recalled area with a new one to eliminate this defect.
★ Recalled models: Subaru Legacy and Outback
Starting recall time: September 28, 2011 Number of recalls: 36728 Vehicles recalled Date of manufacture: November 4, 2009 - May 17, 2011 Cause of recall: Defects in the front wiper motor of the car Disposal method: Subaru China will Replace the front wiper motor cover for the recalled vehicle to eliminate defects.
★ Recalled models: Guangzhou Automobile Honda Fit
Starting recall time: September 15, 2011 Number of recalls: 145,542 vehicles recalled Date of manufacture: August 8, 2005 - December 8, 2007 Reasons for recall: When the vehicle's driver's seat side power window switch is exposed to exotic silicone When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Guangzhou Automobile Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Guangzhou Automobile Honda Sidi
Starting recall time: September 15, 2011 Number of recalls: 81,547 vehicles recalled Date of manufacture: August 1, 2005 - August 22, 2007 Reason for recall: When the vehicle's driver's seat side power window switch receives foreign silicon When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Guangzhou Automobile Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Dongfeng Honda CR-V
Starting recall time: September 15, 2011 Number of recalls: 28,677 vehicles recalled Date of manufacture: January 11, 2006 - March 5, 2007 Reason for recall: When the vehicle's driver's seat side power window switch receives foreign silicon When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Dongfeng Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Toyota Yaris
Starting recall time: September 13, 2011 Number of recalls: 10,587 vehicles recalled Date of manufacture: April 12, 2010 - January 4, 2011 Cause of recall: Because the left side A-pillar interior is improperly installed, when the side curtain is in When the vehicle expands during a collision, the interior parts may come off and damage the occupant on the left seat.
Solution: Toyota China will check the installation of the interior, and if necessary repair it.
★ Recalled models: imported Mercedes-Benz ML
Mercedes-Benz ML Class Recall Time: September 13, 2011 Number of recalls: 712 recalled vehicles Date of manufacture: August 1999 - June 2004 Reasons for recall: Plunger movement in vehicle brake light switch, affecting cruise control The control releases the signal transmission and the driver cannot release the cruise control when the brake pedal is lightly pressed. When a defect occurs, the driver can deactivate the cruise state by pressing the brake pedal deeply or using the cruise control lever.
Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will conduct free maintenance on all involved vehicles and replace brake light switches to eliminate hidden troubles.
★Recalled models: Dongfeng Peugeot 408
Starting recall time: September 9, 2011 Number of recalls: 25,792 recalled vehicles Production date: January 18, 2010 - August 17, 2011 Reason for recall: Due to poor stability of engine software's low speed adaptation, the vehicle is starting or There is a flameout at low speeds.
Solution: Shenlong Motor Co., Ltd. will upgrade the vehicle software within the recall scope free of charge to eliminate potential faults.
★ Recall models: Maserati President Series Sedan and Maserati GT Sports Car
President Maserati began recalling: September 6, 2011 Number of recalls: 37 imported Maserati president series and 19 Maserati GT sports car recalled vehicles Production date: July 3, 2008 - September 30, 2008 Recall reason: Due to machinery Processing does not conform to the specifications, resulting in the inner tie rod size does not meet specifications, if you continue to use, when encountering complex road conditions, it may lead to failure of the tie rod, in severe cases will break, leading to the driver can not control the car.
Solution: Maserati will upgrade the recalled imported sedan sports car to eliminate hidden troubles.
★Recall models: FAW Toyota Corolla EX
Starting recall time: August 16, 2011 Recall quantity: 33,809 vehicles recalled Date of manufacture: October 23, 2010 - January 29, 2011 Recall reason: Accumulated static electricity due to insufficient electrostatic protection of the vehicle's engine casing It may affect the normal operation of the engine of the engine and make the engine unable to start. Under extreme circumstances, it may cause the engine to stall.
Approach: Tianjin FAW Toyota Motors Toyota Motor Co., Ltd. will install wiring harnesses between the engine casing and the vehicle body to eliminate the hidden dangers caused by static electricity.
★ Recalled models: Guangzhou Automobile Honda Accord
Starting recall time: August 8, 2011 Number of recalls: 605,025 Vehicles Recalled Date of manufacture: July 20, 2004 - October 8, 2009 Reason for recall: The vehicle is in a poor condition where similar wheels are stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Guangzhou Automobile Honda Automobile Co., Ltd. will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Guangzhou Automobile Honda Odyssey
Starting recall time: August 8, 2011 Number of recalls: 151,489 vehicles recalled Date of manufacture: July 7, 2004 - September 2, 2009 Reasons for recall: Vehicles are in poor condition where similar wheels get stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Guangzhou Automobile Honda Automobile Co., Ltd. will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Dongfeng Honda Think Platinum Core
Starting recall time: August 8, 2011 Number of recalls: 4001 vehicles recalled Date of manufacture: August 6, 2009 - November 24, 2009 Reason for recall: Vehicles are in poor condition where similar wheels are stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Dongfeng Honda Automobile Co., Ltd will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Dodge Coolway
Starting recall time: August 1, 2011 Number of recalls: 1,708 vehicles recalled Date of manufacture: August 3, 2009 - January 23, 2010 Reason for recall: Due to deviations in the manufacturing process of a certain batch of anti-theft modules, vehicles Driving on a bumpy road or due to a driver's misoperation may cause the ignition key to go from an “On†position to an “Accessory†position while driving, which may cause the engine to stall and the vehicle to lose control.
Approach: Chrysler Group LLC will inspect all vehicles that may have this hidden danger and replace relevant parts for consumers free of charge.
★ Recalled models: Fiat Bo Yue
Starting recall time: July 6, 2011 Number of recalls: 1223 vehicles recalled Date of manufacture: March 20, 2008 - November 8, 2010 Reason for recall: Due to the long time fixed in the transportation during the transportation On the tool, the stress concentration of the brake caliper is caused, which may cause the rear brake caliper frame of the vehicle to break with the connection arm of the float clamp, which may cause safety hazards.
Measures: The Fiat Group will entrust GAC Fiat Auto Co., Ltd. through its authorized distributors to issue notices to the owners affected by this recall, and to replace the affected vehicles with high-strength rear brake calipers for free, unsold vehicles. Will be delivered after the relevant defects have been eliminated.
★ Recalled models: Mercedes-Benz Vito and Mercedes Viano
Starting recall time: June 16, 2011 Number of recalls: 10,816 recalled vehicles Production date: January 1, 2007 to December 31, 2010 Reason for recall: For vehicles equipped with OM646 engine, the air conditioning line bracket may be Three-phase alternator harnesses produce friction that, if not repaired, may result in a short circuit that may cause the vehicle to catch fire.
