1. The general safety procedures for cold work should be observed. Before work, check the equipment and electrical switches are in good condition, and open empty test. The coiler is not allowed to operate at overload.
2. The equipment must be operated by special personnel. Attention must be focused on during operation. It is forbidden to laugh and play.
3. When the sheet enters the roller, care must be taken to prevent the body from being bruised or cut. Prevent hands or clothing from being twisted into the rollers. It is forbidden to stand on the workpiece. Hot scald should prevent scalding.
4. It is forbidden to stand in the direction of entering and exiting the material after the sheet has fallen and when the machine tool is started.
5. The roller must be stopped when adjusting the roller and plate.
6. When working with rolling plates, there should be special personnel to direct, and the fixtures should be properly selected. They should cooperate with the driver and linking workers. When hoisting, they should strictly observe the operating rules of the hoisting cranes. When the coiling machine is in operation, driving is not allowed to change the loading condition of the hanging objects. .
7. Remove the rolled sheet and must stop and take measures to prevent the sheet from falling. When using the upper roller support, do not use too much force.
8. The rolled cylinder should be neatly placed and placed smoothly to prevent rolling injuries.
2. The equipment must be operated by special personnel. Attention must be focused on during operation. It is forbidden to laugh and play.
3. When the sheet enters the roller, care must be taken to prevent the body from being bruised or cut. Prevent hands or clothing from being twisted into the rollers. It is forbidden to stand on the workpiece. Hot scald should prevent scalding.
4. It is forbidden to stand in the direction of entering and exiting the material after the sheet has fallen and when the machine tool is started.
5. The roller must be stopped when adjusting the roller and plate.
6. When working with rolling plates, there should be special personnel to direct, and the fixtures should be properly selected. They should cooperate with the driver and linking workers. When hoisting, they should strictly observe the operating rules of the hoisting cranes. When the coiling machine is in operation, driving is not allowed to change the loading condition of the hanging objects. .
7. Remove the rolled sheet and must stop and take measures to prevent the sheet from falling. When using the upper roller support, do not use too much force.
8. The rolled cylinder should be neatly placed and placed smoothly to prevent rolling injuries.
Water Tank Wire Drawing Machine
wet type wire drawing machine,wet wire drawing machine,African water tank wire drawing machine
Dovin limited , https://www.dovinmachine.com