[Introduction]
Standardization is the inevitable way for the industry to grow and develop, and it is also a hard condition for robbing the voice of the global market. As an emerging industry in the future leading lighting market, LED needs to improve the normative standards to guide the steady development of the industry.
To this end, Guangdong Province strives to implement a standardized development strategy, actively carries out research and implementation of LED lighting standard optical components, and promotes standardization in the entire manufacturing chain of LED lighting products. At present, LED lighting standard optical components are well organized, and the first batch of 21 technical specifications have been successfully released. The LED lighting standard optical component R&D and application alliance was established, with more than 100 participating companies.
Government: Going deep into the grassroots level and promoting the labeling of optical components. Recently, in order to promote the application of LED lighting standard optical components, the Deputy Director of the Development Planning Department of Guangdong Science and Technology Department, Yun Danping, and other leaders are in the LED lighting standard optical component project group of Guangdong Province. Accompanied by experts, the LED lighting enterprises in Guangdong Province were inspected to fully understand the progress of LED lighting standard optical components, and put forward policy and technical opinions on the problems encountered by various enterprises, and label production of standard optical components. Provide guidance and advice.
According to the GSC reporter, the leading experts of the Science and Technology Department have visited NVC Lighting, TCL, Foshan Lighting, Zhaoxin Group, Guoxing Optoelectronics, Hongli Optoelectronics, Jiuzhou Optoelectronics, Zhouming Technology, etc. since October 28. Enterprises, to understand their needs, docking LED lighting standard optical components labeling production situation, targeted to promote the application of standard optical components.
During the inspection, many companies praised the standard optical components, and considered that the standard optical components are easy to realize product serialization and component generalization, which reduces the production cost of the enterprise, helps to achieve large-scale production, and forms a manufacturing enterprise with specialization. The pattern promotes the adjustment of the industry segment and further enhances the core competitiveness of the company.
Institutions: Grafting standards, accelerating standardization and integration Under the government's push, the LED lighting standard optical component project team is also actively working with industry organizations to accelerate the integration of standard optical components with other similar standards.
On December 10th, the 43rd regular consultation meeting of the Guangdong LED Lighting Standard Optical Component General Expert Group was held in the Guangdong Provincial Institute of Standardization. Among them, the National Semiconductor Lighting Engineering R&D and Industry Alliance (CSA) standard CSA016 "LED lighting application interface requirements: self-heating, control device separate LED module street light / tunnel light" modified to form the "LU03LSD series LED lighting optical components in detail The Code passed the vote of the expert committee and was officially transformed into the technical specification of Guangdong standard optical components.
Since the signing of the strategic cooperation between the CSA and the Guangdong Provincial Department of Science and Technology in March 2013, the two sides have held three coordination meetings. In terms of standards, a standardization work docking technical group was established, which is responsible for the transformation of the EU LED standard optical components and CSA interface alliance standards. CSA016 is the first batch of conversion standards. After the expert committee voted, it will be released as the technical specification for Guangdong LED lighting standard optical components.
Enterprise: Actively applied to join the Optical Component Alliance from October 10th to 25th, 2013. In order to deepen the market and strengthen interaction, the LED Lighting Standard Optical Component R&D and Application Alliance Secretariat appointed an inspector to conduct research on some member units. During the same period, the company visited related LED companies to promote the application of standard optical components and promote the landing of LED standard optical components.
It is understood that the special investigation team has visited 50 companies involved in the production of lighting application products in Shenzhen, Zhaoqing, Huizhou, Dongguan, Jiangmen, Zhongshan and Zhuhai. During the investigation, the inspector introduced the value and significance of the standard optical components to the company and the work plan of the alliance, and the second batch of collections of current standard optical components and the person in charge of the company, the marketing department and the R&D department. In-depth discussions and exchanges were conducted. After listening to the inspector's work in detail, the company generally affirmed that the standard optical components are easy to achieve product serialization, component generalization, reduce the production cost of the enterprise, and will cooperate with and support the promotion of optical component projects. In addition, the company also put forward a lot of positive suggestions to the inspectors, and placed high hopes on the alliance. I hope that the alliance can proceed from the current situation and actual needs of the enterprise, and do more practical things for the enterprise.
It is reported that after the investigation and investigation, the Alliance Secretariat received a total of 25 companies to join the alliance application.
Boat kayak surfboard blow molding machine
Weifang Uyoung Iknow plastic machinery co,.ltd, , https://www.uyoungiknow.com