Remedy: Recall all vehicles that may be affected, check for damage to the circuit, replace if damaged, and install a septum clip.
★ Recalled models: imported and domestic Mazda 3
Import Mazda 3
Recall time: June 16, 2011 Number of recalls: 14,333 imported Mazda 3 and 80,541 domestic Mazda 3
Recall vehicle production date: Import Mazda 3 January 15, 2008 - March 31, 2009 Domestic Mazda 3 February 14, 2008 - February 12, 2010 Reason for recall: Due to the installation of the ground terminal of the front wiper motor Bad, deform the ground terminal and its guides. If you continue to use it in this state, it may cause the ground circuit to fail, causing the front wiper not to work.
Solution: FAW Mazda Automobile Sales Co., Ltd. and Changan Ford Mazda Automobile Co., Ltd. will install a grounding wire on the front wiper motor of the vehicle within the recall scope.
★ Recalled models: Beijing modern name
Recall time: June 15, 2011 Number of recalls: 9,280 vehicles recalled Date of manufacture: August 1, 2010 - October 31, 2010 Reasons for recall: During the running of the vehicle, due to a bad engine water temperature sensor, the engine will be damaged. The warning light and the water temperature indicator indicate inaccurate phenomena. In extreme cases, the engine may be damaged.
Solution: Beijing Hyundai will replace the water temperature sensor for the vehicles in the recall range free of charge to eliminate defects.
★ Recalled models: Chevrolet Le Chi
Recall Time: June 8, 2011 Number of Recalls: 22,457 Recall Vehicles Date of Production: December 20, 2010 - May 11, 2011 Reasons for Recall: Due to supplier's assembly reasons, it may cause the rear wheel shaft nut to open Missing equipment. During the driving process, the components in the rear wheel system move relative to each other. In extreme cases, the components cannot be reliably prevented from being loosened, causing the components to fall off and causing potential safety hazards. The company will conduct free maintenance on the recalled vehicles to eliminate hidden dangers.
Solution: SAIC-GM-Wuling Automobile Lexus Special Service Center will contact the user of the recalled vehicle to arrange free maintenance.
★Recalled models: Jaguar XK/XF
Jaguar XK
Recall time: June 6, 2011 Number of recalls: 2 Jaguar XK and 1550 Jaguar XF
Recall vehicle production date: Jaguar XK August 2009-March 2010 Jaguar XF September 2009-March 2010 Recall Reason: Due to the non-conformity of the anticorrosion coating on the metal surface of the steering booster tubing, corrosion may occur after long-term use. Situation, which in turn leads to steering fluid leakage. If a leakage occurs, it is very likely that the abnormal sound of the steering assistance system will occur. If the steering assistance function is lost, the steering assistance function will be lost. As a result, the vehicle will be steered without steering assistance and there will be vehicle safety hazards. In extreme cases, if the steering fluid comes into contact with a fire or a hot surface, it is likely to cause combustion.
Solution: Jaguar Land Rover Auto Trading (Shanghai) Co., Ltd. will provide free maintenance on all vehicles involved to eliminate hidden troubles. Before the recall work starts, Jaguar Authorized Dealers will, on each occasion of maintenance, take the initiative to implement a free inspection of steering assisted fuel pipes within the scope of recalled vehicles. Car owners who are involved in this recall may also proceed to the nearest Authorized Repair Center on their own. Free inspection to further ensure safe driving before vehicle replacement.
★ Recalled models: imported Citroen C4
Recall time: May 30, 2011 Number of recalls: 6 recalled vehicles Dates of production: July 5, 2006 - July 12, 2006 Reasons for recall: Harness protectors for the connection parts of the tailgate and body cannot guarantee long-term use. After the tailgate is opened multiple times, the harness may be damaged or short-circuited, as well as the safety hazards of various tailgate electrical equipment such as high brake lights, rear wiper, and tailgate lock.
Treatment: PSA Peugeot Citroen (China) Automobile Trading Co., Ltd. will check the vehicles involved in this recall free of charge and replace the tailgate wiring harness if necessary to eliminate hidden dangers.
★ Recalled models: imported Jeep Wrangler
Recall time: Number of recalls on June 1, 2011: 7153 2008-2010 Wrangler and 1156 2011 Wrangler.
Recalling the vehicle production date: 2008-2010 Wrangler 2007 September 1st - July 9th, 2010 2011 Wranglers July 12, 2010 - January 13, 2011 Reasons for recall: Original factory vehicles are Transmission oil temperature overheating may occur under low-speed, high-load operating conditions. Continuing driving under these conditions can cause the transmission oil to boil and come into contact with high-temperature engines or exhaust components, possibly resulting in a fire in the engine compartment without warning.
Approach: For the 2008-2010 Wrangler SUV, Chrysler will take steps to: rearrange the location of the vent, install additional coolers, replace the sealed dipstick, and refresh the free maintenance measures of the transmission control software; With the addition of an auxiliary cooler and rearrangement of the snorkel position of the 2011 Wrangler SUV, the company will adopt a replacement of the sealed oil dipstick and refresh the free maintenance measures of the transmission control software to reduce the burning of the Wrangler vehicle due to the transmission and related systems. risks of.
★ Recalled models: Imported Porsche 997
Porsche 997
Recall time: May 24th, 2011 Number of recalls: 27 vehicles recalled Date of manufacture: 2007 to 2011 Reasons for recall: Due to inadequate tightening force of the central locking mechanism of the wheel, under extreme conditions, between various components in the system Relatively significant movement may occur, which may aggravate the wear of internal components. In the worst case, it may cause parts to fall off, posing a safety hazard.
Solution: Porsche AG will replace the central locking bolts for the vehicles concerned, upgrade them according to the new fastening standards, and add the “Driver Manualâ€. For inventory vehicles, sales will be eliminated after the defects are eliminated.
★ Recalled models: Mondeo - winning
Mondeo - Victory Recall Time: May 11, 2011 Number of recalls: 6,599 vehicles recalled Date of manufacture: February 14, 2011 - April 16, 2011 Reason for recall: Part of air conditioning auxiliary heater power cord may be connected to air filter The bracket interferes, causing the insulation material of the power cord to wear and causing a short circuit, causing the power cord to generate heat and smoke. Changan Ford Mazda Motors will notify the owners affected by this recall through its national authorized Ford brand dealers. The relevant owners will go to the dealers for free inspections and repairs to eliminate potential safety hazards.
Solution: Changan Ford Mazda will conduct free maintenance on all involved vehicles to eliminate hidden troubles.
★ Recalled models: imported Mitsubishi ASX Jin Xuan
Recall time: May 10, 2011 Recall quantity: 5 vehicles recalled Date of manufacture: July 15, 2010.
Reason for recall: Due to the presence of unprimed processing liquid during the installation of the panoramic sunroof glass of the body parts, the vehicle's panoramic sunroof glass may not be firmly bonded to the vehicle body. Continuous use in this state may result in decreased adhesion. In serious cases, there is a risk that the panoramic sunroof glass will fall off, and there will be potential safety hazards.
Measures: Japan's Mitsubishi Motors Corporation will conduct free maintenance on all involved vehicles to eliminate hidden troubles.
★ Recalled models: Volvo
Volvo XC60
Recall time: May 9, 2011 Recall quantity: 942 domestic Volvo S40, 3034 imported Volvo XC60, 84 imported Volvo C70
Recall vehicle production date: October 15, 2010 - January 28, 2011 Reason for recall: The vehicle headlamp cleaning pump may interfere with the signal of the cleaning fluid level sensor, when the cleaning fluid level is lower than the set value, The driver cannot obtain the low level of the cleaning fluid from the DIM (Driver Information System) and add the cleaning fluid in time.
Solution: Changan Ford Mazda and Volvo Car Sales (Shanghai) Co., Ltd. will notify the relevant customers through authorized dealers to the nearest authorized service center to perform free inspection and repair of the vehicles to eliminate hidden dangers.
★ Recall models: 2011 imported Mercedes-Benz S-class
Recall time: April 25th, 2011 Recall quantity: 4 recalled vehicle production date: July 8, 2010 - July 21, 2011 Recall reason: The vulcanization process of the pulley shock absorber in the engine compartment is produced by the supplier. There may be deviations, resulting in insufficient adhesion between the pulley shock absorber and the inner shock absorber ring, which may cause the internal shock absorber ring and the pulley shock absorber to disengage. This may cause safety hazards. If the vehicle is being opened and repaired, relevant personnel Parts that may have been loosened wounded.
Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will conduct free maintenance on all involved vehicles and replace affected parts if necessary to eliminate hidden troubles.
★Recall model: Toyota WISH
Toyota WISH
Recall time: March 28, 2011 Number of recalls: 20 vehicles recalled Date of manufacture: January 01, 2010 - February 26, 2010 Reasons for recall: Displacement of the internal parts of the switch, resulting in frequent use of switch keys A small number of vehicles may produce poor operation or poor lift. If you continue to use it under this condition, it may cause the switch to melt and affect the driving safety.
Solution: Beijing Rihuasheng Automobile Trading Co., Ltd. will notify the relevant known customers to contact the nearest Taifa brand dealer immediately and reserve free replacement parts.
★ Recalled models: MG TF sports car
Recall time: March 16, 2011 Recall quantity: 181 vehicles recalled Date of manufacture: October 2007 - March 2009 Recall Reason: Due to corrosion of the front lower arm rivet head, if it continues to be used, it may appear in extreme cases. As the rivets fall off, the vehicle cannot travel normally and there is a safety hazard.
Measures: SAIC Motor Passenger Vehicles Branch will conduct free maintenance on the recalled vehicles to eliminate potential safety hazards.
★ Recalled models: Lexus RX300/350
Recall time: March 23, 2011 Recall quantity: 5,022 vehicles recalled Date of manufacture: February 2003 - July 2006 Reason for recall: When carrying out the driver's side carpet press work, if it is installed improperly, it may cause carpet pressure plate Tilting toward the accelerator pedal and touching the pedal arm may cause the accelerator pedal to fail to return, posing a safety hazard.
Approach: Toyota Motor (China) Investment Co., Ltd. will recall the vehicle affected by the defect and replace the original carpet press plate with an improved shape product.
★ Recalled models: New Regal and New Lacrosse
Recall time: February 28, 2011 Number of recalls: 133,074 new Regal 2.0L, 2.4L, and 99,857 new Lacrosse 2.4L
Recall vehicle production date: New Regal September 18, 2008 - October 14, 2010 Xinjun Yue April 20, 2009 - October 14, 2010 Reason for recall: Vehicle engine fuel pipe may work under extreme conditions. Released, causing a leak of fuel, causing the vehicle to stall or fail to start. If there is an external open flame, there is a hidden danger of fire.
Measures: Shanghai General Motors will take measures to replace fuel pipes in the recalled vehicles to eliminate hidden dangers.
★Recall models: Suzuki 2010 Vitra
Super Vitra Recall Time: February 28, 2011 Recalls: 4007 Recall Vehicles Production Date: June 2, 2008 - October 20, 2010 Reason for Recall: Built-in drive belt tensioner in vehicle engine assist system The spring has defects and may be damaged. As a result, the tensioning force of the belt cannot be automatically adjusted, the tensioning force is weakened, and abnormal noise may be generated. If it continues to be used, belt slippage may occur, resulting in malfunction of the power steering pump, the generator, and the cooling water pump. The steering becomes heavy, the battery warning light is on, and the water temperature gauge is high temperature warning. In severe cases, the steering assistance will fail and there is a safety hazard.
Solution: Suzuki (China) Investment Co., Ltd. will repair the vehicles within the recall scope and replace the tensioner with improved parts for free to eliminate hidden dangers. For inventory vehicles, sales will be eliminated after eliminating defects.
★ Recalled models: Guangzhou Automobile Honda Fit and Feng Fan
Recall time: February 25, 2011 Number of recalls: 40,847 Fits and 115,455 front-recovery vehicles Recall date: Fit January 7, 2008 - January 29, 2010 Feng Fan April 29, 2008 - January 2010 Reason for recall on the 26th: The no-load spring on the vehicle's engine variable valve timing mechanism may cause fatigue fracture due to design reasons, causing engine abnormal noise and flameout, and it can no longer be started.
Treatment measures: Guangzhou Automobile Honda will provide free-wheeling spring components for free vehicle replacement measures.
★ Recalled models: Saab 2011 9-3 sedan
Recall time: February 18, 2011 Recall quantity: 4,400 vehicles recalled Date of manufacture: June 2010-October 2010 Reason for recall: Some fuel pump components may be out of specification and may get stuck, thus preventing the flow of fuel. Engine and cause the vehicle to stall.
Solution: The dealer will replace the defective oil pump for the owner free of charge.
★ Recalled models: Cadillac CTS
Recall time: February 16, 2011 Number of recalls: 7,939 vehicles recalled Date of manufacture: March 23, 2004 - June 26, 2007 Cause of recall: The sensor pad of the front passenger seat sensor system may occur during use. Distorted or folded, causing a malfunction of the sensing circuit and causing the airbag lamp to light up.
Treatment measures: After the recall, measures will be taken to replace the co-pilot seat sensing pad on the problem vehicle to eliminate hidden dangers.
★Recalled models: Dongfeng Peugeot 408
Recall time: January 29, 2011 Recall quantity: 26,583 vehicles recalled Date of manufacture: November 14, 2009 - November 16, 2010 Cause of recall: As the positive cable may come out of the fixed card on the battery holder, causing The positive cable corrugated pipe is in contact with the wire harness bracket. In extreme cases, the positive cable insulation layer may be worn and lead to short-circuit of the line. This may cause safety hazards.
Approach: Shenlong Automobile Co., Ltd. will provide free maintenance for related vehicles.
★ Recalled models: Dongfeng Peugeot 307
Dongfeng Peugeot 307
Recall time: January 29, 2011 Number of recalls: 11,116 vehicles recalled Date of manufacture: October 11, 2010 - December 2, 2010 Reason for recall: Due to the thicker tear line of the steering wheel airbag cover, when the steering wheel When the airbag detonates, the normal deployment of the airbag may be affected.
Approach: Shenlong Automobile Co., Ltd. will provide free maintenance for related vehicles.
★Recall models: Land Rover Defenders
Land Rover Defender Recall Time: January 22, 2011 Number of recalls: 373 recalled vehicles Production date: October 5, 2007 - November 4, 2010 Reason for recall: As the output shaft of the splitter does not meet specifications, it may cause The oil leaks between the output shaft of the actuator and the drive flange. Once the oil leaks from the middle of the drive flange, it will flow into the parking brake drum, which may cause the parking brake shoe to become contaminated. If it is serious, it will cause the parking brake to fail and there are safety hazards.
Approach: Jaguar Land Rover China stated that it has not received any complaints from domestic consumers yet, but for safety reasons, the company will inspect vehicles within the scope of the recall to remove oil from related parts while driving the orchids Add sealant on the keys to avoid lubricating oil and eliminate hidden troubles. For inventory vehicles, sales will be eliminated after eliminating defects.
★ Recalled models: SAIC-GM-Wuling Hongguang
Recall time: January 15, 2011 Number of recalls: 60,75 recalled vehicles Production date: July 22, 2010 - December 20, 2010 Reason for recall: Due to the fastening bolts of the middle row seats and the fuel tanks Over-accumulation of the dimensions may cause the fastening bolts to interfere with the upper surface of the fuel tank, causing wear of the fuel tank's interference area. In extreme cases, slight oil leakage may occur at the interference area, which may affect vehicle safety.
Solution: SAIC-GM-Wuling Automobile Co., Ltd. will conduct free maintenance on the recalled vehicles and replace the improved fuel tanks to eliminate potential safety hazards.
★ Recalled models: Volvo XC60
Recall time: January 4, 2011 Recall quantity: 135 vehicles recalled Date of manufacture: February 04, 2009 - October 25, 2010 Reason for recall: Position limiter of electric seat in front of vehicle is not installed properly, causing When the seat moves, it exceeds the expected maximum limit, which may increase the risk of injury to the driver and the front seat passenger in a collision accident. This poses a safety hazard.
Measures: Volvo Car Sales (Shanghai) Co., Ltd. authorizes the 4S store to check all vehicle recalls. If necessary, correct the front seat limiter to eliminate hidden dangers.
(ranked by number of recalls)
★ Recalled models: Dongfeng Nissan Qijun
Starting recall time: December 9, 2011 Number of recalls: 1,098 recalled vehicles Date of manufacture: October 9, 2010 - December 20, 2010 Recall Reason: Due to reasons of vehicle power steering to electronic controller module suppliers, After a long period of use, the terminal soldering joints may come off, causing heavy steering and potential safety hazards.
Measures: Dongfeng Motor Co., Ltd. will replace the vehicles in the recall range with qualified power steering electronic controller modules to eliminate hidden troubles.
★ Recalled models: Dongfeng Nissan
Starting recall time: December 9, 2011 Number of recalls: 2,509 vehicles recalled Date of manufacture: September 24, 2010 - December 20, 2010 Reason for recall: Due to reasons of vehicle power steering to electronic controller module suppliers, After a long period of use, the terminal soldering joints may come off, causing heavy steering and potential safety hazards.
Measures: Dongfeng Motor Co., Ltd. will replace the vehicles in the recall range with qualified power steering electronic controller modules to eliminate hidden troubles.
★ Recalled models: Lexus RX300
Starting recall time: December 1, 2011 Recall quantity: 426 vehicles recalled Date of manufacture: June 1, 2004 - March 31, 2005 Reason for recall: Due to the insufficient amount of adhesive applied between pulley outer wheel and anti-vibration rubber. Caused by the use of peeling between the outer wheel and the rubber during use, the pulley idling, resulting in abnormal sound, charging warning light lit. Under extreme circumstances, there may be a possibility that the power steering pump belt is disengaged, resulting in a sudden increase in the steering operation force, posing a safety hazard.
Measure: Toyota China will inform the user by way of user letter, and ask the user to send the vehicle to the nearest Lexus dealership. After confirming with professional maintenance technicians, replace the crankshaft pulley of the vehicle.
★ Recalled models: BMW 5 Series GT, 7 Series, X5, X6
Starting recall time: November 21, 2011 Number of recalls: 2,862 vehicles recalled Date of manufacture: November 2007 - February 2011 Reasons for recall: The vehicle is equipped with 8-cylinder or 12-cylinder engines. The electronic water pump installed on the engine may be Because the circuit board is damaged and does not work, an individual vehicle may have a circuit board overheating, and when it is serious, it may cause the circuit board to burn, resulting in a safety hazard.
Solution: BMW authorized dealers will contact the relevant customers to replace the electronic water pump for customers free of charge to eliminate the hidden troubles.
★ Recalled models: Rolls-Royce Gust
Starting recall time: November 21, 2011 Number of recalls: 336 vehicles recalled Date of manufacture: May 2009 - March 2011 Cause of recall: The vehicle is equipped with an 8-cylinder or 12-cylinder engine. The electronic water pump installed on the engine may be Because the circuit board is damaged and does not work, an individual vehicle may have a circuit board overheating, and when it is serious, it may cause the circuit board to burn, resulting in a safety hazard.
Solution: Rolls-Royce authorized dealers will contact the relevant customers to replace the electronic water pump for customers free of charge to eliminate the hidden troubles.
★ Recalled models: Infiniti G37
Starting recall time: November 17, 2011 Recall quantity: 4 vehicles recalled Date of manufacture: July 2, 2011 - August 29, 2011 Recall reason: When changing the front door electric window lifter switch computer program, write The procedure of entering the computer is not appropriate, resulting in the anti-pinch function of the electric window lift switch. The load of starting the return force of the glass is larger than the design value. In some cases, the human body may be caught by the window glass and there is a safety hazard.
Treatment measures: Nissan (China) Investment Co., Ltd. will replace the glass lift switches of the left and right electric windows with improved parts by the relevant authorized dealers for the vehicles involved in the defects.
★ Recalled models: Maserati GTS sports car
Starting recall time: September 30, 2011 Number of recalls: 6 vehicles recalled Date of manufacture: August 31, 2010 - November 19, 2010 Reason for recall: Vehicles are repeatedly high due to non-compliant transmissions In the load movement mode, the gearbox may be damaged, eventually causing internal breakage of the gearbox, and the rear wheels of the vehicle are locked, causing potential safety hazards.
Approach: Ferrari Maserati Automotive International (Shanghai) Co., Ltd. will replace the vehicle in the recalled area with a new one to eliminate this defect.
★ Recalled models: Subaru Legacy and Outback
Starting recall time: September 28, 2011 Number of recalls: 36728 Vehicles recalled Date of manufacture: November 4, 2009 - May 17, 2011 Cause of recall: Defects in the front wiper motor of the car Disposal method: Subaru China will Replace the front wiper motor cover for the recalled vehicle to eliminate defects.
★ Recalled models: Guangzhou Automobile Honda Fit
Starting recall time: September 15, 2011 Number of recalls: 145,542 vehicles recalled Date of manufacture: August 8, 2005 - December 8, 2007 Reasons for recall: When the vehicle's driver's seat side power window switch is exposed to exotic silicone When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Guangzhou Automobile Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Guangzhou Automobile Honda Sidi
Starting recall time: September 15, 2011 Number of recalls: 81,547 vehicles recalled Date of manufacture: August 1, 2005 - August 22, 2007 Reason for recall: When the vehicle's driver's seat side power window switch receives foreign silicon When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Guangzhou Automobile Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Dongfeng Honda CR-V
Starting recall time: September 15, 2011 Number of recalls: 28,677 vehicles recalled Date of manufacture: January 11, 2006 - March 5, 2007 Reason for recall: When the vehicle's driver's seat side power window switch receives foreign silicon When the solvent is invaded, if it continues to be used, the switch contact will be abnormally worn and the powder will accumulate. When it reaches a certain level, it may cause short circuit and heat, which may cause the switch to be damaged. In extreme cases, it may cause partial burn of the part.
Solution: Dongfeng Honda will replace the new driver's seat side power window switch for vehicles with potential safety hazards free of charge to eliminate hidden dangers.
★ Recalled models: Toyota Yaris
Starting recall time: September 13, 2011 Number of recalls: 10,587 vehicles recalled Date of manufacture: April 12, 2010 - January 4, 2011 Cause of recall: Because the left side A-pillar interior is improperly installed, when the side curtain is in When the vehicle expands during a collision, the interior parts may come off and damage the occupant on the left seat.
Solution: Toyota China will check the installation of the interior, and if necessary repair it.
★ Recalled models: imported Mercedes-Benz ML
Mercedes-Benz ML Class Recall Time: September 13, 2011 Number of recalls: 712 recalled vehicles Date of manufacture: August 1999 - June 2004 Reasons for recall: Plunger movement in vehicle brake light switch, affecting cruise control The control releases the signal transmission and the driver cannot release the cruise control when the brake pedal is lightly pressed. When a defect occurs, the driver can deactivate the cruise state by pressing the brake pedal deeply or using the cruise control lever.
Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will conduct free maintenance on all involved vehicles and replace brake light switches to eliminate hidden troubles.
★Recalled models: Dongfeng Peugeot 408
Starting recall time: September 9, 2011 Number of recalls: 25,792 recalled vehicles Production date: January 18, 2010 - August 17, 2011 Reason for recall: Due to poor stability of engine software's low speed adaptation, the vehicle is starting or There is a flameout at low speeds.
Solution: Shenlong Motor Co., Ltd. will upgrade the vehicle software within the recall scope free of charge to eliminate potential faults.
★ Recall models: Maserati President Series Sedan and Maserati GT Sports Car
President Maserati began recalling: September 6, 2011 Number of recalls: 37 imported Maserati president series and 19 Maserati GT sports car recalled vehicles Production date: July 3, 2008 - September 30, 2008 Recall reason: Due to machinery Processing does not conform to the specifications, resulting in the inner tie rod size does not meet specifications, if you continue to use, when encountering complex road conditions, it may lead to failure of the tie rod, in severe cases will break, leading to the driver can not control the car.
Solution: Maserati will upgrade the recalled imported sedan sports car to eliminate hidden troubles.
★Recall models: FAW Toyota Corolla EX
Starting recall time: August 16, 2011 Recall quantity: 33,809 vehicles recalled Date of manufacture: October 23, 2010 - January 29, 2011 Recall reason: Accumulated static electricity due to insufficient electrostatic protection of the vehicle's engine casing It may affect the normal operation of the engine of the engine and make the engine unable to start. Under extreme circumstances, it may cause the engine to stall.
Approach: Tianjin FAW Toyota Motors Toyota Motor Co., Ltd. will install wiring harnesses between the engine casing and the vehicle body to eliminate the hidden dangers caused by static electricity.
★ Recalled models: Guangzhou Automobile Honda Accord
Starting recall time: August 8, 2011 Number of recalls: 605,025 Vehicles Recalled Date of manufacture: July 20, 2004 - October 8, 2009 Reason for recall: The vehicle is in a poor condition where similar wheels are stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Guangzhou Automobile Honda Automobile Co., Ltd. will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Guangzhou Automobile Honda Odyssey
Starting recall time: August 8, 2011 Number of recalls: 151,489 vehicles recalled Date of manufacture: July 7, 2004 - September 2, 2009 Reasons for recall: Vehicles are in poor condition where similar wheels get stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Guangzhou Automobile Honda Automobile Co., Ltd. will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Dongfeng Honda Think Platinum Core
Starting recall time: August 8, 2011 Number of recalls: 4001 vehicles recalled Date of manufacture: August 6, 2009 - November 24, 2009 Reason for recall: Vehicles are in poor condition where similar wheels are stuck in snow or mud. In the environment, after moving the vehicle forward and backward and repeatedly switching between D block and R block, when the engine is in a high speed state and then hung from the N block into the R block, the bearings in the automatic transmission may have been subjected to A large load impacts and suffers an abnormal sound. In extreme cases, the engine may stall or fail to start, or the parking lock function of the P gear may fail.
Solution: Dongfeng Honda Automobile Co., Ltd will upgrade the vehicle electronic control unit (ECU) software within the target area free of charge to eliminate hidden dangers.
★ Recalled models: Dodge Coolway
Starting recall time: August 1, 2011 Number of recalls: 1,708 vehicles recalled Date of manufacture: August 3, 2009 - January 23, 2010 Reason for recall: Due to deviations in the manufacturing process of a certain batch of anti-theft modules, vehicles Driving on a bumpy road or due to a driver's misoperation may cause the ignition key to go from an “On†position to an “Accessory†position while driving, which may cause the engine to stall and the vehicle to lose control.
Approach: Chrysler Group LLC will inspect all vehicles that may have this hidden danger and replace relevant parts for consumers free of charge.
★ Recalled models: Fiat Bo Yue
Starting recall time: July 6, 2011 Number of recalls: 1223 vehicles recalled Date of manufacture: March 20, 2008 - November 8, 2010 Reason for recall: Due to the long time fixed in the transportation during the transportation On the tool, the stress concentration of the brake caliper is caused, which may cause the rear brake caliper frame of the vehicle to break with the connection arm of the float clamp, which may cause safety hazards.
Measures: The Fiat Group will entrust GAC Fiat Auto Co., Ltd. through its authorized distributors to issue notices to the owners affected by this recall, and to replace the affected vehicles with high-strength rear brake calipers for free, unsold vehicles. Will be delivered after the relevant defects have been eliminated.
★ Recalled models: Mercedes-Benz Vito and Mercedes Viano
Starting recall time: June 16, 2011 Number of recalls: 10,816 recalled vehicles Production date: January 1, 2007 to December 31, 2010 Reason for recall: For vehicles equipped with OM646 engine, the air conditioning line bracket may be Three-phase alternator harnesses produce friction that, if not repaired, may result in a short circuit that may cause the vehicle to catch fire.
Remedy: Recall all vehicles that may be affected, check for damage to the circuit, replace if damaged, and install a septum clip.
★ Recalled models: imported and domestic Mazda 3
Import Mazda 3
Recall time: June 16, 2011 Number of recalls: 14,333 imported Mazda 3 and 80,541 domestic Mazda 3
Recall vehicle production date: Import Mazda 3 January 15, 2008 - March 31, 2009 Domestic Mazda 3 February 14, 2008 - February 12, 2010 Reason for recall: Due to the installation of the ground terminal of the front wiper motor Bad, deform the ground terminal and its guides. If you continue to use it in this state, it may cause the ground circuit to fail, causing the front wiper not to work.
Solution: FAW Mazda Automobile Sales Co., Ltd. and Changan Ford Mazda Automobile Co., Ltd. will install a grounding wire on the front wiper motor of the vehicle within the recall scope.
★ Recalled models: Beijing modern name
Recall time: June 15, 2011 Number of recalls: 9,280 vehicles recalled Date of manufacture: August 1, 2010 - October 31, 2010 Reasons for recall: During the running of the vehicle, due to a bad engine water temperature sensor, the engine will be damaged. The warning light and the water temperature indicator indicate inaccurate phenomena. In extreme cases, the engine may be damaged.
Solution: Beijing Hyundai will replace the water temperature sensor for the vehicles in the recall range free of charge to eliminate defects.
★ Recalled models: Chevrolet Le Chi
Recall Time: June 8, 2011 Number of Recalls: 22,457 Recall Vehicles Date of Production: December 20, 2010 - May 11, 2011 Reasons for Recall: Due to supplier's assembly reasons, it may cause the rear wheel shaft nut to open Missing equipment. During the driving process, the components in the rear wheel system move relative to each other. In extreme cases, the components cannot be reliably prevented from being loosened, causing the components to fall off and causing potential safety hazards. The company will conduct free maintenance on the recalled vehicles to eliminate hidden dangers.
Solution: SAIC-GM-Wuling Automobile Lexus Special Service Center will contact the user of the recalled vehicle to arrange free maintenance.
★Recalled models: Jaguar XK/XF
Jaguar XK
Recall time: June 6, 2011 Number of recalls: 2 Jaguar XK and 1550 Jaguar XF
Recall vehicle production date: Jaguar XK August 2009-March 2010 Jaguar XF September 2009-March 2010 Recall Reason: Due to the non-conformity of the anticorrosion coating on the metal surface of the steering booster tubing, corrosion may occur after long-term use. Situation, which in turn leads to steering fluid leakage. If a leakage occurs, it is very likely that the abnormal sound of the steering assistance system will occur. If the steering assistance function is lost, the steering assistance function will be lost. As a result, the vehicle will be steered without steering assistance and there will be vehicle safety hazards. In extreme cases, if the steering fluid comes into contact with a fire or a hot surface, it is likely to cause combustion.
Solution: Jaguar Land Rover Auto Trading (Shanghai) Co., Ltd. will provide free maintenance on all vehicles involved to eliminate hidden troubles. Before the recall work starts, Jaguar Authorized Dealers will, on each occasion of maintenance, take the initiative to implement a free inspection of steering assisted fuel pipes within the scope of recalled vehicles. Car owners who are involved in this recall may also proceed to the nearest Authorized Repair Center on their own. Free inspection to further ensure safe driving before vehicle replacement.
★ Recalled models: imported Citroen C4
Recall time: May 30, 2011 Number of recalls: 6 recalled vehicles Dates of production: July 5, 2006 - July 12, 2006 Reasons for recall: Harness protectors for the connection parts of the tailgate and body cannot guarantee long-term use. After the tailgate is opened multiple times, the harness may be damaged or short-circuited, as well as the safety hazards of various tailgate electrical equipment such as high brake lights, rear wiper, and tailgate lock.
