Recently, it is reported that Fuji Heavy Industries' Subaru brand plans to expand its distribution network in China, and the total number of dealerships will increase by 20% by the end of next year.
Subaru believes that the middle-income group in urban areas is the main consumer group of SUVs such as foresters. Currently, the total number of sub-Subaru dealers in China is 230, mostly located in northern cities. By the end of 2015, Subaru will have a total of 280 dealerships in China, a 20% increase over the current number, with a focus on setting up outlets in the eastern and southern regions.
In June of this year, Subaru's sales in China increased by 3.7% year-on-year to 4,592 units, up 27.5% year-on-year to 30,360 units in the first half of the year. The 18.8% landslide that occurred in July was 3,600.
The brand plans to achieve annual sales of 100,000 vehicles in China in 2016, which is expected to increase by more than 50% compared to 2014.
The internal structural design is vane, Vane Damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper
Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper
Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com