Sanitation sweepers have different uses because they are used, so they can be classified into several categories according to their use. The dry cleaning method used in the dry sanitation sweeper is dust removal. As its name implies, the sanitation sweeper will not spray water during road cleaning. Therefore, the sanitation sweeper must be in the air duct and in the dustbin. Install the filter. When the dry sanitation sweeper is working, the amount of garbage that is inhaled from the location of the mouthpiece into the garbage bin that has a large proportion of the garbage when it enters the vehicle, because of the speed of the wind inside the dustbin of the sanitation sweeper, will be caused by a sharp decline. Natural settlement. If the inhaled dust is lighter than the dust, it will be blocked by the filter when it passes through the filter together with the air flow. However, because the sanitation sweeper's filters also have different forms, some dry sanitation sweepers can use sweeping dust to counter the sweep, and some dry sanitation sweepers are unable to prevent the filter from causing damage. In the case of a blockage, a device for spraying dust is not used.
The cleaning method used by the wet sanitation sweeper is the wet dust removal method. In other words, during the road sweeping process of the vehicle, except that the device is used to spray ultraviolet dust, the device is also sucker and The position of the suction nozzle is used to spray dust. The effect of spraying dust at the sweeping station is to allow the sweeper to sweep without dusting, and to decorate the sprayer at the position of the suction pipe and the suction nozzle. In order to enable the suction nozzle to suck in the fine dust, it can be moistened in the water mist and condensed into a larger area and volume of particles, and then settled in the dustbin conveniently.
WEISS MACHINERY CO., LTD. , https://www.weissmachinerys.com