Treatment: PSA Peugeot Citroen (China) Automobile Trading Co., Ltd. will check the vehicles involved in this recall free of charge and replace the tailgate wiring harness if necessary to eliminate hidden dangers.
★ Recalled models: imported Jeep Wrangler
Recall time: Number of recalls on June 1, 2011: 7153 2008-2010 Wrangler and 1156 2011 Wrangler.
Recalling the vehicle production date: 2008-2010 Wrangler 2007 September 1st - July 9th, 2010 2011 Wranglers July 12, 2010 - January 13, 2011 Reasons for recall: Original factory vehicles are Transmission oil temperature overheating may occur under low-speed, high-load operating conditions. Continuing driving under these conditions can cause the transmission oil to boil and come into contact with high-temperature engines or exhaust components, possibly resulting in a fire in the engine compartment without warning.
Approach: For the 2008-2010 Wrangler SUV, Chrysler will take steps to: rearrange the location of the vent, install additional coolers, replace the sealed dipstick, and refresh the free maintenance measures of the transmission control software; With the addition of an auxiliary cooler and rearrangement of the snorkel position of the 2011 Wrangler SUV, the company will adopt a replacement of the sealed oil dipstick and refresh the free maintenance measures of the transmission control software to reduce the burning of the Wrangler vehicle due to the transmission and related systems. risks of.
★ Recalled models: Imported Porsche 997
Porsche 997
Recall time: May 24th, 2011 Number of recalls: 27 vehicles recalled Date of manufacture: 2007 to 2011 Reasons for recall: Due to inadequate tightening force of the central locking mechanism of the wheel, under extreme conditions, between various components in the system Relatively significant movement may occur, which may aggravate the wear of internal components. In the worst case, it may cause parts to fall off, posing a safety hazard.
Solution: Porsche AG will replace the central locking bolts for the vehicles concerned, upgrade them according to the new fastening standards, and add the “Driver Manualâ€. For inventory vehicles, sales will be eliminated after the defects are eliminated.
★ Recalled models: Mondeo - winning
Mondeo - Victory Recall Time: May 11, 2011 Number of recalls: 6,599 vehicles recalled Date of manufacture: February 14, 2011 - April 16, 2011 Reason for recall: Part of air conditioning auxiliary heater power cord may be connected to air filter The bracket interferes, causing the insulation material of the power cord to wear and causing a short circuit, causing the power cord to generate heat and smoke. Changan Ford Mazda Motors will notify the owners affected by this recall through its national authorized Ford brand dealers. The relevant owners will go to the dealers for free inspections and repairs to eliminate potential safety hazards.
Solution: Changan Ford Mazda will conduct free maintenance on all involved vehicles to eliminate hidden troubles.
★ Recalled models: imported Mitsubishi ASX Jin Xuan
Recall time: May 10, 2011 Recall quantity: 5 vehicles recalled Date of manufacture: July 15, 2010.
Reason for recall: Due to the presence of unprimed processing liquid during the installation of the panoramic sunroof glass of the body parts, the vehicle's panoramic sunroof glass may not be firmly bonded to the vehicle body. Continuous use in this state may result in decreased adhesion. In serious cases, there is a risk that the panoramic sunroof glass will fall off, and there will be potential safety hazards.
Measures: Japan's Mitsubishi Motors Corporation will conduct free maintenance on all involved vehicles to eliminate hidden troubles.
★ Recalled models: Volvo
.jpg)
Volvo XC60
Recall time: May 9, 2011 Recall quantity: 942 domestic Volvo S40, 3034 imported Volvo XC60, 84 imported Volvo C70
Recall vehicle production date: October 15, 2010 - January 28, 2011 Reason for recall: The vehicle headlamp cleaning pump may interfere with the signal of the cleaning fluid level sensor, when the cleaning fluid level is lower than the set value, The driver cannot obtain the low level of the cleaning fluid from the DIM (Driver Information System) and add the cleaning fluid in time.
Solution: Changan Ford Mazda and Volvo Car Sales (Shanghai) Co., Ltd. will notify the relevant customers through authorized dealers to the nearest authorized service center to perform free inspection and repair of the vehicles to eliminate hidden dangers.
★ Recall models: 2011 imported Mercedes-Benz S-class
Recall time: April 25th, 2011 Recall quantity: 4 recalled vehicle production date: July 8, 2010 - July 21, 2011 Recall reason: The vulcanization process of the pulley shock absorber in the engine compartment is produced by the supplier. There may be deviations, resulting in insufficient adhesion between the pulley shock absorber and the inner shock absorber ring, which may cause the internal shock absorber ring and the pulley shock absorber to disengage. This may cause safety hazards. If the vehicle is being opened and repaired, relevant personnel Parts that may have been loosened wounded.
Solution: Mercedes-Benz (China) Automobile Sales Co., Ltd. will conduct free maintenance on all involved vehicles and replace affected parts if necessary to eliminate hidden troubles.
★Recall model: Toyota WISH
Toyota WISH
Recall time: March 28, 2011 Number of recalls: 20 vehicles recalled Date of manufacture: January 01, 2010 - February 26, 2010 Reasons for recall: Displacement of the internal parts of the switch, resulting in frequent use of switch keys A small number of vehicles may produce poor operation or poor lift. If you continue to use it under this condition, it may cause the switch to melt and affect the driving safety.
Solution: Beijing Rihuasheng Automobile Trading Co., Ltd. will notify the relevant known customers to contact the nearest Taifa brand dealer immediately and reserve free replacement parts.
★ Recalled models: MG TF sports car
Recall time: March 16, 2011 Recall quantity: 181 vehicles recalled Date of manufacture: October 2007 - March 2009 Recall Reason: Due to corrosion of the front lower arm rivet head, if it continues to be used, it may appear in extreme cases. As the rivets fall off, the vehicle cannot travel normally and there is a safety hazard.
Measures: SAIC Motor Passenger Vehicles Branch will conduct free maintenance on the recalled vehicles to eliminate potential safety hazards.
★ Recalled models: Lexus RX300/350
Recall time: March 23, 2011 Recall quantity: 5,022 vehicles recalled Date of manufacture: February 2003 - July 2006 Reason for recall: When carrying out the driver's side carpet press work, if it is installed improperly, it may cause carpet pressure plate Tilting toward the accelerator pedal and touching the pedal arm may cause the accelerator pedal to fail to return, posing a safety hazard.
Approach: Toyota Motor (China) Investment Co., Ltd. will recall the vehicle affected by the defect and replace the original carpet press plate with an improved shape product.
