Plate Bending Machine With ISO & CE Certificate

Plate Bending Machine With ISO & CE Certificate

Structure:

-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.

Power Pack Unit:

-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.

Other Important Features:

-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.

-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.

Standard Accessories:

-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement


  Plate Bending Machine With ISO & CE Certificate

Structure:

-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.

Power Pack Unit:

-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.

Other Important Features:

-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.

-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.

Standard Accessories:

-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement


 

With long years of experience in the refrigeration industry, we are able to manufacture, wholesale, export, and provide service for high quality range of Cold Storage Room, Cold Storage , Walk In Cold Rooms and Cold Room Warehouse. It is easily maintained at low cost. For excellent cooling efficiency, our many years of cold room refrigeration experience will help us design a economic refrigeration system according to your product, no more and no less. Our world famous brand refrigeration accessories guarantee long use cycle.

Cold storage room solutions includes seafood and meat Freezer Room , dairy and ice cream Blast Freezer , fruits and vegetables cold room, pharmaceutical and chemicals cold room, Commercial Cold Room, ripening room and flower cold storage room. These cold storage rooms are very efficient to use with supreme strength and excellent functionality. We can do any sizes and variations what our customer needs.

If you need a functional, dependable and durable cold storage room, always go for the established quality brands. Contact us now for more information.

Cold Storage Room

Cold Storage,Walk In Cold Rooms,Cold Room Warehouse,Commercial Cold Room

Shandong Atlas Refrigeration Technology Co.,Ltd. , https://www.atlascoldroom.com