Reviewing the development of China’s mold industry over the past few years, our nation’s mold manufacturing industry has achieved a good overall level of development. The processing level of enterprises has been greatly improved, and the ability to earn foreign exchange through exports has been greatly enhanced. It has not only resisted the squeeze of overseas manufacturers in the domestic market, but also in the international market. The market showed strong competitiveness.
However, the International Model Association Secretary-General Luo Baihui pointed out that the domestic mold enterprises also exposed some problems in the development process, first, the scale is small, the second is low technology, the third is the narrow field, the fourth is the ability to influence the relevant industry Big. In Luo Baihui's view, the overall efficiency of the domestic mold manufacturing industry has not yet reached the best level, and its basic role in the national name economy is not yet obvious. In order to reverse the above situation, the domestic mold manufacturing also wants to exert greater influence in the international market. We must strengthen the integration of industry-wide technology and resources.
First, in the technical field, it is necessary to strengthen the division of labor. In recent years, despite the increase in exports of domestic molds, the level of international competition has increased. However, most of them are concentrated in middle and low-grade areas. The technical level of molds is low, the added value is low, and some high-precision molds are also imported. Therefore, the domestic mold manufacturing industry must strengthen integration in their respective fields, there is no need for transitional competition, and technological development. In order to implement division of labor and cooperation, relevant industries and enterprises must take a long-term perspective, make indiscretions, pay close attention to research on new technologies and new technologies, and gradually form a division of labor, collaboration, multi-field, and all-round research and development pattern. In the research process of proprietary intellectual property products, we must overcome the practice of door-to-door and single-handedness, because under the conditions of global integration today, we can build on the experience gained by our predecessors and colleagues. Forward-looking research, without having to immerse yourself in some technical work that others have already done, leads to a waste of talent and resources.
The second is to speed up the application of information technology to create a flexible and professional manufacturing platform, while continuing to meet the individual needs of customers, while improving their own scale and professional manufacturing. Mass customization is a breakthrough in the traditional production scale. It overcomes the dilemma of single-piece, small-batch, and scale-effectiveness and creates conditions for the improvement of the market competitiveness of China's molds. Luo Baihui said that the successful application of ERP technology has already produced obvious results in some mold manufacturing companies, providing possibilities for large-scale custom production. ERP technology will not only control the manufacturing companies themselves, but also extend the management to customers and suppliers, which will likely drive the development of the mold-related industries.
Luo Baihui believes that the whole process of supply chain system management must be implemented to change the large and complete, even small, all-round production operations. The traditional manufacturing methods of domestic mold enterprises are generally large-to-core, cavity-type, as small as a single screw to design and produce their own, resulting in long fronts, too few batches, both a waste of energy and resources, can not guarantee in every one The links can have advanced professional standards.
However, the International Model Association Secretary-General Luo Baihui pointed out that the domestic mold enterprises also exposed some problems in the development process, first, the scale is small, the second is low technology, the third is the narrow field, the fourth is the ability to influence the relevant industry Big. In Luo Baihui's view, the overall efficiency of the domestic mold manufacturing industry has not yet reached the best level, and its basic role in the national name economy is not yet obvious. In order to reverse the above situation, the domestic mold manufacturing also wants to exert greater influence in the international market. We must strengthen the integration of industry-wide technology and resources.
First, in the technical field, it is necessary to strengthen the division of labor. In recent years, despite the increase in exports of domestic molds, the level of international competition has increased. However, most of them are concentrated in middle and low-grade areas. The technical level of molds is low, the added value is low, and some high-precision molds are also imported. Therefore, the domestic mold manufacturing industry must strengthen integration in their respective fields, there is no need for transitional competition, and technological development. In order to implement division of labor and cooperation, relevant industries and enterprises must take a long-term perspective, make indiscretions, pay close attention to research on new technologies and new technologies, and gradually form a division of labor, collaboration, multi-field, and all-round research and development pattern. In the research process of proprietary intellectual property products, we must overcome the practice of door-to-door and single-handedness, because under the conditions of global integration today, we can build on the experience gained by our predecessors and colleagues. Forward-looking research, without having to immerse yourself in some technical work that others have already done, leads to a waste of talent and resources.
The second is to speed up the application of information technology to create a flexible and professional manufacturing platform, while continuing to meet the individual needs of customers, while improving their own scale and professional manufacturing. Mass customization is a breakthrough in the traditional production scale. It overcomes the dilemma of single-piece, small-batch, and scale-effectiveness and creates conditions for the improvement of the market competitiveness of China's molds. Luo Baihui said that the successful application of ERP technology has already produced obvious results in some mold manufacturing companies, providing possibilities for large-scale custom production. ERP technology will not only control the manufacturing companies themselves, but also extend the management to customers and suppliers, which will likely drive the development of the mold-related industries.
Luo Baihui believes that the whole process of supply chain system management must be implemented to change the large and complete, even small, all-round production operations. The traditional manufacturing methods of domestic mold enterprises are generally large-to-core, cavity-type, as small as a single screw to design and produce their own, resulting in long fronts, too few batches, both a waste of energy and resources, can not guarantee in every one The links can have advanced professional standards.
Automobile Timing Belt Opel Astra F Estate,Replace Timing Belt Opel Astra F Estate,Timing Belt Wheel Opel Astra F Estate,Automobile Timing Belt Opel Omega B
ZHEJIANG AOSITE AUTO PARTS CO.,LTD , https://www.aositebelt.com