10m Outdoor Steel Waste Waste Bin

  • Model NO.: 10m
  • Name: Hook Bin
  • Size: Customized
  • Color: According to Customer′s Requests
  • Trademark: Hero Equipment
  • Specification: 10cbm
  • HS Code: 86090090
  • Key Words: Hook Bin
  • Title: Hook Bin
  • Customized: Yes
  • Galvanizing: Available
  • Transport Package: No Packing
  • Origin: Yangzhou, China
I. Product Descriptions:
 
10m Outdoor Steel Waste Waste Bin
Material
Mild steel , in China we usually use Q235, which similar to grade 250 in Australia, we can also use Q345 which similar to grade 350 in Australia.
This gives you amazing value through greatly increased product life.
 

Thickness of plates used
3mm M/S plate for sides and 4mm M/S for floor. Thicker plates are available based on your requirements.
 

 Other specifications
1). PFC is used for bottom rails and front 'A' chassis
2). 50mm or 60mm round steel as hook bar .
3). Straight or curve bottom design
4). Double or single openning door
5). Painted or galvanized
6). Flat pack type or in completed
7). Crane hook on top
 

 Options
1) Casters
2) Lids
3) lifting eyes on top
4) bottom Channels
 

 Painting
We will paint each bin you order in your company colours, enhancing your company image with great looking bins.
Two times of primer + two times of top coat
Primer : zinc-based epoxy (Grey)
Top coat : Urethane  (Any color)
 




II. Certifications:

10m Outdoor Steel Waste Waste Bin



III.  Company & Factory:

 
10m Outdoor Steel Waste Waste Bin

10m Outdoor Steel Waste Waste Bin

10m Outdoor Steel Waste Waste Bin

10m Outdoor Steel Waste Waste Bin



IV. Service 
 
Good quality and strict QC system
Short delivery
Low price especially in Australia and New Zealand
Perfect after-sale service.If you have any questions, please contact me.
 
 
 V. Packing and Shipping
 
Usually we stack your bins with foam to protect your painting , also we can provide some paint with the bins for fixing when you  got the bins.
 
Fabricated or in flat packed type both available.
 
VI. Payment Method
 
Usually we need 30% as deposit, and balanced will be paid after sending you the scanned copy of documents like B/L,  Invoice packing list and so on.
 
 
 Welcome to visit our factory in China!  Now we have set our reception in Shanghai, and I will pick you up and accompany since Pudong Airport.
Please contact me if you have any questions. 



 

For SANY Cylinder Seal Kit

Installation steps for SANY hydraulic cylinder seals

Cylinder Seal Kit2
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.


For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com