Vehicle name: | Low density powder material transport semi-trailer |
| |
Vehicle model: | CSC9402GFL | ||
Chinese brand: | Chu Sheng card | ||
Exemption: | Yes | ||
Fuel: | Yes | ||
Manufacturer: | Xigong Chusheng ( Hubei ) Special Purpose Vehicle Manufacturing Co., Ltd. | ||
company address: | No.9 Jiliang Avenue , Economic Development Zone, Suizhou City | ||
Overall dimensions ( length / width / height ) : | 12400×2500×3990 | Cargo bed ( length / width / height ) : | |
Total mass (Kg) : | 40000 | Load quality utilization factor: | |
Curb weight (kg) : | 13000 | ||
Wheelbase (mm) : | 7300+1310+1310 | Axle load: | -/24000 ( with three axes installed ) |
Axis number: | 3 | Number of springs: | -/10/10/10 |
Number of tires: | 12 | Tire specifications: | 11.00R20 |
Front track: | 2036/2036 | Rear track: | 1840/1840/1840 |
Chassis configuration: | DeLong F3000 extended high ceiling cab with power steering, air brake, Fast 9- speed gearbox, Weichai 380- horsepower EGR engine, 7.5- ton MAN -type front axle, 16- ton MAN -type rear axle, onboard One air conditioner. | ||
Dedicated configuration: | Tank size ( straight length × maximum diameter ) (mm): 10430 × 2500, effective volume of the tank : 50 cubic meters, the cylinder body is made of 5mm manganese steel rolled, and the head is made of 5mm thick manganese steel standard oval seal The head is firmly welded and has the characteristics of high overall strength, good rigidity, good pressure resistance, and good performance. Sancang fluidized bed structure, Qingdao Sansen 10 cubic air compressor, upper aisle with hidden water tank, the rest of the factory according to the standard configuration and production. 15T Fuhua Bridge, 1100 wire tire, Weichai 4102 diesel engine group |
Continuous Waste Plastic Pyrolysis Plant
Continuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
NO. |
ITEM |
Technical Parameter |
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
2 |
Operating Mode |
Fully Continuous Operation |
3 |
Structure |
Horizontal Type Revolve |
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
5 |
Capacity(24h) |
8-20Mt |
6 |
Work Pressure |
Slightly Negative Pressure |
7 |
Oil Yield of tyres |
40%-45% |
8 |
Reactor Rotational Speed |
1R/M |
9 |
Installation Power |
110kw |
10 |
Cooling Method |
Cycle water |
11 |
Type of Drive |
Sprocket Wheel |
12 |
Heating Method |
Hot Air |
13 |
Noise dB(A) |
≤85 |
14 |
Main Reactor Weight (MT) |
About 20Mt |
15 |
Total Weight(MT) |
About 45Mt |
16 |
Installation Space Required |
60m*20m |
17 |
Manpower |
2/shift |
18 |
Shipment |
5*40HC |
19 |
Delivery time |
≤70Days |
Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl