Application:
QVC Series Pneumatic vacuum loading machine is used in automatic material for Tablet Press machine, Pulverizing machine, capsule filling machine, Screen machine, Packing machine, Pulverizing machine, Screen machine and Mixing machine etc. It doesn't need any mechanical vacuum pump, so it is simple structure, small volume, without repairing, no noise and easy being controlled. It can be stopped separating layer for the feeding material because the machine has high vacuum. QVC Series Pneumatic Vacuum Conveyor was designed according to international standard. It is easy cleaned and beautiful. It meets GMP requirement.
Characteristic:
Solve the problem thoroughly about the separating layer of material.
The sintered-metal filter is Japanese original.
It can be removed the material static electricity.
It is airtight without crossed contamination.
It is made in good quality stainless steel(304 and 316L).
It is made in non-toxic and corrosion resistant material.
Filter is easy cleaned.
It is controlled intelligently and automatically.
It is easy dismantled with building blocks structure.
It is easy set up and small volume, the weight is light
It is no noise and screening
It is economical and practical the cost is lower.
Working Principle
Vacuum feeder is a vacuum loading machine by using pneumatic vacuum pump as vacuum source. With this vacuum feeder materials could be fed directly from container into mixer, reactor, hopper, sheet press, packing machine, vibrating griddle, pellet trimming machine, hydro-state pelleter, dry-state pelleter and disintegrator. To use this feeder could lighten workers' labor intensity, put an end to powder pollution and ensure that the production process meets GMP requirements.
Â
| Model | Capacity (kg/h) |
Compressed air Consumption (Liter/min) |
Pressure of Supplied Air (MPa) |
Dimension |
| QVC-1 | 350 | 180 | 0.4_0.6 | Φ140x560 |
| QVC-2 | 700 | 360 | 0.4_0.6 | Φ213x720 |
| QVC-3 | 1500 | 720 | 0.4_0.6 | Φ290x850 |
| QVC-4 | 3000 | 1440 | 0.4_0.6 | Φ420x1150 |
| QVC-5 | 6000 | 2880 | 0.4_0.6 | Φ420x1150 |
| QVC-6 | 9000 | 4320 | 0.4_0.6 | Φ420x1350 |
| 1. Compressed air should be oil-free and water-free. 2. The feeding capacity has been determined by feeding distance and feature of products. 3.The feeding capacities are greatly different with different materials. | ||||
Â
Aluminum extruded finned tubes, also called [integral finned tubes" using the form of the base tube covered with aluminum tube(the base tube can be carbon steel, stainless steel, copper) through machine extrusion, forming a tube fin, the fin base and the tube outer wall is close fitting, this fin tubing control can make finned tubes with high heat transfer coefficient and heat transfer performance. Extruded Finned Tube can be made of iron, copper or aluminum tube by compound rolling, which has the advantages of tight bonding, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong anti-corrosion performance, not easy to deformation under long-term hot and cold working conditions, long working life and so on.
Copper Fin Tube,Copper Fin Tubing,Aluminum Fin Tube,Extruded Steel Tubing
Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com