★ Recalled models: New Regal and New Lacrosse
Recall time: February 28, 2011 Number of recalls: 133,074 new Regal 2.0L, 2.4L, and 99,857 new Lacrosse 2.4L
Recall vehicle production date: New Regal September 18, 2008 - October 14, 2010 Xinjun Yue April 20, 2009 - October 14, 2010 Reason for recall: Vehicle engine fuel pipe may work under extreme conditions. Released, causing a leak of fuel, causing the vehicle to stall or fail to start. If there is an external open flame, there is a hidden danger of fire.
Measures: Shanghai General Motors will take measures to replace fuel pipes in the recalled vehicles to eliminate hidden dangers.
★Recall models: Suzuki 2010 Vitra
Super Vitra Recall Time: February 28, 2011 Recalls: 4007 Recall Vehicles Production Date: June 2, 2008 - October 20, 2010 Reason for Recall: Built-in drive belt tensioner in vehicle engine assist system The spring has defects and may be damaged. As a result, the tensioning force of the belt cannot be automatically adjusted, the tensioning force is weakened, and abnormal noise may be generated. If it continues to be used, belt slippage may occur, resulting in malfunction of the power steering pump, the generator, and the cooling water pump. The steering becomes heavy, the battery warning light is on, and the water temperature gauge is high temperature warning. In severe cases, the steering assistance will fail and there is a safety hazard.
Solution: Suzuki (China) Investment Co., Ltd. will repair the vehicles within the recall scope and replace the tensioner with improved parts for free to eliminate hidden dangers. For inventory vehicles, sales will be eliminated after eliminating defects.
★ Recalled models: Guangzhou Automobile Honda Fit and Feng Fan
Recall time: February 25, 2011 Number of recalls: 40,847 Fits and 115,455 front-recovery vehicles Recall date: Fit January 7, 2008 - January 29, 2010 Feng Fan April 29, 2008 - January 2010 Reason for recall on the 26th: The no-load spring on the vehicle's engine variable valve timing mechanism may cause fatigue fracture due to design reasons, causing engine abnormal noise and flameout, and it can no longer be started.
Treatment measures: Guangzhou Automobile Honda will provide free-wheeling spring components for free vehicle replacement measures.
★ Recalled models: Saab 2011 9-3 sedan
Recall time: February 18, 2011 Recall quantity: 4,400 vehicles recalled Date of manufacture: June 2010-October 2010 Reason for recall: Some fuel pump components may be out of specification and may get stuck, thus preventing the flow of fuel. Engine and cause the vehicle to stall.
Solution: The dealer will replace the defective oil pump for the owner free of charge.
★ Recalled models: Cadillac CTS
Recall time: February 16, 2011 Number of recalls: 7,939 vehicles recalled Date of manufacture: March 23, 2004 - June 26, 2007 Cause of recall: The sensor pad of the front passenger seat sensor system may occur during use. Distorted or folded, causing a malfunction of the sensing circuit and causing the airbag lamp to light up.
Treatment measures: After the recall, measures will be taken to replace the co-pilot seat sensing pad on the problem vehicle to eliminate hidden dangers.
★Recalled models: Dongfeng Peugeot 408
Recall time: January 29, 2011 Recall quantity: 26,583 vehicles recalled Date of manufacture: November 14, 2009 - November 16, 2010 Cause of recall: As the positive cable may come out of the fixed card on the battery holder, causing The positive cable corrugated pipe is in contact with the wire harness bracket. In extreme cases, the positive cable insulation layer may be worn and lead to short-circuit of the line. This may cause safety hazards.
Approach: Shenlong Automobile Co., Ltd. will provide free maintenance for related vehicles.
★ Recalled models: Dongfeng Peugeot 307
Dongfeng Peugeot 307
Recall time: January 29, 2011 Number of recalls: 11,116 vehicles recalled Date of manufacture: October 11, 2010 - December 2, 2010 Reason for recall: Due to the thicker tear line of the steering wheel airbag cover, when the steering wheel When the airbag detonates, the normal deployment of the airbag may be affected.
Approach: Shenlong Automobile Co., Ltd. will provide free maintenance for related vehicles.
★Recall models: Land Rover Defenders
Land Rover Defender Recall Time: January 22, 2011 Number of recalls: 373 recalled vehicles Production date: October 5, 2007 - November 4, 2010 Reason for recall: As the output shaft of the splitter does not meet specifications, it may cause The oil leaks between the output shaft of the actuator and the drive flange. Once the oil leaks from the middle of the drive flange, it will flow into the parking brake drum, which may cause the parking brake shoe to become contaminated. If it is serious, it will cause the parking brake to fail and there are safety hazards.
Approach: Jaguar Land Rover China stated that it has not received any complaints from domestic consumers yet, but for safety reasons, the company will inspect vehicles within the scope of the recall to remove oil from related parts while driving the orchids Add sealant on the keys to avoid lubricating oil and eliminate hidden troubles. For inventory vehicles, sales will be eliminated after eliminating defects.
★ Recalled models: SAIC-GM-Wuling Hongguang
Recall time: January 15, 2011 Number of recalls: 60,75 recalled vehicles Production date: July 22, 2010 - December 20, 2010 Reason for recall: Due to the fastening bolts of the middle row seats and the fuel tanks Over-accumulation of the dimensions may cause the fastening bolts to interfere with the upper surface of the fuel tank, causing wear of the fuel tank's interference area. In extreme cases, slight oil leakage may occur at the interference area, which may affect vehicle safety.
Solution: SAIC-GM-Wuling Automobile Co., Ltd. will conduct free maintenance on the recalled vehicles and replace the improved fuel tanks to eliminate potential safety hazards.
★ Recalled models: Volvo XC60
Recall time: January 4, 2011 Recall quantity: 135 vehicles recalled Date of manufacture: February 04, 2009 - October 25, 2010 Reason for recall: Position limiter of electric seat in front of vehicle is not installed properly, causing When the seat moves, it exceeds the expected maximum limit, which may increase the risk of injury to the driver and the front seat passenger in a collision accident. This poses a safety hazard.
Measures: Volvo Car Sales (Shanghai) Co., Ltd. authorizes the 4S store to check all vehicle recalls. If necessary, correct the front seat limiter to eliminate hidden dangers.
Case & Box,Tattoo Grips ,Tattoo Supplies Equipment ,Professional Tattoo Gun
Centrifugal Pump Co., Ltd.Skin Beauty Equipment , http://www.royalinktattoosupplies.com